6.7
Teste Vebe
O teste Vebe é um método usado para medir a trabalhabilidade do concreto, particularmente eficaz para misturas de concreto seco. Este teste emprega um…
O ensaio de Vebe é realizado em concreto para identificar sua trabalhabilidade, preferencialmente para misturas secas.
O aparelho de teste compreende uma câmara cilíndrica medindo nove polegadas e meia de diâmetro e oito polegadas de altura, um cone de queda e um cavaleiro transparente em forma de disco. Toda essa configuração é posicionada em uma mesa vibratória.
Um cone de abatimento padrão colocado no cilindro é preenchido com concreto de maneira padrão, e o cone de abatimento é removido, deixando o concreto fresco na forma de um cone truncado.
Em seguida, um piloto transparente em forma de disco de 6 libras suportado pelo aparelho é colocado no topo do cone de concreto.
Operando a 50 ciclos por segundo, a mesa vibratória induz um movimento vertical para facilitar a compactação do concreto no cilindro.
O concreto no cilindro é considerado completamente compactado quando o condutor transparente está totalmente obscurecido, indicando que não há vazios visíveis na superfície do concreto.
A trabalhabilidade da mistura, indicada pela energia necessária para a compactação total do concreto, é medida em segundos Vebe, que é a duração da transição do concreto de uma forma de cone de abatimento para um cilindro.
View the full transcript and gain access to JoVE Core videos
Q1: What is the Vebe test and why is it used for concrete?
The Vebe test measures the workability of concrete, particularly for dry mixes. It uses a cylindrical chamber, slump cone, and transparent disc-shaped rider on a vibrating table. The test quantifies how much energy is needed to fully compact concrete, expressed in Vebe seconds. This measurement helps engineers assess concrete's ease of handling and placement.
Q2: What are the main components of the Vebe test apparatus?
The Vebe test apparatus consists of a cylindrical chamber measuring nine and a half inches in diameter and eight inches in height, a standard slump cone, a 6-pound transparent disc-shaped rider, and a vibrating table. The transparent rider sits on top of the concrete and becomes obscured when compaction is complete, allowing technicians to measure the time required for full consolidation.
Q3: How is the Vebe test procedure performed on fresh concrete?
Concrete is placed into a slump cone within the cylindrical chamber and compacted in a standard manner. The cone is then removed, leaving concrete in a truncated cone shape. A transparent disc-shaped rider is placed on top, and the vibrating table operates at 50 cycles per second. The test ends when the rider becomes fully obscured, indicating complete compaction with no visible voids.
Q4: What do Vebe seconds indicate about concrete workability?
Vebe seconds measure the time for concrete to transition from a slump cone shape to a fully compacted cylinder under vibration. Higher Vebe seconds indicate lower workability, meaning the concrete is stiffer and harder to compact. Lower Vebe seconds suggest higher workability, with concrete being more fluid and easier to handle and place.
Q5: How does the vibrating table contribute to the Vebe test?
The vibrating table operates at 50 cycles per second, inducing vertical movements that facilitate concrete compaction within the cylinder. These vibrations help consolidate the concrete and eliminate air voids. The duration of vibration needed until the transparent rider becomes fully obscured represents the energy required for complete compaction, directly reflecting the concrete's workability.
Q6: What does it mean when the transparent rider becomes fully obscured in the Vebe test?
When the transparent rider becomes fully obscured by concrete, it indicates that compaction is complete and no visible voids remain on the concrete surface. This moment marks the end of the test, and the elapsed time from the start of vibration is recorded as Vebe seconds. This measurement quantifies the concrete's workability and its resistance to compaction.
Q7: Why is the Vebe test particularly suitable for dry concrete mixes?
The Vebe test is designed to measure workability for dry concrete mixes, which are stiffer and require more energy to compact than wet mixes. The vibrating table's mechanical action effectively consolidates these drier mixtures, making the test ideal for assessing their handling characteristics. The Vebe seconds measurement provides a reliable indicator of how much effort is needed to achieve full compaction in stiff concrete.