2.11
Uitbloei in metselwerk
Uitbloei in metselwerk muren verschijnt als een pluizig kristallijn poeder, vaak wit, dat ontstaat door in water oplosbare zouten in het metselwerk of…
Efflorescence appears as a crystalline powder patch, often white in color, on brick, stone, or concrete masonry surfaces.
When water infiltrates the masonry surface, water-soluble alkaline salts present in the masonry units or mortar dissolve in water.
Eventually, this water migrates to the surface and evaporates, leaving behind deposits of salts on the masonry surface.
Efflorescence that occurs soon after the completion of construction can be cleaned off using water and a brush.
Although efflorescence might reappear again, natural agents like rain can wash away the salt deposits, and with time, efflorescence reduces as the salts gradually leach out of the masonry.
Efflorescence appearing on the masonry walls of a building after several years indicates that water has recently started to penetrate the wall.
Rectifying the source of leakage will control further occurrences of efflorescence.
To prevent efflorescence, masonry units and mortar free of water-soluble salts are used, and water intrusion into the masonry walls is minimized.
The walls can be sheltered by providing proper roof drainage or applying waterproof barriers that prevent the entry of external moisture yet permit the outward migration of water vapor.
View the full transcript and gain access to JoVE Core videos
Q1: What causes efflorescence to appear on masonry surfaces?
Efflorescence forms when water infiltrates masonry and dissolves water-soluble alkaline salts present in the masonry units or mortar. As this water migrates to the surface and evaporates, it leaves behind crystalline salt deposits, typically appearing as white powder patches on brick, stone, or concrete surfaces.
Q2: How can you remove efflorescence that appears after construction?
Efflorescence appearing soon after construction can be cleaned using water and a brush. Although it may reappear initially, natural agents like rain gradually wash away salt deposits. Over time, efflorescence reduces as salts leach out of the masonry, and the deposits eventually diminish without requiring additional intervention.
Q3: What does efflorescence indicate if it appears years after construction?
Efflorescence appearing on masonry walls several years after construction completion signals that water has recently begun penetrating the wall. This indicates an active moisture problem requiring investigation. Identifying and repairing the source of the water leak is essential to control further efflorescence occurrences and prevent ongoing damage.
Q4: What preventive measures reduce efflorescence in masonry?
Preventing efflorescence involves using masonry units and clean mortar free of water-soluble salts. Minimizing water intrusion through proper roof drainage and applying waterproof coatings that permit water vapor outward migration are critical. Cavity drainage and flashings in masonry walls provide additional moisture barriers, while cavity wall construction offers enhanced protection against moisture intrusion.
Q5: How do waterproof coatings prevent efflorescence without trapping moisture?
Waterproof barriers applied to masonry walls prevent external moisture entry while allowing water vapor to migrate outward. This dual function stops salt-laden water from entering the masonry while permitting trapped moisture to escape, preventing salt accumulation and efflorescence formation on the surface.
Q6: Why is roof drainage important for controlling efflorescence?
Proper roof drainage directs water away from masonry walls, minimizing water infiltration that dissolves and transports water-soluble salts to the surface. By reducing the amount of water penetrating the masonry, adequate roof drainage significantly decreases the likelihood of salt deposition and efflorescence development on building surfaces.
Q7: What role does cavity wall construction play in preventing efflorescence?
Cavity wall construction creates an air space between masonry wythes that acts as a moisture barrier, providing superior protection against water infiltration compared to solid wall construction. This additional layer reduces the amount of water reaching the inner masonry surfaces, thereby minimizing salt dissolution and efflorescence occurrence.