Name: resonance forms in lewis structures
Uploaded: 2020-09-03T13:38:28.000Z
Duration: 2 min 52 s
Channel: JoVE

K12 Standards

north-carolina-k-12-science-standard-course-of-study

North Carolina K-12 Science Standard Course of Study

9-12

Chemistry

Matter and its Interactions

PS.Chm.3.1

Resonance

Most molecules and ions can be represented using unique Lewis structures. However, certain compounds can be shown by multiple, equally valid Lewis structures. 

Consider the Lewis structure for sulfur trioxide. The single bonds between each oxygen and the central sulfur atoms satisfy the octet for oxygen atoms. However, to reach a full octet for the sulfur, an additional bond must be formed between sulfur and one of the oxygen atoms. Since any of the three oxygens can form the double bond with sulfur, three different Lewis structures can be drawn. 

These multiple Lewis structures are called resonance structures, where the skeletal structures remain the same, but electrons are distributed differently.

All three structures are valid and equivalent representations of the molecule, yet all are non-existent in nature. The actual structure does not oscillate between the resonance structures but is a hybrid or an average of the three Lewis structures, which can be measured in bond lengths. 

In sulfite, the length of a sulfur-oxygen single bond is 1.51 angstrom, while in sulfur trioxide, the sulfur-oxygen bond length is 1.42 angstrom. Thus, in the hybrid molecule, the bond length is an intermediate between single and double bonds. 

In hybrid molecules, electrons participating in double bonds or lone pairs are often delocalized over multiple bonds or atoms, meaning they are not stationary on one particular atom. The delocalization reduces the potential energy of electrons resulting in stabilization called resonance stabilization. 

Resonance is also observed for aromatic compounds such as benzene. Benzene is a hexagonal carbon-ring with one hydrogen bonded to each of the carbon atoms, and alternating single and double bonds between the carbon atoms. Based on the location of carbon-carbon double bonds, benzene can have two resonance structures. 

Recall that double bonds are usually shorter than single bonds. However, all the carbon-carbon bonds in benzene have equal bond lengths, which are intermediate between carbon-carbon single and double bonds. 

Hence, benzene exists as a resonance hybrid and can be represented as a hexagon with a circle inside. The circle indicates that benzene is a blend of two resonance structures, and the double bonds cannot be localized to any two specific carbon atoms.

resonance

The Lewis structure of a nitrite anion (NO2&#8722;) may actually be drawn in two different ways, distinguished by the locations of the N-O and N=O bonds. 

<img alt="Structural formulas of nitrite ion, showing resonance; diagram illustrating bond arrangement." src="/files/core/CDNSource/lessons/1064/1064Image_1.svg" style="height: 40px;" data-altupdatedat="1761830439000" data-alt="Figure1" />

If nitrite ions do indeed contain a single and a double bond, the two bond lengths are expected to be different. A double bond between two atoms is shorter (and stronger) than a single bond between the same two atoms. However, experiments show that both N&#8211;O bonds in NO2&#8722; have the same strength and length, and are identical in all other properties. It is not possible to write a single Lewis structure for NO2&#8722; in which nitrogen has an octet and both bonds are equivalent.

Instead, the concept of resonance is used: if two or more Lewis structures with the same arrangement of atoms can be written for a molecule or ion, the actual distribution of electrons is an average of that shown by the various Lewis structures. The actual distribution of electrons in each of the nitrogen-oxygen bonds in NO2&#8722; is the average of a double bond and a single bond. 

The individual Lewis structures are called resonance forms. The actual electronic structure of the molecule (the average of the resonance forms) is called a resonance hybrid of the individual resonance forms. A double-headed arrow between Lewis structures indicates that they are resonance forms.

<img alt="Nitrite ion resonance structures, molecular formula diagram, illustrating electron delocalization." src="/files/core/CDNSource/lessons/1064/1064Image_2.svg" style="height: 40px;" data-altupdatedat="1761830439000" data-alt="Figure2" />

The carbonate anion, CO32&#8722;, provides a second example of resonance. 

