Name: rlc circuit state equations
Uploaded: 2024-09-26T13:17:19.000Z
Duration: 1 min 27 s
Channel: JoVE

The frequency-domain technique, which is commonly used for analyzing and designing feedback control systems, is only suitable for linear, time-invariant systems.
The time-domain or state-space approach can handle nonlinear, time-varying, and multiple-input, multiple-output systems.
In the state-space representation, a particular subset of system variables, identified as state variables, is used to construct simultaneous, first-order differential equations for an nth-order system, labeled as state equations.
Consider an RLC circuit. Given that the network is second-order, it&#39;s necessary to employ two simultaneous first-order differential equations.
The quantities that are differentiated in the derivative equation for the energy-storage elements - the inductor and the capacitor are the state variables.
Kirchhoff&#39;s voltage and current laws are used to express the non-state variables as linear combinations of the state variables and the input.
These results are substituted into the original derivative equations to obtain the state equations.
The output equation is the current through the resistor.
The final step involves representing these equations in a vector-matrix form to acquire the state-space representation of the given electrical network.

state space representation

The frequency-domain technique, commonly used in analyzing and designing feedback control systems, is effective for linear, time-invariant systems. However, it falls short when dealing with nonlinear, time-varying, and multiple-input multiple-output systems. The time-domain or state-space approach addresses these limitations by utilizing state variables to construct simultaneous, first-order differential equations, known as state equations, for an nth-order system.
Consider an RLC circuit, a common second-order system. To analyze this circuit using the state-space approach, two simultaneous first-order differential equations are necessary. The state variables in this context are derived from the quantities differentiated in the derivative equations associated with the energy-storage elements, specifically the inductor and capacitor.
Kirchhoff's voltage and current laws are employed to formulate the state equations. Kirchhoff's voltage law (KVL) states that all electrical potential differences around a loop is zero, while Kirchhoff's current law (KCL) asserts that the sum of currents entering a junction equals the sum of currents leaving. These laws enable the expression of non-state variables as linear combinations of state variables and inputs.
In an RLC circuit, the state variables are the voltage across the capacitor VC and the current through the inductor iL. Kirchhoff's laws express the resistor current and other non-state variables in terms of VC and iL. These expressions are then substituted back into the circuit's original differential equations.
After deriving the state equations, the final step is to represent these equations in vector-matrix form, achieving the state-space representation. For an RLC circuit, this might involve defining the state vector x, the input vector u, the output vector y, and matrices A, B, C, and D such that:
<img alt="Dynamic system equation, format: &#7819; = Ax + Bu, mathematical formula, control theory concept." src="/files/ftp_upload/16100/16100_PT%20EQUATION_1.svg" style="text-align: center; height: 16px;" data-altupdatedat="1762173717000" data-alt="Equation1" />
<img alt="Linear equation, y=Cx+Du, representing a mathematical formula or expression." src="/files/ftp_upload/16100/16100_PT%20EQUATION_2.svg" style="text-align: center; height: 16px;" data-altupdatedat="1762173717000" data-alt="Equation2" />
This representation is essential for analyzing the dynamic behavior of the system and designing appropriate control strategies.
In summary, the state-space approach provides a robust framework for handling complex systems, extending beyond the capabilities of frequency-domain techniques by accommodating nonlinearities, time variations, and multiple inputs and outputs.

State Space Representation

The frequency-domain technique, which is commonly used for analyzing and designing feedback control systems, is only suitable for linear, time-invariant ...

Education

JoVE Core

Electrical Engineering

Unit 1

Modeling in Time and Frequency Domain

KEY TERMS AND CONCEPTS

rlc circuit state equations

RLC circuit state equations show how a circuit changes over time using state variables. This time-domain method is useful for linear, time-invariant systems, but it also helps when frequency-domain analysis is not enough. It is especially useful for nonlinear systems, time-varying systems, and multiple-input multiple-output systems.

The state-space approach turns an nth-order system into a set of simultaneous first-order differential equations called state equations. For a common second-order system like an RLC circuit, two first-order equations are needed. The state variables come from the quantities tied to the circuit’s energy-storage elements, which are the inductor and the capacitor.

Kirchhoff’s voltage law, or KVL, says that the total potential difference around a loop is zero. Kirchhoff’s current law, or KCL, says that the current entering a junction equals the current leaving it. These rules let engineers write non-state variables as linear combinations of the state variables and the input.

In an RLC circuit, the state variables are the capacitor voltage, VC, and the inductor current, iL. KVL and KCL are used to express the resistor current and other non-state variables in terms of VC and iL. Those expressions are then substituted into the circuit’s original differential equations.

