Idealna dioda

An ideal diode has two terminals: the anode (positive terminal) and the cathode (negative terminal). When positive voltage is applied to the anode relative to the cathode, the diode conducts current in a forward-biased state. When the cathode is at higher potential, the diode is reverse-biased and blocks current flow, functioning as an open switch.

When reverse-biased, an ideal diode acts as an open circuit with no current flow. This occurs when negative voltage is applied or the cathode is at higher potential than the anode. Unlike practical diodes that exhibit small leakage current, an ideal diode completely blocks current in this state, making it useful for controlling current direction in circuits.

Ideal diode I-V characteristics are piecewise linear with two perpendicular straight-line segments: a vertical line showing conduction under forward bias and a horizontal line showing no current in reverse bias. Real diodes exhibit gradual curves with small forward-biased voltage drops and non-zero reverse-biased leakage current. The ideal model simplifies circuit analysis by eliminating these practical effects.

An ideal diode exhibits zero voltage drop when forward-biased, behaving as a perfect short circuit. This means the full input voltage appears across the load. In contrast, practical diodes show a small forward-biased voltage drop, typically 0.6-0.7 volts for silicon diodes, which the ideal model ignores for simplified analysis.

During positive half-cycles of AC input, the ideal diode conducts and output voltage equals input voltage. During negative half-cycles, the diode blocks current, producing zero output voltage. This unidirectional output has a finite average DC component, converting alternating current into direct current for powering electronic devices.

The ideal diode model simplifies circuit analysis by eliminating small voltage drops and leakage currents present in real diodes. This piecewise linear representation makes hand calculations and conceptual understanding easier for students and engineers. The model remains accurate for many practical applications where these small effects are negligible compared to circuit voltages.

The polarity of applied voltage determines the diode's bias state. Forward bias occurs when positive voltage is applied to the anode relative to the cathode, allowing current flow. Reverse bias occurs when negative voltage is applied or the cathode potential exceeds the anode potential, blocking current. This voltage relationship controls the diode's conduction state.