<img alt="Resonance structures of carbonate ion, CO3^2-, showing electron delocalization, chemical diagram." src="/files/core/CDNSource/lessons/1064/1064Image_3.svg" style="height: 80px;" data-altupdatedat="1761830439000" data-alt="Figure3" />

<ul>
	<li>One oxygen atom must have a double bond to a carbon to complete the octet on the central atom. </li>
	<li>All oxygen atoms, however, are equivalent, and the double bond could form from any one of the three atoms. This gives rise to three resonance forms of the carbonate ion. </li>
	<li>Since three identical resonance structures can be written, the actual arrangement of electrons in the carbonate ion is known to be the average of the three structures. </li>
	<li>Again, experiments show that all three C&#8211;O bonds are exactly the same.</li>
</ul>

Always remember that a molecule described as a resonance hybrid never possesses an electronic structure described by either resonance form. It does not fluctuate between resonance forms; rather, the actual electronic structure is always the average of that shown by all resonance forms. 

George Wheland, one of the pioneers of resonance theory, used a historical analogy to describe the relationship between resonance forms and resonance hybrids. A medieval traveler, having never before seen a rhinoceros, described it as a hybrid of a dragon and a unicorn because it had many properties in common with both. Just as a rhinoceros is neither a dragon sometimes nor a unicorn at other times, a resonance hybrid is neither of its resonance forms at any given time.

Like a rhinoceros, it is a real entity that experimental evidence has shown to exist. It has some characteristics in common with its resonance forms, but the resonance forms themselves are convenient, imaginary images (like the unicorn and the dragon).

This text is adapted from <a href="https://openstax.org/books/chemistry-2e/pages/7-4-formal-charges-and-resonance">Openstax, Chemistry 2e, Section 7.4: Formal Charges and Resonance.</a>

The Lewis structure of a nitrite anion (NO2&minus;) may actually be drawn in two different ways, distinguished by the locations of the N-O and N=O ...

Education

JoVE Core

Chemical Bonding: Basic Concepts

KEY TERMS AND CONCEPTS

resonance forms in lewis structures

Resonance forms in Lewis structures help explain molecules and ions that cannot be shown correctly with just one drawing. In nitrite ion, NO2−, the Lewis structure can be drawn in two ways. The N-O and N=O bonds switch positions in the two drawings, but the atoms stay in the same arrangement.

If nitrite really had one single bond and one double bond, the two bond lengths should be different. A double bond is shorter and stronger than a single bond between the same atoms. Experiments show that both N-O bonds in NO2− have the same length, strength, and other properties. That means the real structure is not one Lewis form alone.

Resonance is the idea used when two or more Lewis structures with the same atom arrangement can be written for one species. The actual electron distribution is an average of the electrons shown in the different forms. In NO2−, each N-O bond has an average of a single bond and a double bond. The separate Lewis structures are called resonance forms, and the real structure is called a resonance hybrid.

A double-headed arrow is written between resonance forms to show this relationship. Carbonate ion, CO3 2−, is another clear example. One oxygen must form a double bond to carbon to complete the carbon octet, but any of the three oxygen atoms can make that bond. This gives three resonance forms, and experiments show that all three C-O bonds are exactly the same.

A resonance hybrid never has the electronic structure of just one resonance form. It does not switch back and forth between forms. Instead, it always exists as the average of all the resonance forms. George Wheland used a historical comparison to explain this idea. A medieval traveler who had never seen a rhinoceros described it as a hybrid of a dragon and a unicorn, but a rhino is neither one at different times. In the same way, resonance forms are useful imaginary pictures, while the resonance hybrid is the real entity shown by evidence.

