Name: using ranks to measure correlation
Uploaded: 2025-01-09T15:14:08.000Z
Duration: 1 min 20 s
Channel: JoVE

Spearman&#39;s rank correlation is a nonparametric test used to find the association between two variables in paired data.
Consider an example of finding a correlation between the eggshell thickness and the hatching order for 35 turtle eggs.
Here, the hatching order cannot be measured parametrically. Instead, it can only be ranked based on its order. Similarly, the eggshell thickness can be ranked in increasing order of thickness measured after hatching.
To conduct the test, we begin with the null hypothesis that there is no correlation between the two variables and the alternative hypothesis that a correlation exists between them.
The quantity Rho-sub-S or Spearman&#39;s rank correlation coefficient is a population parameter estimated from the sample statistic R-sub-S using the following equation.
The sample size is more than 30, so the critical value is calculated using the following equation.
Notice the sample statistic is beyond the threshold of the critical value, suggesting that there is a correlation between eggshell thickness and hatching order.

spearman's rank correlation test

Spearman's Rank Correlation Test

Spearman's rank correlation test, also known as Spearman's rho, is a nonparametric method for assessing the strength and direction of association between two variables. This test is particularly valuable when the data distribution is unknown or when the assumption of normality does not hold. Named after the English psychologist and statistician Dr. Charles Edward Spearman, it serves as the nonparametric counterpart to Pearson's correlation coefficient.
Spearman's test calculates correlation by using ranks instead of raw data values, which makes it more flexible and robust than Pearson's. Unlike Pearson's correlation, which only measures linear relationships and assumes normally distributed data, Spearman's correlation can detect both linear and non-linear monotonic associations. It is also suitable for both continuous and discrete ordinal data, making it applicable in a wider range of scenarios where traditional parametric assumptions may not be met.
Spearman's rho ranges from -1 to +1, where the sign indicates the direction of the relationship: a negative sign shows an inverse correlation and a positive sign shows a direct correlation. When ranks are distinct, Spearman's rho is calculated using the formula:
<img alt="Spearman rank correlation formula, equation for statistical correlation analysis, rs calculation method." src="/files/ftp_upload/13646/13646eq1v2.jpg" style="text-align: center; height: 42px;" data-altupdatedat="1761830439000" data-alt="Equation 1" />
Where d is the difference between the ranks for the two variables within a pair, and n is the sample size (total number of sample data pairs). To perform the test, the statistic rs is compared with the critical values at a specific significance level (usually at &#945; = 0.05). These critical values are obtained from the standard table when the sample size is below 30 (i.e., n &#8804; 30).
Spearman's rank correlation test is one of the most widely used correlation methods due to its robustness and versatility. It has an efficiency rating of approximately 0.91 when compared to Pearson's correlation coefficient, assuming all parametric requirements are met. This rating implies that Spearman's rho achieves comparable results to Pearson's correlation; for instance, using Spearman's rho with 100 data pairs can yield results similar to those from Pearson's correlation with 91 pairs. However, this efficiency measure does not mean that Spearman's test is only 91% accurate or correct only 91% of the time. Instead, it reflects the relative effectiveness of Spearman's test in capturing correlation strength compared to its parametric counterpart.

Spearman&#39;s rank correlation is a nonparametric test used to find the association between two variables in paired data.
Consider an example of finding ...

Education

JoVE Core

Statistics

Unit 1

Nonparametric Statistics

KEY TERMS AND CONCEPTS

using ranks to measure correlation

Spearman's rank correlation test measures the link between two variables by using ranks instead of raw values. It is a nonparametric method, so it is useful when the data distribution is unknown or when the normality assumption does not hold. The test is also known as Spearman's rho and is named after Dr. Charles Edward Spearman, an English psychologist and statistician.

