32.5
Linhas De Transmissão: Operação Transitória
A coordenação de isolamento é o processo de combinar a resistência do isolamento do equipamento elétrico com as características do dispositivo de prot…
O isolamento elétrico, como visto na fiação doméstica, é crucial para a segurança, evitando choques elétricos e curtos-circuitos, cobrindo materiais condutores com materiais isolantes, como plástico ou borracha.
A resistência do isolamento do equipamento varia com o tempo, mas pode suportar altas sobretensões transitórias, desde que sejam de curta duração.
Para testar a resistência do isolamento, uma onda de tensão de impulso padrão é usada. Essa forma de onda é definida pelo tempo que leva para a tensão atingir seu pico e decair para metade de seu valor de pico.
O valor de pico disso define o Nível Básico de Isolamento, ou BIL. Os equipamentos que atendem aos BILs padrão podem suportar aplicações repetidas da forma de onda padrão sem falha de isolamento.
Alguns equipamentos, como o isolamento de linhas de transmissão aéreas, são auto-restauráveis após um curto-circuito, enquanto o isolamento interno do transformador requer reparo ou substituição em caso de falha.
Dispositivos de proteção, conectados em paralelo com o equipamento de cada fase ao solo, protegem o equipamento contra sobretensões que excedam seu BIL, proporcionando uma margem de proteção.
Um exemplo simples de um dispositivo de proteção é a folga da haste, projetada para acender em sobretensões especificadas.
View the full transcript and gain access to JoVE Core videos
Q1: What is the Basic Insulation Level and how is it determined?
The Basic Insulation Level, or BIL, is the peak value of a standard impulse voltage waveform used for testing equipment insulation strength. This waveform is defined by specific times for voltage to reach its peak and decay to half that peak value. Equipment meeting standard IEEE-defined BILs can withstand repeated applications of this waveform without insulation failure.
Q2: Why do protective devices need to limit voltage during overvoltages?
Protective devices limit voltage to protect equipment from overvoltages exceeding its insulation capacity. Connected in parallel between each phase and ground, these devices must provide high impedance during normal operation and low impedance during surges. This voltage limiting prevents insulation breakdown and equipment damage while maintaining system stability.
Q3: What is the protection margin in insulation coordination?
The protection margin is the difference between the equipment's breakdown voltage and the protective device's ceiling voltage. This margin ensures the protective device operates before equipment insulation fails. A proper protection margin is essential for reliable equipment operation and is determined through engineering judgment and cost considerations during insulation coordination design.
Q4: How do rod gaps function as protective devices?
Rod gaps are simple protective devices designed to spark over at specified overvoltages, creating a conduction path that diverts excess voltage to ground. They operate by providing high impedance during normal conditions and transitioning to low impedance when overvoltage thresholds are exceeded, protecting connected equipment from voltage surges.
Q5: What is the difference between self-restoring and non-restoring insulation?
Overhead transmission line insulation is self-restoring after a short circuit, automatically recovering its insulating properties. In contrast, internal transformer insulation requires repair or replacement upon failure. This distinction affects maintenance strategies and equipment design choices in power system protection planning.
Q6: How does insulation coordination protect power systems from overvoltage damage?
Insulation coordination matches equipment insulation strength with protective device characteristics to prevent overvoltage damage. By ensuring protective devices limit voltage below equipment withstand capacity, coordination maintains system stability and equipment longevity. This process involves analyzing lossy lines and overvoltages to select appropriate protective measures.
Q7: What characteristics must surge arresters have to be effective?
Effective surge arresters must provide high impedance during normal operation to minimize losses, low impedance during surges to limit voltage, and effectively dissipate or store surge energy. After the surge passes, they must return to open-circuit conditions. Common types include air-gap designs with resistors and gapless surge arresters.