Resonance Forms in Lewis Structures

types of chemical bonds

Chemical Bonding and Bond Properties

Chemical bonding explains how atoms and ions join to form molecules and compounds. American chemist Gilbert N. Lewis pioneered chemical bonding theory with the Lewis model. This model helps explain why bonds form, why some are stronger than others, and why compounds have fixed formulas like H2O instead of H4O. Ionic bonding involves ions, which are atoms or molecules with an electrical charge. A cation is a positive ion formed when a neutral atom loses one or more electrons from its valence...

lewis symbols and the octet rule

Valence Electrons, Lewis Symbols, and Bonding

Chemical bonds form when atoms or ions interact in ways that lower the potential energy of a molecule. Gilbert N. Lewis created a simple model to show bond formation using valence electrons, the electrons in the outer shell. In this model, electrons are shared or transferred to help atoms reach a stable electron configuration. The Lewis model helps describe two common bond types. An ionic bond forms when electrons move from a metal to a nonmetal. A covalent bond forms when two nonmetals share...

ionic bonding and electron transfer

Ionic Compounds and Crystal Lattices

Ionic compounds form when positive and negative ions attract each other. A cation is a positive ion, and it forms when an atom loses one or more valence electrons. An anion is a negative ion, and it forms when an atom gains one or more valence electrons. Compounds made of these ions are called ionic compounds, or salts, and the force between them is an ionic bond. The properties of ionic solids help show how strong this attraction is. They usually form rigid, brittle crystals and have high...

the born-haber cycle

Predicting Ionic Stability with Lattice Energy

Lattice energy helps explain why ionic compounds are stable. It measures the strength of attraction between positive and negative ions in a crystal. In one common definition, lattice energy is the energy required to separate one mole of an ionic solid into gaseous ions, so it has a positive value. Another definition uses the opposite sign and describes the energy released when gaseous ions form a lattice. When checking data, it is important to confirm which convention is being used. In either...

trends in lattice energy: ion size and charge

trends-in-lattice-energy-ion-size-and-charge

Lattice Energy Patterns in Ionic Solids

Lattice energy shows how strongly ions hold an ionic solid together. It is the energy required to separate one mole of a solid into its gaseous ions. For sodium chloride, this process requires 769 kJ per mole. The opposite convention may also be used, where lattice energy is the energy released when gaseous ions form the solid. In either case, a larger magnitude means a more stable ionic compound. For ionic crystals, lattice energy follows a pattern based on charge and ion size. The...

covalent bonding and lewis structures

Shared Electrons in Covalent Molecules

Covalent molecules form when atoms share electrons instead of transferring them. This bonding usually happens between nonmetal atoms with similar tendencies to attract electrons. Because the atoms pull on the electrons in a shared way, the bond is held together by mutual attraction. Covalent compounds often have physical properties that differ from ionic compounds. The attraction between neutral molecules is weaker than the attraction between charged ions. As a result, many covalent compounds...

electronegativity

Electronegativity and Polar Bonds

Electronegativity helps explain why some covalent bonds are nonpolar and others are polar covalent. It is a measure of how strongly an atom attracts shared electrons toward itself. That pull controls how electron density is distributed in a bond. Linus Pauling proposed the first electronegativity values by studying bond energies in heteronuclear molecules such as hydrogen fluoride. He expected the bond energy of HF to be about the average of the bond energies of H2 and F2, or 296 kJ/mol. The...

bond polarity, dipole moment, and percent ionic character

bond-polarity-dipole-moment-and-percent-ionic-character

How Bond Polarity Shapes Molecular Dipoles

Bond polarity depends on electronegativity, the ability of an atom to attract shared electrons. The absolute value of the electronegativity difference, or ΔEN, gives a rough guide to bond type. When the difference is very small or zero, the bond is covalent and nonpolar. When it is larger, the bond may be polar covalent or ionic. Examples show how this works in real compounds. H–H has a ΔEN of 0, so it is nonpolar. H–Cl has a ΔEN of 0.9, so it is polar covalent. Na–Cl has a ΔEN of 2.1, so it...

lewis structures of molecular compounds and polyatomic ions

lewis-structures-of-molecular-compounds-and-polyatomic-ions

Drawing Lewis Structures with Valence Electron Counts

Drawing Lewis structures starts with counting valence electrons and building the atom arrangement step by step. Valence electrons are the outer-shell electrons that help show how atoms bond. For ions, a positive charge means one electron is removed for each plus sign, and a negative charge means one electron is added for each minus sign. The next step is to sketch the skeleton structure. The least electronegative atom usually goes in the center, while hydrogen is almost never central. Fluorine...

