Força Eletromotriz f.e.m.

When a conducting rod moves through a magnetic field, the magnetic force acts on positive charges within the rod, pushing them toward one end. This charge accumulation creates an electric field that opposes further charge movement. The potential difference that develops across the rod persists as long as the rod continues moving, generating a motional emf.

When a moving rod forms a closed conducting loop with a stationary U-shaped conductor, free charges redistribute throughout the loop. This redistribution of charges generates a current in the closed loop. The moving rod acts as a source of motional emf that drives this current flow through the complete circuit.

According to Faraday's law, the magnitude of motional emf equals the rate of change of magnetic flux through the loop. As the conducting rod moves, the area of the loop changes, altering the magnetic flux passing through it. This changing flux directly determines the induced emf in the system.

Magnetic flux depends on the strength of the magnetic field, the area through which field lines pass, and the field's orientation relative to the surface. In motional emf systems, the area changes as the rod moves, causing flux variation. Any change in these three factors produces a corresponding change in magnetic flux.

In motional emf systems, the power delivered by the rod's motion must equal the power dissipated by the induced current. This energy conservation principle ensures that mechanical work done moving the rod is converted into electrical energy and then into heat through resistance in the circuit.

A rail gun replaces the conducting rod with a projectile and uses controlled magnetic field changes to decrease flux between the rails. This flux decrease causes current to flow through the armature holding the projectile. The current-carrying armature experiences a magnetic force that propels the projectile forward.

The magnetic force on positive charges within the moving rod pushes them toward one end, leaving negative charges at the other end. This charge separation continues until the resulting electric field creates an electric force strong enough to balance the magnetic force, establishing equilibrium.