This method acts as the nonparametric counterpart to Pearson's correlation coefficient. Pearson's correlation measures only linear relationships and assumes normally distributed data. Spearman's correlation is more flexible because it can detect both linear and non-linear monotonic associations. A monotonic association is a relationship that moves in one direction, even if it does not form a straight line.

Spearman's rho can be used with both continuous data and discrete ordinal data. That makes it useful in a wider range of cases where parametric assumptions may not be met. The correlation value ranges from -1 to +1. A negative value shows an inverse relationship, while a positive value shows a direct relationship.

When all ranks are distinct, Spearman's rho is calculated from the difference between the ranks in each pair of values and the sample size. The statistic rs is then compared with critical values at a chosen significance level, usually α = 0.05. For sample sizes below 30, or n ≤ 30, the critical values are taken from a standard table.

Spearman's rank correlation test is widely used because it is robust and versatile. Its efficiency rating is about 0.91 compared with Pearson's correlation coefficient when the parametric requirements are met. This means Spearman's rho can give results similar to Pearson's correlation, such as using 100 data pairs to match the effect of about 91 pairs with Pearson's method. It does not mean the test is only 91% accurate; it shows how effectively it captures correlation strength compared with Pearson's test.

Using Ranks to Measure Correlation

introduction to nonparametric statistics

Nonparametric Tests for Unusual Data

Nonparametric statistics are useful when data do not fit the usual assumptions for parametric tests. Parametric tests depend on a known population distribution and specific values such as the mean and standard deviation. Nonparametric tests do not require those conditions, so they are often used with small samples, skewed data, or ordinal and categorical variables. These methods are flexible because they work with data that do not meet requirements like normal distribution or equal variance.

ranks

Rank Ordering in Nonparametric Statistics

Rank ordering is a nonparametric statistics method that arranges data by a chosen criterion. It is useful for nominal and ordinal data, where values are grouped or ordered rather than measured on a scale. Because it needs fewer assumptions about the population, it is often easier to apply and interpret than parametric methods. To rank data, items are sorted first and then assigned a position. A set of weather days can be ordered from hottest to coldest, and cities can be arranged from smallest...

introduction to the sign test

Using the Sign Test for Paired Data

The sign test is a nonparametric statistics method for paired data, nominal data, and claims about a population median. It uses only the direction of change, so it does not rely on assumptions about the data distribution. That makes it useful when data do not fit the normal distribution requirements of many parametric tests. Researchers can use the sign test to compare two related measurements, such as pre- and post-treatment results in a medical study. In that example, a positive sign can...

sign test for matched pairs

Matched Pair Changes: The Sign Test

The sign test for matched pairs compares two related samples. It is often used to check the effect of an intervention on one of the pairs. This method is useful when the data distribution is unknown. It is also helpful for small sample sizes. The test usually looks at pre- and post-treatment measurements from the same subjects. It asks whether the median values of the two related samples are different. To do this, the differences between each pair of observations are calculated first. The test...

sign test for nominal data

Testing Preferences with the Sign Test

The sign test is a nonparametric method for testing a single sample median or comparing the medians of two related samples. It is useful when the data are nominal, which means the values are categories such as names, labels, or preferences. Because nominal data do not have a natural order, analysis focuses on population proportions instead of mean or median values from continuous data. A simple example is a survey about pet preference. If some people choose dogs and others choose cats, the...

sign test for median of single population

sign-test-for-median-of-single-population

Single-Population Sign Test for a Median

The single-population sign test checks whether one sample median matches a chosen value. It is a nonparametric method, so it is useful when the data do not follow a known distribution. It is also helpful for small samples or when the usual assumptions for parametric tests are not met. The test starts with a null hypothesis that the population median equals a specific number. The alternative hypothesis can state that the median is different from, less than, or greater than that number. The...

