Name: lossless lines and voltage behavior
Uploaded: 2024-11-21T14:54:26.000Z
Duration: 1 min 23 s
Channel: JoVE

Consider a lossless line with a purely imaginary propagation constant, resistive characteristic impedance, and established ABCD parameters.
Its equivalent pi circuit has imaginary series impedance and shunt admittance. When the beta and length product is less than pi, it exhibits inductive series impedance and capacitive shunt admittance, making it lossless.
The wavelength, or distance required to change the voltage or current phase by 2-pi, is calculated using the velocity of propagation.
Surge impedance loading is the power delivered to a load resistance equal to the surge impedance.
Here, voltage remains constant along the line, and constant real power flows from the sending to the receiving end, with zero reactive power flow.
Real power delivered is determined using the rated voltage and surge impedance.
In reality, power lines are not terminated by their surge impedance, causing non-flat voltage profiles that vary depending on load conditions.
At no load, voltage increases from the sending to the receiving end, while for short circuits, it decreases to zero at the receiving end. The full-load profile is higher than the short-circuit profile.

lossless lines

In electrical engineering, a lossless transmission line is characterized by a purely imaginary propagation constant and a resistive characteristic impedance. The ABCD parameters, which describe the relationship between the input and output voltages and currents, indicate an equivalent &#960; circuit with an imaginary series impedance and a shunt admittance. This results in a transmission line that, when the product of the phase constant (beta) and the length of the line is less than pi, exhibits inductive series impedance and capacitive shunt admittance, ensuring that it remains lossless.
Wavelength and Propagation
The wavelength is the physical length over which the voltage or current phase changes by 2&#960;. This is determined using the signal's propagation velocity. For a lossless line, the wavelength is crucial in determining the electrical length of the line and its phase characteristics.
Surge Impedance Loading
Surge impedance loading (SIL) is a concept used to describe the power that can be delivered to a load resistance equal to the surge impedance of the transmission line. For a transmission line with a resistive characteristic impedance, the SIL is calculated using the rated voltage and the surge impedance:
<img alt="Static equilibrium formula SIL=V&#178;rated/Zc, electrical engineering equation." src="/files/ftp_upload/16147/16147_Equation%201.svg" style="height: 36px;" data-altupdatedat="1762173717000" data-alt="Equation1" />
In this condition, the voltage remains constant along the line, and there is a constant flow of real power from the sending end to the receiving end, with zero reactive power flow.
Voltage Profiles and Loading Conditions
In practical scenarios, transmission lines are rarely terminated with their surge impedance, leading to non-uniform voltage profiles along the line. Under no-load conditions, the voltage increases from the sending end to the receiving end due to the Ferranti effect. Conversely, in a short-circuit condition, the voltage drops to zero at the receiving end. At full load, the voltage profile lies between these two extremes, generally higher than the short-circuit profile but lower than the no-load profile.
These characteristics of lossless transmission lines are vital for the design and analysis of power systems, ensuring efficient and reliable power delivery with minimal losses and stable voltage profiles under varying load conditions.

Lossless Lines

Consider a lossless line with a purely imaginary propagation constant, resistive characteristic impedance, and established ABCD parameters.
Its equivalent ...

Education

JoVE Core

Electrical Engineering

Unit 1

Steady-State Transmission Lines and Power Flows

steady-state-transmission-lines-and-power-flows

KEY TERMS AND CONCEPTS

lossless lines and voltage behavior

Lossless transmission lines in electrical engineering are described by a purely imaginary propagation constant and a resistive characteristic impedance. Their ABCD parameters show an equivalent pi circuit with an imaginary series impedance and a shunt admittance. When the product of beta and line length is less than pi, the line has inductive series impedance and capacitive shunt admittance, which keeps it lossless.

Wavelength is the physical length over which voltage or current phase changes by 2π. It depends on the signal’s propagation velocity. For a lossless line, wavelength helps define the electrical length of the line and its phase behavior.

