Name: terminal velocity in a viscous fluid
Uploaded: 2025-05-22T09:06:09.000Z
Duration: 1 min 20 s
Channel: JoVE

Weźmy pod uwagę obiekt poruszający się w płynie. Warstwy płynu w pobliżu obiektu są ciągnięte wraz z nim i doświadczają prędkości względnej, co powoduje działanie lepkiej siły na obiekt. Siła lepkości zależy od kształtu, rozmiaru, prędkości i właściwości płynu obiektu. 
W przypadku ciała sferycznego poruszającego się wewnątrz płynu siła lepkości jest proporcjonalna do promienia kuli, prędkości i lepkości płynu.
Rozwiązując równanie wymiarowo, daje zależność siły lepkości od tych parametrów. Otrzymane wyrażenie to prawo Stokesa, wskazujące, że siła lepkości jest wprost proporcjonalna do prędkości obiektu.
Jeśli kula zostanie upuszczona przez płyn, ciężar obiektu ciągnie ją w dół, podczas gdy siły lepkości i wyporu działają w górę.
Wraz ze wzrostem prędkości spowodowanym przyspieszeniem zwiększa się siła lepkości. Kiedy siła lepkości równoważy ciężar i wyporność, kula spada ze stałą prędkością, zwaną prędkością końcową.
W przypadku cieczy o dużej lepkości prędkość końcową można zmierzyć doświadczalnie. Następnie, korzystając z prawa Stokesa, można uzyskać lepkość.

<ol>
	<li>Verma, H.C. (2008). Pojęcia fizyki. Tom 1, Bharati Bhawan Pub. & Dis.: sekcje 14.17, 14.18; strony 291–292.</li>
</ol>

prawo stokesa

Stokes' Law

Siły lepkości, takie jak tarcie, to siły międzycząsteczkowe, które przeciwstawiają się względnemu ruchowi cząsteczek względem siebie. Kiedy ciało stałe porusza się w cieczy, siły lepkości ciągną je w przeciwnym kierunku. Wielkość siły zależy od kształtu i wielkości ciała stałego, a także jego prędkości oraz współczynnika lepkości, gęstości i temperatury cieczy.

Wyrażenie siły działającej na stały, kulisty obiekt w płynie nazywa się Stokesowskim. prawo. Stokes'a prawo obowiązuje tylko dla płynów o niskiej liczbie Reynoldsa, co oznacza, że ma zastosowanie tylko wtedy, gdy przepływ płynu jest laminarny, a nie turbulentny. Eksperymentalnie stwierdzono, że siła działająca na obiekt stały jest proporcjonalna do promienia i prędkości obiektu, a także do współczynnika lepkości cieczy. Kolejność zależności każdej zmiennej można uzyskać poprzez analizę wymiarową. Stałą proporcjonalności uzyskuje się eksperymentalnie.

Ruch kulistego ciała stałego w cieczy można analizować, korzystając z drugiej zasady dynamiki Newtona. Początkowo nie występuje opór lepkości, ponieważ ciało stałe znajduje się w spoczynku. Siła wypadkowa skierowana w dół, określona przez różnicę jej ciężaru i siły wyporu cieczy, zwiększa jej prędkość w dół. Jednakże zwiększenie prędkości zwiększa opór lepkości. Gdy występuje znaczny opór lepkości w górę, nie ma siły wypadkowej ze względu na trzy siły równoważące się wzajemnie: ciężar skierowany w dół, wyporność w górę i opór lepkości w górę. Ciało stałe osiąga wówczas stałą prędkość, zwaną prędkością końcową.

Prawo Stokesa

Siły lepkościowe, takie jak tarcie, to siły międzycząsteczkowe, które opierają się względnemu ruchowi cząsteczek względem siebie. Kiedy ciało stałe porusza się przez ...

/files/media/science-education/science-education-thumbs/14736.jpg

Education

JoVE Core

Physics

Fizyka

Unit 1

Jednostka 1

Fluid Mechanics

Mechanika płynów

KEY TERMS AND CONCEPTS

Kluczowe terminy i pojęcia

terminal velocity in a viscous fluid

Viscous forces act like friction in a liquid. They resist the relative motion of molecules and pull back on a solid body moving through the fluid. The size of this force depends on the body’s shape and size, its speed, and the liquid’s viscosity, density, and temperature.