wilcoxon signed-ranks test for matched pairs

wilcoxon-signed-ranks-test-for-matched-pairs

Testing Paired Data with Wilcoxon Signs

The Wilcoxon signed-rank test checks paired data by using both the size and the direction of the differences. It is a nonparametric test, which means it does not require the data to follow a normal distribution. It tests whether the median of the differences in a population of matched pairs is zero. This test works best when the data come in matched pairs, such as two measurements from the same subject or linked observations. The differences between each pair should also have an approximately...

wilcoxon signed-ranks test for median of single population

wilcoxon-signed-ranks-test-for-median-of-single-population

Wilcoxon Signed-Rank Test Using Ranked Differences

The Wilcoxon signed-rank test uses ranked differences to check whether a single population median matches a chosen value. It is a nonparametric test, so it does not require the data to follow a normal distribution. That makes it useful for small samples and for data that are not normal. The test starts by finding the difference, d, between each observation and the hypothesized median. The absolute values of those differences are then ranked from smallest to largest, and ties get the average...

wilcoxon rank-sum test

Comparing Two Groups with Rank Sums

The Wilcoxon rank-sum test compares two independent groups by using ranks instead of raw numbers. It is also called the Mann-Whitney U test. This nonparametric test helps show whether the two groups come from different distributions. The test is meant for two independent populations. The samples should be randomly drawn. The data must be ordinal, or it must be possible to put the data in order and rank it. The null hypothesis says the medians of the two populations are the same. The...

bootstrapping

Bootstrapping in Small Sample Statistics

Bootstrapping is a statistical resampling method used to estimate population parameters from an existing sample. It builds on the idea of the word bootstrap, which first appeared in the 19th century as a metaphor for doing something independently. In statistics, the method was developed by Dr. Bradley Efron in 1979. Bootstrapping is also called bootstrap resampling. It works by drawing many random samples, with replacement, from the original dataset. Each bootstrap sample has the same size as...

the anderson-darling test

Anderson-Darling Test for Goodness of Fit

The Anderson-Darling test checks whether a data sample fits a specific theoretical distribution. It compares the sample’s empirical cumulative distribution function, or ECDF, with the cumulative distribution function, or CDF, of the distribution being tested. This makes it a useful goodness-of-fit method when the population distribution is uncertain. Unlike parametric tests, the Anderson-Darling test does not require assumptions about specific distribution parameters. Its critical values...

Spearman's rank correlation test measures the link between two variables by using ranks instead of raw values. It is a nonparametric method, so it is useful when the data distribution is unknown or when the normality assumption does not hold. The test is also known as Spearman's rho and is named after Dr. Charles Edward Spearman, an English psychologist and statistician. This method acts as the nonparametric counterpart to Pearson's correlation coefficient. Pearson's correlation measures only...

kendall's tau test

Kendall Tau for Rank Correlation

Kendall's tau is a rank correlation test for checking whether two variables are related. It is also called the Kendall rank coefficient test. Because it is nonparametric, it can be used when the sample and population distributions are unknown. The test was developed in 1938 by British statistician Sir Maurice George Kendall. Its tau coefficient, written as τ, ranges from -1 to +1. A value of +1 means the two rankings are perfectly similar and show a strong positive correlation. A value of -1...

kruskal-wallis test

Kruskal-Wallis Test for Group Comparison

The Kruskal-Wallis test compares three or more independent groups when the data is not suited to a one-way ANOVA. It is a nonparametric test, which means it does not rely on the normal distribution needed for parametric methods. It is often used with one ordinal dependent variable, so it works well for ranked or ordered data. This test is useful when group data does not meet the assumption of equal variances or when the data shape is not normal. Instead of comparing means, the Kruskal-Wallis...

wald-wolfowitz runs test i

Runs Test for Randomness in Sequences

The Wald-Wolfowitz runs test checks whether the order of values in a sequence is random. It is also called the runs test. This nonparametric statistical test is used for ordered data, even when the population and sample distributions are not known. The method focuses on runs. A run is a continuous stretch of the same symbol, such as a series of positive values or a series of negative values. It can also be used with binary data, such as successes and failures, or with other two-category...

