Name: preparing standard solutions in the lab
Uploaded: 2024-12-05T18:31:54.000Z
Duration: 1 min 14 s
Channel: JoVE

Roztwór wzorcowy to roztwór o dokładnie znanej ilości substancji. Jest przygotowywany z pierwotnego wzorca - wysoce czystej, hydrofilowej i stabilnej substancji o wysokiej masie molowej.
Przygotowanie polega na dokładnym odważeniu odpowiedniej ilości wzorca pierwotnego w łódce wagowej i przeniesieniu jej do kolby miarowej za pomocą lejka. Pusta łódź wagowa jest ponownie ważona w celu sprawdzenia, czy nie ma pozostałej substancji stałej.
Dodać niewielkie ilości wody destylowanej, aby spłukać ciała stałe z lejka do kolby. Kolba miarowa jest obracana w celu całkowitego rozpuszczenia ciała stałego. Dodaje się więcej wody, aż jej poziom zbliży się do znaku kalibracji. W tym momencie woda jest pipetowana, aby zwiększyć poziom roztworu dokładnie do znaku kalibracji.
Kolba jest kilkakrotnie zamykana i odwracana, aby zapewnić całkowite wymieszanie. Oznaczyć kolbę składem chemicznym, stężeniem i datą przygotowania.
To pierwotne rozwiązanie wzorcowe służy do standaryzacji wzorców wtórnych – mniej czystych i mniej stabilnych substancji.

roztwory standardowe

Roztwory standardowe odnoszą się do roztworów o dokładnie znanym stężeniu lub składzie. Podstawowy standard to wysoce czysta, o dużej masie molowej, stabilna substancja, która jest całkowicie rozpuszczalna w wodzie, najczęściej stosowanym rozpuszczalniku w chemii analitycznej. Podstawowy standardowy roztwór może być używany do standaryzacji wzorców wtórnych, które są substancjami o znanych stężeniach, ale są mniej czyste i stabilne. Roztwory standardowe są niezbędne do uzyskania dokładnych i wiarygodnych wyników w procedurach analitycznych, więc zrozumienie ich jest kluczowe dla każdego, kto pracuje w warunkach laboratoryjnych.

Przygotowanie roztworu standardowego przy użyciu podstawowego standardu obejmuje kilka kroków:

<ul style="list-style-type: disc; display: flex; flex-direction: column; gap: 10px; padding: 0 0 0 40px;">
 <li>Ważenie podstawowego standardu: Użyj łódeczki wagowej, aby zważyć odpowiednią ilość podstawowego standardu. Ważne jest, aby użyć wagi umożliwiającej dokładne pomiary.
 </li>
 <li>Przenoszenie standardu do kolby miarowej: Użyj lejka, aby ostrożnie przenieść zważony podstawowy standard do czystej i suchej kolby miarowej. Upewnij się, że cała substancja stała została przeniesiona z łódki wagowej do kolby. Po przeniesieniu ponownie zważ pustą łódkę wagową, aby potwierdzić, że nie pozostały żadne pozostałości.
 </li>
 <li>Umycia lejka: Użyj niewielkich ilości wody destylowanej, aby zmyć wszelkie ciała stałe z lejka do kolby miarowej. Dzięki temu cały podstawowy standard zostanie rozpuszczony w roztworze.
 </li>
 <li>Rozpuszczenia ciała stałego: Obracaj kolbą miarową, aż ciało stałe całkowicie się rozpuści. Może być konieczne stopniowe dodawanie wody, aż ciało stałe całkowicie się rozpuści.
 </li>
 <li>Zbliżenia się do linii kalibracyjnej: Dodaj więcej wody destylowanej, aby poziom roztworu zbliżył się do znaku kalibracyjnego na szyjce kolby miarowej. Upewnij się, że ciało stałe jest całkowicie rozpuszczone przed dodaniem większej ilości rozpuszczalnika, aby uniknąć przekroczenia linii kalibracyjnej.
 </li>
 <li>Dostosowania menisku: Użyj pipety, aby dodawać wodę kropla po kropli, aż dno menisku (krzywa na powierzchni cieczy) będzie dokładnie wyrównane ze znakiem kalibracyjnym. Ten krok zapewnia, że ​​roztwór ma prawidłową objętość i stężenie.
 </li>
 <li>Wymieszania roztworu: Dokładnie zamknij kolbę miarową i odwróć ją kilka razy, aby zapewnić całkowite wymieszanie roztworu.
 </li>
 <li>Etykieta: Oznacz kolbę miarową składem chemicznym, stężeniem roztworu i datą przygotowania. Informacje te pomagają w prawidłowym zidentyfikowaniu i wykorzystaniu rozwiązania.
 </li>
</ul>

Roztwory standardowe

Roztwory wzorcowe odnoszą się do roztworów o dokładnie znanym stężeniu lub składzie. Podstawowym standardem jest wysoce czysta, wysoka masa molowa, stabilna ...