Resonance forms in Lewis structures help explain molecules and ions that cannot be shown correctly with just one drawing. In nitrite ion, NO2−, the Lewis structure can be drawn in two ways. The N-O and N=O bonds switch positions in the two drawings, but the atoms stay in the same arrangement. If nitrite really had one single bond and one double bond, the two bond lengths should be different. A double bond is shorter and stronger than a single bond between the same atoms. Experiments show that...

formal charges

Lewis Structures with Formal Charge

Lewis structures can sometimes show more than one reasonable arrangement for a molecule or polyatomic ion. Formal charge helps chemists choose the best Lewis structure when that happens. It is a useful way to compare possible structures in chemistry. Formal charge is the hypothetical charge an atom would have if bonding electrons were shared evenly between the atoms. It can also be found by starting with the valence electrons of the neutral atom, subtracting the nonbonding electrons, and then...

exceptions to the octet rule

Octet Rule Exceptions in Lewis Structures

Some covalent molecules do not follow the octet rule in their Lewis structures. Their central atoms can fall into three groups: odd-electron molecules, electron-deficient molecules, and hypervalent molecules. These cases show why a Lewis structure may not always give every atom eight valence electrons. Odd-electron molecules have an odd number of valence electrons, so one electron remains unpaired. Molecules with an odd number of electrons are called radicals. Nitric oxide, NO, is one example,...

bond energies and bond lengths

How Bond Energy Predicts Reaction Heat

Bond energy helps explain why molecules stay together and how much heat a reaction may release or absorb. A covalent bond is stronger when more energy is needed to separate the atoms. The energy needed to break one specific covalent bond in one mole of gaseous molecules is called bond energy, or bond dissociation energy. For a diatomic molecule, bond energy is the standard enthalpy change for an endothermic reaction that breaks that bond. The H-H bond is a common example. Its bond energy is...

bonding in metals

Electron Sea Model in Metals

Electron sea model explains how metallic bonding holds metals together. In this model, most metal atoms do not have enough valence electrons to form ionic or covalent bonds in the usual way. Their valence electrons are held loosely because metals have low electronegativity, and their ionization energy is low, so electrons are removed easily. When a metal atom loses these outer electrons, it becomes a positively charged metal ion. The freed electrons form a delocalized electron cloud around...

key terms and concepts

Learn how resonance forms explain equal bond lengths in nitrite and carbonate ions, and how a resonance hybrid represents the real electron distribution.

Resonance Forms in Lewis Structures | JoVE K12

chemistry

JoVE Core Chemistry brings general chemistry concepts to life using concise and easy-to-understand animated video lessons. Plus, in the scientist-in-action videos, we demonstrate classical and original research experiments performed in today's laboratories worldwide.

ohios-learning-standards-and-model-curriculum

Ohio’s Learning Standards and Model Curriculum

Physical Science

Study Of Matter

Bonding and compounds

Structure And Properties Of Matter

Chemical bonding

Virginia  Standards of Learning

HIgh School

CH.3

CH.3.d

Physics

PH.9

PH.9.e

new-york-state-science-learning-standards

New York State Science Learning Standards

High School

HS. Structure and Properties of Matter

HS-PS1-3.

HS. Chemical Reactions

HS-PS1-2.

Scientific Laws and Theories

Scientific Laws

In science, a law is defined as a concise, verbal or mathematical, statement that summarizes a vast number of experimental observations. ...

The Scientific Method

Chemistry is an empirical science. Scientists often pose questions to understand the chemistry in everyday life and seek answers to these questions. To ...

Classifying Matter by State

Chemistry is the study of matter and the changes it undergoes. Matter is anything that has mass and occupies space. Matter is all around us; the air, ...

Classifying Matter by Composition

Matter: Pure Substances and Mixtures
According to its composition, the matter can be classified into two broad categories &mdash; pure substances and ...

The Atomic Theory of Matter

The earliest recorded discussion of the basic structure of matter comes from ancient Greek philosophers. Leucippus and Democritus argued that all matter ...

Subatomic Particles

Dalton was only partially correct about the particles that make up matter. All matter is composed of atoms, and atoms are composed of three smaller ...