For a spherical solid object, the force in a fluid is described by Stokes’ law. This law applies only at low Reynolds number, when the flow is laminar and not turbulent. Experiments show that the force is proportional to the sphere’s radius, its speed, and the liquid’s viscosity coefficient. Dimensional analysis helps determine how these variables depend on one another, while the proportionality constant is found experimentally.

A sphere moving through a liquid can also be studied with Newton’s second law. At first, the sphere has no viscous drag because it is at rest. The downward net force, which comes from the difference between its weight and the liquid’s buoyant force, makes it speed up.

As the speed increases, the viscous drag also increases. Eventually, the upward viscous drag becomes large enough to balance the downward weight and the upward buoyant force. When these three forces balance, there is no net force, and the sphere continues at a steady speed called terminal velocity.

Terminal Velocity in a Viscous Fluid

characteristics of fluids

Fluid Behavior Under Force

Fluid behavior under force differs from the behavior of solids. When a force acts parallel to the top surface of a solid, the solid resists it because of internal friction between its layers. This is called shearing resistance. If the force is removed, the shearing forces help the solid return to its original shape. Other deformation forces can also change the shape of a solid for a short time, as long as the force stays below a threshold magnitude. Solids usually keep their shape, which makes...

/files/media/science-education/science-education-thumbs/14710.jpg

density

Density, Floating, and Specific Gravity

Density helps explain why objects sink or float in a fluid. It is also useful for identifying a substance and for learning about its phase and substructure. The SI unit of density is kg/m3, and the cgs unit is g/cm3. Liquids and solids usually have densities that are roughly comparable. That matches the fact that their atoms are in close contact. Gases have much lower densities than liquids and solids because their atoms are separated by large amounts of empty space. Density does not always...

pressure of fluids

Fluid Pressure in Everyday Life

Fluid pressure appears in many everyday situations, including blood pressure and weather systems. The same force can have a very different effect depending on the area it acts on. A force spread over 1 mm² creates 100 times more pressure than the same force spread over 1 cm². That is why a sharp needle can pierce skin with a small force, while the same force from a finger usually does not. Pressure is especially important when studying fluids. A fluid does not offer much resistance to a force...

variation of atmospheric pressure

Atmospheric Pressure and Altitude

Atmospheric pressure and altitude are closely linked. As height increases, atmospheric pressure decreases. This happens because the gravitational force per unit area becomes smaller as we move away from Earth’s surface. To describe this change, the atmosphere is treated with a constant air temperature at a given altitude. The ideal gas law of thermodynamics is also used as a good approximation for the air. Let p(y) be the atmospheric pressure at height y. The density ρ at y, the temperature T...

/files/media/science-education/science-education-thumbs/14711.jpg

pascal's law

Pascal’s Principle in Static Fluids

Pascal’s principle explains how pressure changes move through a fluid that is not flowing. A fluid at rest is in static equilibrium. If the fluid is water, it is in hydrostatic equilibrium. In this state, the net force on any part of the fluid must be zero, or the fluid will begin to flow. Blaise Pascal described this idea in 1653 in Treatise on the Equilibrium of Liquids. He showed that when pressure changes in an enclosed fluid, that change is transmitted without loss through the fluid and...

application of pascal's law

Hydraulic Force Transfer with Pascal's Law

Hydraulic force transfer uses Pascal's law to move pressure through an enclosed fluid. Pascal showed experimentally that a change in pressure applied to a confined fluid is transmitted undiminished throughout the fluid and to the walls of its container. That idea is the basis of hydraulics, a major part of modern mechanical technology. Hydraulic systems appear in automotive brakes, hydraulic jacks, and many other machines. A simple hydraulic system uses two pistons at the same height. Because...

pressure gauges

Gauge vs Absolute Pressure

Pressure gauges often show pressure relative to atmospheric pressure. Many gauges, including those on scuba tanks, are set to read zero at atmospheric pressure. That reading is called gauge pressure. When the pressure inside the tank is higher than atmospheric pressure, the gauge shows a positive value. Some gauges can also measure negative pressure. This is useful in a vacuum chamber, which is a rigid chamber where some air has been pumped out. Because the pressure inside the chamber is below...