Education

JoVE Core

Analytical Chemistry

Chemia analityczna

Unit 1

Jednostka 1

Method Development and Sampling Techniques

Opracowywanie metod i techniki pobierania próbek

method-development-and-sampling-techniques

KEY TERMS AND CONCEPTS

KLUCZOWE POJĘCIA I KONCEPCJE

Standard Solutions

preparing standard solutions in the lab

Standard solutions are prepared to have a precisely known concentration or composition. In analytical chemistry, this accuracy is important because it supports reliable results. A primary standard is a highly pure, stable substance with a high molar mass. It is fully soluble in water, which is the most commonly used solvent in analytical chemistry.

A primary standard solution can be used to standardize a secondary standard. Secondary standards have known concentrations, but they are usually less pure and less stable. This makes primary standards especially useful when exact measurements are needed in a laboratory setting.

The preparation starts by weighing the primary standard with a balance that gives precise measurements. The solid is then transferred through a funnel into a clean, dry volumetric flask. It is important to move all of the material from the weighing boat into the flask. The empty weighing boat is reweighed to confirm that no residue remains.

Next, small amounts of distilled water are used to wash any solid from the funnel into the volumetric flask. The flask is then swirled until the solid dissolves completely. More water is added gradually until the liquid is close to the calibration line on the neck of the flask.

The final volume is set by adjusting the meniscus, which is the curved surface of the liquid. A pipette is used to add water drop by drop until the bottom of the meniscus lines up exactly with the calibration mark. The flask is then closed and inverted several times to mix the solution well. At the end, the flask is labeled with the chemical composition, the solution concentration, and the preparation date.

Preparing Standard Solutions in the Lab

development of analytical methods

Analytical Methods: Technique to Protocol

Analytical methods follow a clear path from technique to protocol. In analytical chemistry, a technique is the scientific principle used to explain a chemical measurement. A method applies that technique to a sample of interest. The next steps are procedure and protocol. A procedure gives the directions for carrying out the analysis with an analytical method. A protocol is the detailed set of guidelines for that procedure, and it should be followed closely to get the desired results. <br...

quality control

Quality Control Charts and Lab Records

Quality control charts, proficiency testing, and lab records are key parts of quality control in a laboratory. These steps help keep a system under statistical control. They also help track data, show trends, and spot variations that may affect the accuracy of an analysis. One common tool is a quality control chart. This chart plots one or more analytical characteristics over time. The measured values are taken at different times during the analysis and compared with the known value of...

quality assurance

Quality Checks in Analytical Testing

Quality assurance in analytical testing brings together the checks that help a system perform properly. It includes quality control, quality assessment, and internal corrective measures. These parts work in a cycle to support reliable results. Quality control happens before and during the analysis. Quality assessment takes place during and after the investigation. Internal corrective measures are then based on the results of post-analysis quality assessment, or they may be applied before a new...

data validation

How Analytical Methods Are Checked

Method validation checks whether an analytical chemistry method gives reliable results. It is especially important when the same method is used with different sample matrices or when the procedure is changed. Validation helps show that the method still meets acceptable standards in each case. Several key checks are used in method validation. Specificity means the method can measure the target analyte without interference from other substances. Linearity means the result changes in direct...

qualitative analysis

Classical and Instrumental Sample ID

Qualitative analysis identifies the elements, ions, or compounds in an unknown sample. It is the first step in the hierarchy of analytical goals. That makes it the starting point for scientific study before quantitative analysis or other forms of analysis. Two main approaches are used in qualitative analysis: classical methods and instrumental methods. Classical methods depend on the visible or sensory result of a chemical reaction, such as a color change, a precipitate, or even a smell. These...

quantitative analysis

Measuring Analyte Concentration

Quantitative analysis measures the amount of a specific substance, called the analyte, in a sample. If the sample composition is unknown, qualitative analysis comes first. That step identifies the components so the correct substances can be measured during the quantitative phase. This method depends on two key measurements. Scientists measure the sample quantity and also a property that is proportional to the amount of analyte. Together, these measurements help determine the analyte...

instrument calibration

Calibrating Lab Instruments for Accurate Results

Calibration helps lab instruments produce accurate and consistent results. It is important in manufacturing, healthcare, testing laboratories, and scientific research. Each instrument needs a calibration process that matches its design and function. This process improves data accuracy and helps results stay reliable. An analytical balance measures mass and needs regular calibration to stay precise. It is calibrated by comparing its readings with known standard weights. These weights act as...