Elements: Chemical Symbols and Isotopes

A chemical symbol is an abbreviation used to indicate an element or an atom of an element. For example, the symbol for mercury is Hg. The same symbol is ...

Use models to explain how the scientific understanding of atomic structure has evolved.

PS.Chm.1.1

Radioactivity and Nuclear Equations

Nuclear chemistry is the study of reactions that involve changes in nuclear structure. The nucleus of an atom is composed of protons and, except for ...

Types of Radioactivity

The most common types of radioactivity are &#945; decay, &#946; decay, &#947; decay, neutron emission, and electron capture.
Alpha (&#945;) decay is the ...

Nuclear Stability

Protons and neutrons, collectively called nucleons, are packed together tightly in a nucleus. With a radius of about 10&#8722;15 meters, a nucleus is ...

Nuclear Binding Energy

The difference between the calculated and experimentally measured masses is known as the mass defect of the atom. In the case of helium-4, the mass defect ...

Radioactive Decay and Radiometric Dating

Radioactivity is a spontaneous disintegration of an unstable nuclide and is a random process, as all the nuclei in the sample do not decay simultaneously. ...

Nuclear Fission

Many heavier elements with smaller binding energies per nucleon can decompose into more stable elements that have intermediate mass numbers and larger ...

Nuclear Power

Controlled nuclear fission reactions are used to generate electricity. Any nuclear reactor that produces power via the fission of uranium or plutonium by ...

Nuclear Fusion

The process of converting very light nuclei into heavier nuclei is also accompanied by the conversion of mass into large amounts of energy, a process ...

Nuclear Transmutation

Nuclear transmutation is the conversion of one nuclide into another. It can occur by the radioactive decay of a nucleus, or the reaction of a nucleus with ...

Use models to compare nuclear reactions including alpha decay, beta decay and gamma decay; nuclear fusion and nuclear fission.

PS.Chm.1.2

Atomic Orbitals

An atomic orbital represents the three-dimensional regions in an atom where an electron has the highest probability to reside. The radial distribution ...

The Pauli Exclusion Principle

The arrangement of electrons in the orbitals of an atom is called its electron configuration. We describe an electron configuration with a symbol that ...

The Energies of Atomic Orbitals

In an atom, the negatively charged electrons are attracted to the positively charged nucleus. In a multielectron atom, electron-electron repulsions are ...

The Aufbau Principle and Hund's Rule

To determine the electron configuration for any particular atom, we can build the structures in the order of atomic numbers. Beginning with hydrogen, and ...

electron-configuration-of-multielectron-atoms

Electron Configuration of Multielectron Atoms

The alkali metal sodium (atomic number 11) has one more electron than the neon atom. This electron must go into the lowest-energy subshell available, the ...

Use models to explain how electrons are distributed in atoms.

PS.Chm.1.3

Periodic Classification of the Elements

The periodic table arranges atoms based on increasing atomic number so that elements with the same chemical properties recur periodically. When their ...

The Periodic Table

As early chemists discovered more elements, they realized that various elements could be grouped by their similar chemical behaviors. One such grouping ...

Atomic Mass

Atoms &mdash; and the protons, neutrons, and electrons that compose them &mdash; are extremely small. For example, a carbon atom weighs less than 2 ...

Molar Mass

The identity of a substance is defined not only by the types of atoms or ions it contains but by the quantity of each type of atom or ion. For example, ...

Use the Periodic Table as a model to predict the relative properties of elements based on the pattern of valence electrons in the outermost energy levels of atoms.

PS.Chm.2.1

atomic-radii-and-effective-nuclear-charge

Atomic Radii and Effective Nuclear Charge

The elements in groups of the periodic table exhibit similar chemical behavior. This similarity occurs because the members of a group have the same number ...

Ionic Radii

Ionic radius is the measure used to describe the size of an ion. A cation always has fewer electrons and the same number of protons as the parent atom; it ...

Ionization Energy

The amount of energy required to remove the most loosely bound electron from a gaseous atom in its ground state is called its first ionization energy ...