/files/media/science-education/science-education-thumbs/14712.jpg

archimedes' principle

Buoyant Force from Fluid Pressure

Archimedes' principle explains buoyant force in a fluid. An upward buoyant force acts on an object that is partially or fully immersed in a fluid. This force is equal to the weight of the fluid displaced by the object. To see why an object floats, imagine removing a submerged object from the fluid. The space it occupied would be filled by fluid with weight w_fl. That weight is supported by the surrounding fluid, so the buoyant force must match the weight of the displaced fluid. The principle...

density and archimedes' principle

How Buoyancy Depends on Density

Buoyancy and density explain why some objects float and others sink. A lump of clay sinks in water, but the same clay can float when it is shaped like a boat. The change in shape lets it displace more water, which increases the buoyant force even though its mass stays the same. The same idea applies to steel ships. An object with an average density lower than the surrounding fluid will float. The fluid has more mass in the same volume, so it has more weight. The buoyant force equals the weight...

accelerating fluids

Fluid Pressure in an Accelerating Elevator

Fluid pressure changes when a liquid accelerates inside a moving container. A beaker placed in an elevator that moves upward with constant acceleration is one example. In this setup, the pressure and buoyant force equations must be modified. To find the pressure difference, the liquid is modeled as a thin vertical cylinder with height h and an infinitesimal cross-sectional area, ΔS. Three vertical forces act on this small fluid element. The liquid below the bottom surface pushes upward, the...

/files/media/science-education/science-education-thumbs/14713.jpg

surface tension and surface energy

Why Liquids Form Drops and Float

Surface tension and surface energy explain why liquids behave the way they do at their surface. A paint brush moves freely in water, but its bristles stick together after it is taken out. That change is caused by surface tension. Inside a liquid, bulk molecules feel attractive forces from nearby molecules in all directions. At the surface, molecules feel a net downward pull from the molecules below them. Because of this imbalance, the liquid surface acts like a stretched membrane and tries to...

/files/media/science-education/science-education-thumbs/14714.jpg

excess pressure inside a drop and a bubble

excess-pressure-inside-a-drop-and-a-bubble

Surface Tension in Drops and Bubbles

Surface tension sets the pressure difference in small drops and bubbles. For a tiny liquid drop, gravity can be neglected, so the drop is treated as spherical. It can also be viewed as two equal hemispherical drops joined together by surface tension. The forces on the drop come from three sources. The liquid inside pushes outward, the air outside pushes inward, and surface tension acts along the diameter between the two hemispheres. Since surface tension is force per unit length, it creates a...

/files/media/science-education/science-education-thumbs/14715.jpg

buoyancy

Buoyant Force in Sinking and Floating

Buoyant force explains why objects float, sink, or stay suspended in a fluid. A fluid can be a liquid or a gas, and every object placed in it experiences this upward force. A metal ball sinks, while a rubber ball floats. A submarine also changes its buoyancy to move up or down. The force comes from pressure changes in the fluid. Fluid pressure increases with depth because the weight of the fluid above also increases. That means the bottom of an object feels more pressure than the top. This...

contact angle

Wetting and Surface Curvature

Wetting and surface curvature describe how a liquid behaves where it meets a solid. When a solid is dipped into a liquid, the liquid surface can bend near the contact line. In some cases, the liquid rises along the solid. In others, the surface becomes convex or depressed near the solid. This behavior comes from cohesive and adhesive forces. Adhesive force is the attraction between molecules of different materials, such as a solid and a liquid. Cohesive force is the attraction between...

/files/media/science-education/science-education-thumbs/14737.jpg

rise of liquid in a capillary tube

Capillary Action in Thin Tubes

Capillary action explains why liquid can rise or fall in a very thin tube compared with the liquid around it. A capillary is a narrow cylindrical tube, and the effect becomes noticeable when it is dipped into a liquid. The movement happens because two forces act in opposite directions. Cohesive forces make liquid molecules stick to each other, so the liquid tends to hold together and form a rounded shape. Adhesive forces pull the liquid toward the walls of the container. In a narrow glass...

/files/media/science-education/science-education-thumbs/14738.jpg

laminar and turbulent flow

Fluid Motion Patterns in Air and Water

Fluid dynamics studies fluids in motion. Scientists often use velocity vectors to show fluid motion in places like meteorology. For example, wind in the atmosphere can be mapped with vectors that show the speed and direction of the wind at each point. Another way to show fluid motion is with a streamline. A streamline shows the path of a small volume of fluid as it flows. When the flow changes with time, the streamlines do not match the flow lines. The fluid velocity is always tangential to...

