Preparação de Amostras para Análise: Técnicas Avançadas

The fusion technique is used when inorganic materials cannot be dissolved by acid digestion alone. The sample is mixed with a flux material in a 1:10 or 1:20 ratio, heated in a platinum crucible to create a molten mixture, then cooled to form a new material soluble in water or dilute acid. This method effectively handles resistant inorganic compounds.

Hydrochloric acid dissolves chlorides, oxides, carbonates, metals, and ores. Nitric acid breaks down organic matter and oxidizes metals, making it ideal for biological tissues. Sulfuric acid acts as a strong dehydrating agent for resistant samples like sulfides. Aqua regia, a nitric and hydrochloric acid mixture, effectively dissolves noble metals like gold and platinum.

Dry ashing heats organic samples in a muffle furnace at high temperature in the presence of atmospheric oxygen. The combustion of organic material generates an inorganic residue called ash. This ash can then be dissolved in an appropriate solvent for further analysis, making it suitable for analytical work.

Flux material reacts with insoluble inorganic samples at high temperatures to form a molten mixture. Common fluxes include sodium carbonate for iron and chromium alloys, potassium disulfate for refractory oxides, and lithium tetraborate mixed with lithium sulfate for rapid dissolution of silicates. The flux transforms resistant materials into water-soluble forms.

Finely grinding or crushing the insoluble solid sample increases its surface area, allowing more effective reaction with acids. Greater surface area exposure accelerates the digestion process and improves the dissolution efficiency of inorganic materials, leading to more complete sample preparation for analysis.

Wet digestion uses a mixture of acids to break down organic material, while dry ashing heats samples in a muffle furnace with atmospheric oxygen to produce an inorganic residue. Both methods decompose organic materials, but wet digestion employs chemical breakdown through acids, whereas dry ashing relies on combustion.

After cooling, the molten mixture solidifies into a new material that is soluble in water or dilute acid. This transformed solid can then be dissolved and prepared for further analytical work, making previously insoluble inorganic compounds accessible for quantitative and qualitative analysis.