23.2
Hoofdspanningen
De grafische weergave van normale en schuifspanningsvergelijkingen wordt weergegeven door een cirkel, die de wisselwerking tussen deze spanningen onde…
The normal and shearing stress equations of the transformed plane, when graphed, form a circle that demonstrates their relationship for any given angular parameter.
The circle's center, relative to the vertical axis, represents the average normal stress, with its radius indicating the spread of these stress values.
The circle intersects the horizontal axis at two points, signifying the maximum and minimum normal stresses, occurring with zero shearing stress. These points define principal planes of stress where only normal stress, known as principal stress, exists.
The maximum and minimum normal stresses can be identified by adding or subtracting the average stress from the radius.
The principal plane that experiences maximum or minimum normal stress is identified by substituting the angular parameter into the normal stress equation.
The largest shearing stress is represented by points on the circle's vertical diameter, obtained when the normal stress equals the average stress, resulting in two 90° orientations that predict maximum shearing stress.
The planes of maximum shearing stress and the principal planes are 45° apart.
View the full transcript and gain access to JoVE Core videos
Q1: What does the circle represent when graphing normal and shearing stress equations?
The circle graphically depicts the relationship between normal and shearing stresses across different angular orientations. Its center represents the average normal stress, while its radius indicates the range of stress variations. This geometric representation, known as Mohr circle for plane stress, allows engineers to visualize how stresses transform as the plane orientation changes.
Q2: Where do principal stresses occur on the stress circle?
Principal stresses occur at points A and B where the circle intersects the horizontal axis, representing the maximum and minimum normal stresses with zero shearing stress. These intersection points define the principal planes of stress, where only normal stress exists. The principal plane carrying maximum or minimum normal stress is identified by substituting the angular parameter into the normal stress equation.
Q3: How are maximum and minimum normal stresses calculated from the circle?
Maximum and minimum normal stresses are determined by adding or subtracting the circle's radius to or from the average normal stress at the circle's center. The radius represents the spread of stress values, while the center value is the mean stress. This calculation provides the extreme normal stress values that materials experience under the given loading conditions.
Q4: What conditions produce maximum shearing stress in the stress circle?
Maximum shearing stress occurs at points along the circle's vertical diameter, where the normal stress equals the average stress. This condition produces two orientations, each 90 degrees apart, that predict peak shearing stress locations. The magnitude of maximum shearing stress equals the circle's radius.
Q5: What is the angular relationship between principal planes and maximum shearing stress planes?
The planes experiencing maximum shearing stress and the principal stress planes are oriented 45 degrees apart. This geometric relationship is fundamental to understanding stress distribution, as it reveals how normal and shearing stresses interact. This 45-degree offset is a key characteristic observed in stress transformations.
Q6: How do you identify which principal plane carries maximum versus minimum stress?
The principal plane experiencing maximum or minimum normal stress is identified by substituting the angular parameter into the normal stress equation. This calculation determines the specific orientation angle at which each principal stress acts. The result indicates whether that plane corresponds to the maximum or minimum stress value from the circle's intersection points.
Q7: Why is understanding principal stresses important for material analysis?
Principal stresses represent the extreme normal stresses a material experiences, which are critical for predicting failure and material behavior. Materials fail when stresses exceed their strength limits, making principal stress identification essential for design and safety analysis. This understanding connects directly to yield criteria for ductile materials under plane stress and other failure prediction methods.