wald-wolfowitz runs test ii

Runs Test for Randomness in Ordered Data

The Wald-Wolfowitz runs test checks whether ordered data is random or shows a pattern. A run is a consecutive sequence of similar items. If the number of runs is much higher or lower than expected, the data is considered non-random and may contain a detectable structure. The test works with binary data such as + and −, or 1s and 0s. For data with two categories, the categories are first converted into binary choices. DNA sequences can be tested directly because categories like A, T, G, and C...

behrens&#8211;fisher test

Unequal-Variance Mean Comparison Test

The Behrens-Fisher test compares the means of two normally distributed populations when their variances are not equal. It is used when the usual Student’s t-test is not a good fit because that test assumes equal variances. This makes the Behrens-Fisher test useful for two independent samples that follow normality but do not share variance homogeneity. The method is especially helpful with small sample sizes. In that setting, unequal variances can affect how reliable the results are. The test...

fisher&#39;s exact test

Fisher's Exact Test for Small Tables

Fisher's exact test is a statistical significance test for 2x2 contingency tables. It is often used when sample sizes are small and the data are categorical. The test helps scientists check whether two variables may be related. Unlike the chi-squared test, Fisher's exact test does not estimate the P-value. It calculates the exact probability of seeing the observed data, or more extreme results, if the null hypothesis is true. That makes it useful when the chi-squared test assumptions are not...

friedman two-way analysis of variance by ranks

friedman-two-way-analysis-of-variance-by-ranks

Friedman Rank Test for Repeated Measures

Friedman’s Rank Test for Repeated Measures compares related data across several conditions when the usual ANOVA rules do not fit. It is a nonparametric test, so it works well with ordinal data or data that are not normally distributed. It is also useful for matched subjects over time or for repeated measures from the same group. The null hypothesis, H0, says that there is no difference in the distributions of the variables being compared. If H0 is rejected, the results show significant...

cochran's q test

Cochran's Q Test for Repeated Binary Data

Cochran's Q Test compares three or more related groups when the result is binary, meaning a yes/no or 0/1 outcome. It is a nonparametric statistical test, so it does not rely on a normal data pattern. Researchers use it to see whether the proportions differ across multiple conditions or time points for the same subjects. The test is an extension of the McNemar Test. McNemar's Test works with only two related samples, while Cochran's Q Test can handle three or more related samples. The test...

mcnemar's test

McNemar's Test for Paired Proportions

McNemar's Test compares paired proportions when the outcome has only two choices, such as yes/no, success/failure, or presence/absence. It is a nonparametric statistical test, so it is useful when the data come from related groups rather than independent groups. The test is often used with pre-test and post-test data, where the same subjects are measured under two conditions. The test is named after the statistician Quinn McNemar, who introduced it in 1947. It is commonly used in matched-pair...

kendall's coefficient of concordance

Ranking Agreement with Kendall's W

Kendall's Coefficient of Concordance, or Kendall's W, measures how much multiple raters agree when they rank the same set of items. It is a non-parametric statistic, so it works well with ordinal data, which are data written as ranks rather than exact measurements. This measure is useful when several judges or evaluators need to show whether their rankings are consistent. It is often used in research areas such as psychology, medicine, and social sciences. In those settings, people may be...

key terms and concepts

Learn how Spearman's rho uses ranks to measure the strength and direction of a relationship when data are ordinal, non-normal, or not linear.

Using Ranks to Measure Correlation | JoVE K12

statistics

JoVE Core Statistics introduces the concepts and application of the collection, analysis, presentation, and interpretation of data to students. These animated lessons provide an understanding of statistics beneficial to students from a wide range of disciplines. Additionally, the scientist-in-action videos demonstrate the application of related concepts in classical and original research experiments performed in today's laboratories worldwide

Using Ranks to Measure Correlation

Description

Transcript

Tags