Surge impedance loading, or SIL, is the power that can be sent to a load resistance equal to the line’s surge impedance. For a line with resistive characteristic impedance, SIL is found from the rated voltage and the surge impedance. In this condition, voltage stays constant along the line, and real power flows from the sending end to the receiving end with zero reactive power flow.

In practice, transmission lines are often not terminated with their surge impedance, so the voltage profile is not uniform. Under no-load conditions, the voltage rises from the sending end to the receiving end because of the Ferranti effect. Under short-circuit conditions, the receiving-end voltage drops to zero. At full load, the voltage profile falls between these two cases, and these line properties are important for efficient and reliable power-system design.

Lossless Lines and Voltage Behavior

transmission-line differential equations

Modeling Voltage and Current on Transmission Lines

Transmission lines carry electric power, and their resistance, inductance, and capacitance are spread out along the line. Because these properties are distributed per unit length, voltage and current change as they move from one end of the line to the other. Differential equations are used to describe that variation. A line-section model helps show how this works. In the model, a small length, Δx, is used to represent the line. Voltage V(x) and current i(x) are measured from the receiving end.

Lossless transmission lines in electrical engineering are described by a purely imaginary propagation constant and a resistive characteristic impedance. Their ABCD parameters show an equivalent pi circuit with an imaginary series impedance and a shunt admittance. When the product of beta and line length is less than pi, the line has inductive series impedance and capacitive shunt admittance, which keeps it lossless. Wavelength is the physical length over which voltage or current phase changes...

maximum power flow and line loadability

Transmission Line Power Limits and Loadability

Transmission line power limits and loadability depend on voltage, angle, and line impedance. For lossy transmission lines, ABCD parameters in phasor form are used to relate sending-end and receiving-end voltages and currents. This matrix relation makes it possible to find the receiving-end current and then calculate the complex power delivered to the load. From the complex power, the real and reactive power components can be determined. For a lossless line, the equations become simpler, and...

the power flow problem and solution

Power Flow Analysis in Electric Networks

Power flow analysis helps determine how real and reactive power move through an electric network. It uses the system’s single-line diagram, which shows the buses, transmission lines, transformers, and loads. The analysis focuses on balanced three-phase steady-state operation. Each bus in the system has four key variables: voltage magnitude V k, phase angle δ k, real power P k, and reactive power Q k. Two of these four variables are treated as inputs. The power flow program solves for the...

control of power flow

Voltage and Reactive Power Control

Voltage and reactive power control help keep a power system stable and efficient. In this topic, generator settings, switched equipment, and transformer taps work together to guide how power moves through the network. A generator can be modeled with a Thevenin equivalent circuit under balanced steady-state conditions. The main terms are terminal voltage Vt, excitation voltage Eg, power angle δ, and positive-sequence synchronous reactance Xg. From this model, the generator current and the...

fast decoupled and dc powerflow

Power Flow Shortcuts for Grid Contingencies

Fast decoupled power flow and DC power flow give engineers faster ways to study a power system during contingencies such as generator outages or transmission line failures. These methods help operators get quick power flow solutions, which is important for real-time system adjustments. Fast decoupled power flow simplifies the Jacobian matrix, the set of equations used in power flow calculations, by neglecting some elements. The method drops J2 and J3 and assumes voltage magnitudes stay close...

key terms and concepts

Explore lossless transmission lines, wavelength, surge impedance loading, and how voltage profiles change under no-load, full-load, and short-circuit conditions.

Lossless Lines and Voltage Behavior | JoVE K12

JoVE Core Electrical Engineering offers easy-to-understand animated videos that cover fundamental concepts of electric circuits along with circuit analysis techniques. It incorporates first-order and second-order circuits using operational amplifiers and circuit transformation concepts. The inclusion of practical design examples and real-world applications through scientist-in-action videos adds significant educational value, making complex concepts accessible.

electrical engineering

Lossless Lines and Voltage Behavior

Description

Transcript

Tags