Piloot- en numerieke relais

Pilot relaying is a form of differential protection that compares electrical quantities at widely separated transmission line terminals using communication channels. It provides primary zone protection without requiring complex relay settings or system fault calculations. Pilot relaying promptly detects and isolates faults in high-voltage transmission lines, typically rated between 69 and 115 kV, ensuring an uninterrupted power supply.

Pilot relaying uses four communication channels: pilot wires operating at DC or 50 to 60 Hz; power-line carrier using frequencies between 30 and 300 kHz; microwave transmitting 2 to 12 GHz signals via line-of-sight paths; and fiber optic cables employing light modulation through non-conducting cables. Each channel method enables comparison of electrical quantities across transmission lines up to 80 km apart.

Directional comparison assesses power flows at line terminals to identify fault direction, while phase comparison evaluates relative current phase angles at terminals. Both methods are primary fault detection techniques used in pilot relaying systems. Phase comparison focuses on angular relationships between currents, whereas directional comparison emphasizes power flow direction to determine fault location and direction.

Numeric relays use microprocessors and software for fault detection, offering compact size, reduced wiring, programmability, lower transformer burden, and multi-function capabilities. They provide improved sensitivity, reliability, and faster tripping speeds compared to traditional relays. Numeric relays can also auto-reset and analyze post-fault data to check system recovery and adapt settings to changing conditions.

Numeric relays are vulnerable to external power-system transients and cybersecurity risks, requiring compliance with North American Electric Reliability Corporation (NERC) security standards. Engineers must implement robust protection protocols and remote update capabilities to manage settings changes securely. Understanding these failure modes ensures reliable operation and prevents unauthorized access or system disruptions in modern power systems.

In decentralized protection, each relay receives information from local current and voltage transformers and trips only local breakers, ensuring reliability without relying on pilot relaying communication channels. This approach eliminates dependency on external communication systems. Numeric relays can integrate with centralized systems to enhance overall protection coordination and system reliability when pilot relaying is not required.

Pilot relaying is typically applied to transmission lines rated between 69 and 115 kV, usually up to 80 km in length, where terminals are far apart but communication channels remain practical and cost-effective. For longer distances, alternative protection methods like line protection with impedance relays may be more economical. The communication channel infrastructure required for pilot relaying becomes increasingly complex and expensive for very long transmission lines.