glassware calibration

Calibrating Lab Glassware for Accurate Volume

Calibrating lab glassware helps students measure liquids accurately in the analytical laboratory. It reduces volume errors and supports consistent results across measurements. This matters when using volumetric flasks, pipettes, burettes, and other tools that depend on precise volume readings. Volumetric flasks are used to prepare aqueous solutions with a precise final volume. They have a calibration line on the neck. To calibrate one, fill it with distilled water until the meniscus, the...

standard solutions

Standard solutions are prepared to have a precisely known concentration or composition. In analytical chemistry, this accuracy is important because it supports reliable results. A primary standard is a highly pure, stable substance with a high molar mass. It is fully soluble in water, which is the most commonly used solvent in analytical chemistry. A primary standard solution can be used to standardize a secondary standard. Secondary standards have known concentrations, but they are usually...

blank solutions

Blank Solutions in Analytical Testing

Blank solutions are used in analytical testing to show the background signal before a sample is measured. A blank solution does not contain the analyte, which is the substance of interest being tested or measured. It is usually made with the same reagents and procedure as the sample solution, but without the analyte. The main purpose of a blank solution is to control for background interference and contamination. Reagents, solvents, or lab equipment can sometimes create a detectable signal on...

sampling methods: overview

How Sampling Shapes Lab Results

Sampling shapes lab results by determining how a smaller sample represents a larger population. In analytical chemistry, testing an entire population is often impractical or impossible, so samples are collected to make inferences about the whole group. The sampling method is the process used to choose individuals or items for that sample. Common sampling methods include random, judgemental, systematic, stratified, and cluster sampling. Each method can affect the quality of the data in a...

sampling methods: sample types

Sampling Materials in Solid, Liquid, Gas

Sampling materials are grouped as solid, liquid, or gas. The type of sample helps decide the right collection method. Solid samples can include sediments from water bodies, soil, metals, and biological tissues. Sediment sampling from water bodies can be done in two common ways. Grab sampling uses a device to collect a discrete sample from the bottom with minimal disturbance. These samples may not show the full area because conditions can vary from place to place. Piston coring collects a...

sampling plans

Choosing Samples for Reliable Results

Sampling is a key step in analytical chemistry. It helps researchers collect data that represents a larger population. The main sampling methods in this topic are random, judgmental, systematic, stratified, and cluster sampling. Random sampling gives each member of the population an equal chance of being chosen. Researchers often use a random number generator or a lottery-style method. For example, a polymer sheet can be divided into 1 cm x 1 cm sections, and 10 sections can be selected at...

sample preparation for analysis: overview

Preparing Samples by State and Form

Sample preparation depends on the state and form of the sample before analysis. It helps make the sample ready for accurate measurement. The main goal is to extract the analyte, which is the substance being measured, and remove parts that could interfere with the analysis. Solid samples often need the most handling. Large solids are usually ground, crushed, or milled to make them smaller and increase surface area. The sample is then sieved and mixed so it has a uniform composition. After that,...

sample preparation for analysis: advanced techniques

sample-preparation-for-analysis-advanced-techniques

Preparing Complex Samples for Analysis

Preparing complex samples for analysis often requires special digestion and fusion methods. Samples with inorganic or organic material can be hard to dissolve or break down. Common sample preparation methods include acid digestion, fusion, dry ashing, and wet digestion. These steps help turn difficult samples into forms that can be tested reliably and again with similar results. Acid digestion is often used for inorganic materials that do not dissolve in water. It is useful for soil and...

sample handling

Sample Transport and Storage Basics

Sample transport and storage help keep specimens intact before testing. Moving a sample from the collection point to the laboratory requires careful handling. The sample should be sealed well and clearly labeled. These steps help prevent cross-contamination and support reliable results. Temperature control is also important during transport. Some samples travel in insulated containers, cool packs, or refrigerated vehicles so they stay within the needed temperature range. After the samples...

contaminants and errors

Sampling Errors in Sample Preparation

Sampling errors in sample preparation can affect the accuracy of laboratory results. Two common problems are concentration bias from poor sample splitting and contamination from reducing particle size by grinding or homogenization. Recognizing these errors helps make analysis more reliable. The number of samples also matters when a target population follows a normal distribution. In that case, the sample size ns can be found with a formula that uses the t-value for the chosen confidence level,...

key terms and concepts

Learn how standard solutions are prepared from a primary standard using a volumetric flask, accurate weighing, meniscus adjustment, and proper labeling.

Preparing Standard Solutions in the Lab | JoVE K12

analytical chemistry

JoVE Core Analytical Chemistry simplifies complex chemical principles by breaking them down into clear, engaging animations, making topics from SI Units to NMR spectroscopy more accessible and straightforward. Additionally, the scientist-in-action videos highlight the application of these concepts in real-world research conducted in laboratories globally.

Preparing Standard Solutions in the Lab

Description

Transcript

Tags