Linie bezstratne

A lossless transmission line has a purely imaginary propagation constant and resistive characteristic impedance. Its equivalent pi circuit contains imaginary series impedance and shunt admittance. When the product of the phase constant and line length is less than pi, the line exhibits inductive series impedance and capacitive shunt admittance, ensuring no power loss occurs during signal propagation.

Wavelength is the physical distance required for voltage or current phase to change by 2π radians. It is calculated using the signal's propagation velocity on the line. This wavelength determines the electrical length of the transmission line and its phase characteristics, which are critical for understanding how signals behave across the conductor.

Surge impedance loading (SIL) is the power delivered when a load resistance equals the line's surge impedance. Under SIL conditions, voltage remains constant along the line, and constant real power flows from sending to receiving end with zero reactive power. This ideal condition is calculated using the rated voltage and surge impedance values.

Real power lines are rarely terminated by their surge impedance, causing non-uniform voltage profiles. At no load, voltage increases from sending to receiving end due to the Ferranti effect. During short circuits, voltage drops to zero at the receiving end. Full-load profiles lie between these extremes, generally higher than short-circuit but lower than no-load profiles.

ABCD parameters describe the relationship between input and output voltages and currents on a transmission line. For lossless lines, these parameters indicate an equivalent pi circuit with imaginary series impedance and shunt admittance. They are fundamental to characterizing line behavior and predicting how electrical quantities propagate through the transmission line.

On a lossless line at surge impedance loading, constant real power flows from the sending end to the receiving end while reactive power flow is zero. Real power represents actual energy delivery to the load, whereas reactive power would indicate energy oscillating back and forth. This zero reactive power condition is unique to surge impedance loading and represents optimal power transfer.

ABCD parameters emerge from solving transmission line differential equations, which govern voltage and current behavior along the line. These parameters encapsulate the solution to those equations and provide a compact representation of line characteristics. Understanding transmission line differential equations is essential for deriving and interpreting ABCD parameters used in lossless line analysis.