After the state equations are found, they are written in vector-matrix form. This gives the state-space representation, with a state vector x, an input vector u, an output vector y, and matrices A, B, C, and D. This form is useful for studying system behavior and for designing control strategies.

RLC Circuit State Equations

transfer function in control systems

Transfer Function from Input to Output

The transfer function describes how a linear time-invariant, or LTI, system maps an input to an output in the frequency domain. It gives a compact way to study system behavior without working only in the time domain. It also connects the differential equations of the system to a form that is easier to handle mathematically. For an nth-order LTI system, the behavior is written as a differential equation with constant coefficients. In that equation, r(t) is the input and c(t) is the output. The...

electrical systems

RLC Circuit Transfer Functions

RLC circuits use resistors, capacitors, and inductors to show how electrical signals change over time. In circuit analysis, these passive linear components are arranged so the link between an input and an output can be described with a transfer function. For this topic, the output is the voltage across the capacitor, compared with the input voltage. A series RLC circuit can be analyzed with Kirchhoff's Voltage Law, or KVL. KVL says that the sum of all voltages around a closed loop is zero.

mechanical systems

Transfer Functions in Mechanical Motion

Mechanical motion can be modeled with springs, masses, and viscous dampers. In these models, springs behave like inductors and masses act like capacitors in an electrical network. A viscous damper works like a resistor because it removes energy from the system. A force acts on the mass in the direction of motion. It is balanced by the spring force, the damping force, and the force from the mass’s acceleration. Newton’s second law is used to describe this balance, and the sum of the forces on...

electro-mechanical systems

DC Motor Modeling in Electromechanical Systems

DC motor modeling is a key part of electromechanical systems. These systems combine electrical parts and mechanical parts to produce a useful output. A DC motor is one common example because it turns electrical energy into mechanical motion. It is used in many places, from simple fans to complex robotic mechanisms. Inside the DC motor, the armature is a rotating circuit placed in a magnetic field. When current flows through the armature, it experiences a force from the magnetic field. That...

linear approximation in frequency domain

Linearizing Nonlinear RL Circuits

Linearizing nonlinear RL circuits helps turn a hard circuit problem into a simpler linear one. Linear systems follow superposition, which means the total response equals the sum of the responses to separate inputs. They also follow homogeneity, which means scaling the input scales the output by the same amount. Nonlinear systems do not automatically have those properties. For small changes around an operating point, though, a nonlinear system can often be treated as linear. This is done with a...

RLC circuit state equations show how a circuit changes over time using state variables. This time-domain method is useful for linear, time-invariant systems, but it also helps when frequency-domain analysis is not enough. It is especially useful for nonlinear systems, time-varying systems, and multiple-input multiple-output systems. The state-space approach turns an nth-order system into a set of simultaneous first-order differential equations called state equations. For a common second-order...

transfer function to state space

Phase-Variable State Equations from Transfer Functions

Phase-variable state equations show how a transfer function can be rewritten for computer simulation. In state-space form, the system is described with state variables, which are the output and its first several derivatives. This makes it easier to model a physical system on a digital computer. The starting point is an nth-order linear differential equation with constant coefficients. Systems like an RLC circuit can be written this way. To build the state equations, the transfer function is...

state space to transfer function

Finding a Transfer Function from State Space

Finding a transfer function from state-space form is a key step in system analysis. It changes a time-domain model into a frequency-domain form. That makes it easier to study and design control systems. The process starts with the state-space equations. These include the state equation and the output equation. In these equations, x(t) is the state vector, u(t) is the input vector, y(t) is the output vector, and A, B, C, and D are the matrices that define the system dynamics. Next, the Laplace...

linear approximation in time domain

Linearizing Nonlinear State-Space Models

Linearizing nonlinear state-space models helps describe systems that change with time or operating conditions. State-space representation is often effective for this kind of modeling. It is especially useful for systems such as a simple pendulum or a translational mechanical system with nonlinear springs. A simple pendulum can be modeled by summing torques around the pivot point. In this case, the mass is evenly distributed along the pendulum, and the center of mass is located at half its...

key terms and concepts

Learn how an RLC circuit is written as state equations and converted into state-space form using KVL, KCL, and the key state variables VC and iL.

RLC Circuit State Equations | JoVE K12

JoVE Core Electrical Engineering offers easy-to-understand animated videos that cover fundamental concepts of electric circuits along with circuit analysis techniques. It incorporates first-order and second-order circuits using operational amplifiers and circuit transformation concepts. The inclusion of practical design examples and real-world applications through scientist-in-action videos adds significant educational value, making complex concepts accessible.

electrical engineering

RLC Circuit State Equations

Description

Transcript

Tags