21.2
Vigas Prismáticas: Solução de Problemas
Ao se projetar uma viga de madeira sujeita a uma carga distribuída, tanto as dimensões físicas da viga como as características da madeira, tais como o…
Uma viga de madeira simplesmente apoiada deve ser projetada para suportar uma carga distribuída. O comprimento e a largura da viga são conhecidos, juntamente com os valores de tensão normais permitidos. A profundidade do feixe precisa ser determinada.
Para resolver isso, todo o feixe é considerado um corpo livre, e os balanços de momento e força são escritos para determinar as reações nos suportes.
Os diagramas de força de cisalhamento e momento fletor para a viga são então desenhados. O valor do momento fletor é zero em ambas as extremidades.
O valor máximo absoluto do momento fletor é então determinado considerando a área sob a curva de cisalhamento.
O módulo mínimo permitido da seção agora é calculado usando o valor absoluto do momento fletor e a tensão permitida fornecida.
A altura mínima exigida na viga de madeira é finalmente determinada usando a relação entre as dimensões da viga e o módulo de seção mínimo permitido.
Esta profundidade é a mínima necessária para garantir que a viga possa suportar com segurança as cargas impostas sem exceder a tensão permitida.
View the full transcript and gain access to JoVE Core videos
Q1: How do you find support reactions for a simply supported timber beam?
Treat the entire beam as a free body and write moment and force balance equations at the supports. Sum all vertical forces and moments to solve for the reaction forces at each support. These reactions are essential inputs for constructing shear force and bending moment diagrams that guide the design process.
Q2: What do shear force and bending moment diagrams reveal about beam design?
Shear force and bending moment diagrams show how internal forces vary along the beam's length. The maximum bending moment typically occurs at the beam's midpoint for uniformly distributed loads. These diagrams identify critical locations where stress is highest, enabling designers to calculate the minimum section modulus needed for safe design.
Q3: How is the minimum section modulus calculated in beam design?
Divide the maximum absolute bending moment by the allowable normal stress for the timber material. This quotient represents the minimum section modulus required to prevent the beam from exceeding allowable stress limits. The section modulus directly relates to the beam's cross-sectional geometry and determines its load-carrying capacity.
Q4: Why does timber grade and species matter in beam design calculations?
Timber grade and species determine the allowable stress values used in design calculations. Different timber types have different strength characteristics and allowable stresses. These material properties directly influence the minimum section modulus and ultimately the beam depth required to safely support the applied loads.
Q5: What is the final step in determining a timber beam's minimum depth?
Calculate the beam's minimum depth using the relationship between the beam's cross-sectional dimensions and the minimum allowable section modulus. This depth ensures the beam can carry imposed loads without exceeding allowable stress or deflection limits. The calculated depth is the minimum necessary for structural integrity and safety.
Q6: How does the bending moment diagram help determine beam depth?
The bending moment diagram shows where maximum bending moment occurs, typically at the midpoint for uniformly distributed loads. By identifying this maximum value and applying the design formula with allowable stress, engineers calculate the required section modulus. This modulus then determines the minimum beam depth needed for design of prismatic beams for bending.
Q7: What role does the area under the shear curve play in beam design?
The area under the shear force curve represents the bending moment at any section along the beam. By calculating this area, designers determine the maximum absolute bending moment value needed for section modulus calculations. This relationship between shear and bending moment is fundamental to the systematic design approach for timber beams.