8.8
Potência em um Circuito Trifásico
Os sistemas trifásicos têm duas configurações: estrela e delta. Uma configuração em estrela pode ter três ou quatro fios; na configuração delta, os co…
Uma fábrica com várias máquinas pesadas requer energia significativa fornecida por um sistema trifásico balanceado.
Para determinar a potência instantânea absorvida pela carga da planta, a análise é realizada em um circuito no domínio do tempo conectado em Y.
As tensões de fase têm uma diferença de fase de 120 graus e a raiz quadrada de dois é usada para converter tensões de pico em valores RMS para uma análise precisa da potência.
Quando uma máquina opera, ela extrai corrente da fonte de alimentação, levando a um atraso de fase entre as correntes de fase e suas tensões de fase correspondentes.
A potência instantânea total consumida pela carga da máquina é calculada somando a potência instantânea em cada uma das três fases.
A potência instantânea total obtida permanece quase constante e não muda com o tempo. Isso permite o cálculo da potência ativa, reativa e aparente por fase.
A potência ativa total é a soma das potências ativas em três fases. Da mesma forma, a potência reativa e aparente total é calculada.
Esses resultados são válidos para cargas conectadas em Y e delta.
View the full transcript and gain access to JoVE Core videos
Q1: Why does instantaneous power remain constant in a balanced three-phase system?
In a balanced three-phase system, instantaneous power remains constant because the sum of instantaneous powers across all three phases stays steady over time. Although individual phase powers fluctuate, the symmetry and 120-degree phase relationships between phases ensure their combined effect produces a constant total. This stability is a key advantage of three-phase systems for industrial applications.
Q2: How is total active power calculated in a three-phase circuit?
Total active power in a three-phase circuit is calculated by summing the active power from each of the three phases. In a balanced system, the average power per phase equals one-third of the total average power. This calculation method applies equally to both wye-connected and delta-connected loads, making it a universal approach for three-phase power analysis.
Q3: What is the relationship between phase and line quantities in three-phase power calculations?
Phase quantities refer to voltages and currents at each individual phase, while line quantities represent values between phases or between phase and neutral. Power calculations use relationships between line and phase voltages and currents to determine total power. The power consumed by loads connected at the phase end can be calculated using these relationships in both wye and delta configurations.
Q4: How do wye and delta configurations differ in power calculations?
Both wye and delta configurations calculate total power by summing power across three phases. In wye systems, loads connect to each phase with a neutral reference, while delta systems form a closed loop. Despite these structural differences, the equivalence between configurations extends to power calculations, allowing the same total power formula to apply to both topologies.
Q5: What role does phase lag play in three-phase power analysis?
Phase lag occurs when current drawn by a machine lags behind its corresponding phase voltage. This phase difference affects the relationship between voltage and current, influencing active and reactive power calculations. The phase lag determines how much real power is consumed versus reactive power, which is critical for understanding load behavior in manufacturing plants and industrial systems.
Q6: How are reactive and complex power related to active power in three-phase systems?
Reactive power represents energy oscillating between source and load without performing useful work, while complex power combines both active and reactive components. In a balanced three-phase system, reactive power per phase equals one-third of total reactive power, mirroring the active power relationship. Complex power, which integrates both components, follows the same one-third proportionality rule across phases.
Q7: Why is RMS voltage used instead of peak voltage in three-phase power calculations?
RMS (root mean square) voltage provides an equivalent DC value that accurately represents the power-delivering capability of AC voltage. The conversion from peak to RMS voltage uses the square root of two factor, ensuring accurate power analysis for time-domain circuits. This standardization allows engineers to calculate instantaneous and average power correctly in balanced three-phase systems serving industrial loads.