equation of continuity

Fluid Flow in Narrowing Pipes

Fluid flow in a pipe is described by flow rate and average speed. Flow rate, or volume flow rate, is the amount of fluid that passes a point through an area in a given time. It depends on both how fast the fluid moves and the size and shape of the conduit. For a river or pipe, a greater speed usually means a greater flow rate. A larger cross-sectional area also increases flow rate. That is why the same fluid can move differently through conduits of different sizes. The relationship becomes...

bernoulli's equation

Fluid Pressure and Speed in Motion

Bernoulli's equation connects fluid pressure with fluid speed. It helps explain why moving fluids can create pressure changes in everyday situations. One example is when two trains pass each other quickly and seem to pull inward. The same effect can happen when two cars pass each other at high speed. As the air between the trains or cars speeds up, its pressure drops. The air on the outside stays at atmospheric pressure. That pressure difference creates a net inward force on the vehicles.

bernoulli's principle

Fluid Pressure and Speed Changes

Bernoulli's equation links fluid pressure and fluid speed in a static, incompressible fluid. For horizontal flow, where gravitational energy density stays constant, the equation is especially useful. In that setting, the result is known as Bernoulli's principle. Bernoulli's principle says that fluid pressure drops when speed increases, and pressure rises when speed decreases. This pressure-speed relationship helps explain how moving fluids behave in simple flow situations. It also provides a...

bernoulli's principle: applications

Bernoulli's Principle in Fluid Devices

Bernoulli's principle helps explain how many fluid devices work when the fluid moves at a constant height. It is useful for devices that use fast flow to create low pressure and for devices that measure fluid speed. Some devices use this pressure change to pull one fluid into another. These are called entrainment devices. A Bunsen burner uses an adjustable gas nozzle to entrain air for proper combustion. An atomizer uses a squeeze bulb to make a jet of air that pulls perfume drops into the...

/files/media/science-education/science-education-thumbs/14739.jpg

energy conservation and bernoulli's equation

energy-conservation-and-bernoulli-s-equation

Bernoulli’s Equation in Streamlined Flow

Bernoulli’s equation describes energy in a moving fluid. It comes from the conservation of energy principle, or the work-energy theorem, applied to an incompressible, inviscid fluid in laminar, steady, irrotational flow. The equation says that pressure energy, potential energy, and kinetic energy per unit volume stay constant along a streamline. Each term has the units of energy per unit volume. The kinetic energy per unit volume is called kinetic energy density, and the potential energy per...

/files/media/science-education/science-education-thumbs/14753.jpg

viscosity

Viscosity and How Fluids Flow

Viscosity describes how easily a fluid flows. Water moves quickly, while honey and maple syrup flow slowly and stick to a surface. That difference comes from fluid friction between liquid layers and between a fluid and the material around it. In this example, water has a lower viscosity than honey and maple syrup. Viscosity is measured in newton-second per meter squared (N·s/m2) or pascal-second (Pa·s). It also changes with temperature and can differ from one fluid to another by several orders...

poiseuille's law and reynolds number

Fluid Resistance, Viscosity, and Flow Regime

Fluid resistance, viscosity, and flow regime shape how liquid moves through a horizontal tube. Fluid flows from high pressure to low pressure. The flow rate, Q, is the ratio of the pressure difference to the resistance in the tube. A larger pressure difference gives a higher flow rate. Poiseuille's law describes laminar flow of an incompressible fluid in a tube. In this relation, the factors that affect flow rate except pressure are grouped into resistance. Resistance depends on the tube size...

stokes' law

Viscous forces act like friction in a liquid. They resist the relative motion of molecules and pull back on a solid body moving through the fluid. The size of this force depends on the body’s shape and size, its speed, and the liquid’s viscosity, density, and temperature. For a spherical solid object, the force in a fluid is described by Stokes’ law. This law applies only at low Reynolds number, when the flow is laminar and not turbulent. Experiments show that the force is proportional to the...

key terms and concepts

Learn how viscous drag, buoyancy, and weight act on a sphere in a liquid, and how Stokes’ law leads to terminal velocity in low Reynolds number flow.

Terminal Velocity in a Viscous Fluid | JoVE K12

physics

JoVE Core Physics introduces the theory and application of fundamental physics topics, including kinematics, dynamics, fluid mechanics, statics, waves, and acoustics, with concise and easy-to-understand animated videos. Additionally, the scientist-in-action videos demonstrate the application of related concepts in classical and original research experiments performed in today's laboratories worldwide.

Terminal Velocity in a Viscous Fluid

Description

Transcript

Tags