Electron Affinity

The electron affinity (EA) is the energy change for adding an electron to a gaseous atom to form an anion (negative ion).



This process can be either ...

Construct an explanation to infer the atomic size, reactivity, electronegativity, and ionization energy of an element based on its position in the Periodic Table.

PS.Chm.2.2

Types of Chemical Bonds

Chemical bonding theories were pioneered by American chemist Gilbert&nbsp;N. Lewis. He developed a model called the Lewis model to explain the type and ...

Lewis Symbols and the Octet Rule

Chemical bonds are complex interactions between two or more atoms or ions, which reduce the potential energy of the molecule. Gilbert N. Lewis developed a ...

Ionic Bonding and Electron Transfer

Ions are atoms or molecules bearing an electrical charge. A cation (a positive ion) forms when a neutral atom loses one or more electrons from its valence ...

The Born-Haber Cycle

Lattice Energy&nbsp;

An ionic compound is stable because of the electrostatic attraction between its positive and negative ions. The lattice energy of a ...

Trends in Lattice Energy: Ion Size and Charge

An ionic compound is stable because of the electrostatic attraction between its positive and negative ions. The lattice energy of a compound is a measure ...

Covalent Bonding and Lewis Structures

Compared to ionic bonds, which results from the transfer of electrons between metallic and nonmetallic atoms, covalent bonds result from the mutual ...

Electronegativity

Whether a bond is nonpolar or polar covalent is determined by a property of the bonding atoms called electronegativity.&nbsp;

Electronegativity values of ...

Bond Polarity, Dipole Moment, and Percent Ionic Character

Bond Polarity

The absolute value of the difference in electronegativity (&Delta;EN) of two bonded atoms provides a rough measure of the polarity to be ...

Lewis Structures of Molecular Compounds and Polyatomic Ions

To draw Lewis structures for complicated molecules and molecular ions, it is helpful to follow a step-by-step procedure as outlined:


	Determine the ...

Formal Charges

In some cases, there are seemingly more than one valid Lewis structures for molecules and polyatomic ions. The concept of formal charges can be used to ...

Exceptions to the Octet Rule

Many covalent molecules have central atoms that do not have eight electrons in their Lewis structures. These molecules fall into three categories:


	...

Bond Energies and Bond Lengths

Stable molecules exist because covalent bonds hold the atoms together. The strength of a covalent bond is measured by the energy required to break it, ...

Analyze and interpret data to explain the mechanisms and properties of the two main types of intramolecular (ionic and covalent) bonds.

molecular-comparison-of-gases-liquids-and-solids

Molecular Comparison of Gases, Liquids, and Solids

Particles in a solid are tightly packed together (fixed shape) and often arranged in a regular pattern; in a liquid, they are close together with no ...

Intermolecular vs Intramolecular Forces

Intermolecular forces (IMF) are electrostatic attractions arising from charge-charge interactions between molecules. The strength of the intermolecular ...

Intermolecular Forces

Atoms and molecules interact through bonds (or forces): intramolecular and intermolecular. The forces are electrostatic as they arise from interactions ...

comparing-intermolecular-forces-melting-point-boiling-point

Comparing Intermolecular Forces: Melting Point, Boiling Point, and Miscibility

Intermolecular forces are attractive forces that exist between molecules. They dictate several bulk properties, such as melting points, boiling points, ...

surface-tension-capillary-action-and-viscosity

Surface Tension, Capillary Action, and Viscosity

Surface Tension
The various IMFs between identical molecules of a substance are examples of cohesive forces. The molecules within a liquid are surrounded ...

Hydrogen Bonds

Hydrogen BondsHydrogen bonds are weak attractions between atoms that have formed other chemical bonds. One of these atoms is electronegative, like oxygen, ...

Van der Waals Interactions

Atoms and molecules interact with each other through intermolecular forces. These electrostatic forces arise from attractive or repulsive interactions ...

Construct an explanation to summarize the influences intermolecular forces have on the properties of chemical compounds.

PS.Chm.3.2

Analyze the structure of atoms and isotopes.

Resonance Forms in Lewis Structures

Description

Transcript

Tags

More videos by Standards