Name: pressure and velocity in inviscid flow
Uploaded: 2025-02-13T15:43:25.000Z
Duration: 1 min 28 s
Channel: JoVE

In a moving fluid, shear stresses develop due to viscosity. For water, which has low viscosity, these effects are negligible, simplifying fluid motion analysis.
When shear stresses are negligible, the fluid is considered inviscid, or frictionless. In inviscid fluids, normal stress is the same in all directions, meaning pressure is independent of stress direction.
Pressure is the negative of normal stress, ensuring compressive stresses result in a positive pressure value.
The general equations of motion for inviscid flow, known as Euler&#39;s equations, describe momentum conservation. These equations represent Newton&#39;s second law applied to a fluid element, relating velocity changes to the forces acting on the fluid.
Euler&#39;s equations account for pressure gradients, body forces like gravity, and accelerations&#8212;both local and convective&#8212;that drive changes in fluid velocity.
They neglect viscous forces, simplifying the analysis, but remain challenging to solve due to nonlinear velocity terms in the partial differential equations.
Integrating Euler&#39;s equations along a streamline derives Bernoulli&#39;s equation, providing insights into pressure, velocity, and elevation variations in inviscid flows, making it a key tool in fluid mechanics.

euler&#39;s equations of motion

Euler&#39;s Equations of Motion

In fluid mechanics, shear stresses arise from viscosity, which represents a fluid's internal resistance to deformation. For low-viscosity fluids, like water, these stresses are minimal, simplifying flow analysis by allowing the fluid to be treated as inviscid, or frictionless. In an inviscid fluid, shear stresses are absent, leaving only normal stresses, which act perpendicularly to fluid elements. Notably, pressure &#8212; defined as the negative of the normal stress &#8212; remains uniform across different directions and is unaffected by the orientation of stress.
The motion of inviscid fluids is governed by Euler's equations, derived from Newton's second law as applied to fluid dynamics. These equations describe momentum conservation by relating the rate of change in velocity to the forces acting on a fluid element. For an inviscid fluid, the relevant forces include pressure gradients and body forces, such as gravity. Euler's equations express the balance of these forces, excluding viscous terms, as:
<img alt="Fluid dynamics equation, Navier-Stokes, vector calculus, partial derivatives, mathematical formula." src="/files/ftp_upload/18057/18057_Equation_1.svg" style="text-align: center; height: 30px;" data-altupdatedat="1762173717000" data-alt="Equation 1" />
where &#961; is the fluid density, v is the velocity vector, p is the pressure, and g represents gravitational acceleration.
While Euler's equations ignore viscosity, they remain complex due to their nonlinear terms, which account for the convective acceleration of fluid particles. When integrated along a streamline, these equations yield Bernoulli's equation, which describes a fundamental relationship in fluid mechanics, linking pressure, velocity, and elevation for inviscid flows. Bernoulli's equation is a powerful tool for analyzing energy distribution within fluid flows, supporting applications in fluid transport, aerodynamics, and hydrodynamics.

In a moving fluid, shear stresses develop due to viscosity. For water, which has low viscosity, these effects are negligible, simplifying fluid motion ...

Education

JoVE Core

Civil Engineering

Unit 1

Differential Analysis of Fluid Flow

KEY TERMS AND CONCEPTS

pressure and velocity in inviscid flow

Pressure and velocity in inviscid flow are linked by Euler's equations of motion. In fluid mechanics, viscosity creates shear stress, which is a force that acts along a surface. For low-viscosity fluids like water, these shear stresses are very small. That lets the fluid be treated as inviscid, or frictionless.

In an inviscid fluid, shear stresses are absent. Only normal stresses remain, and these act perpendicular to a fluid element. Pressure is the negative of the normal stress. It stays the same in different directions and does not depend on how the stress is oriented.

Euler's equations come from Newton's second law applied to fluid motion. They describe momentum conservation by linking the change in velocity to the forces on a fluid element. For inviscid flow, those forces are pressure gradients and body forces such as gravity. The equations include density, velocity, pressure, and gravitational acceleration, but they leave out viscous terms.

Even without viscosity, Euler's equations are still nonlinear. That means they are complex because they include convective acceleration, which follows the motion of fluid particles. When the equations are integrated along a streamline, they lead to Bernoulli's equation. Bernoulli's equation connects pressure, velocity, and elevation in inviscid flows and is useful for fluid transport, aerodynamics, and hydrodynamics.

Pressure and Velocity in Inviscid Flow

Pressure and velocity in inviscid flow are linked by Euler's equations of motion. In fluid mechanics, viscosity creates shear stress, which is a force that acts along a surface. For low-viscosity fluids like water, these shear stresses are very small. That lets the fluid be treated as inviscid, or frictionless. In an inviscid fluid, shear stresses are absent. Only normal stresses remain, and these act perpendicular to a fluid element. Pressure is the negative of the normal stress. It stays the...

stream function

Stream Function for Incompressible Flow

The stream function helps describe two-dimensional incompressible flow. In this type of flow, the continuity equation keeps mass conserved. That means fluid entering a region must be balanced by fluid leaving it. For incompressible flow, the density stays constant. The continuity requirement then becomes a zero-divergence condition for the velocity field. In two dimensions, the horizontal and vertical velocity components are usually written as u and v. A stream function, written as ψ, is used...

irrotational flow

Irrotational Flow Near Boundaries

Irrotational flow is fluid motion in which particles do not spin around their own axes. It has zero vorticity, which means the curl of the velocity field is zero. That condition places limits on the velocity gradients in the flow. A simple example is uniform flow. In this case, the velocity u stays constant, while v and w are both zero. This satisfies the irrotational conditions and gives a basic model of non-rotating flow. When a solid object is added, irrotational flow usually remains only...

velocity potential

Velocity Potential in Pipe Flow

Velocity potential in pipe flow describes the motion of fluid in the central region of a long, straight pipe with a uniform cross-section. In this region, the flow is steady, incompressible, and irrotational. Irrotational means the fluid particles do not spin around their own axes. A scalar function called the velocity potential, written as φ, is used to describe this motion. The velocity field V is defined as the gradient of φ. Because the curl of a gradient is always zero, this form of V...

plane potential flows

Plane Potential Flow Patterns and Models

Plane potential flows describe fluid motion using simple flow patterns and models. They assume the fluid is irrotational and incompressible. These assumptions let the flow be written with a velocity potential function, φ, which gives the flow speed in a direction, and a stream function, ψ, which shows the flow path. Both are governed by Laplace's equation and are useful for estimating flow patterns, velocity distributions, and pressure fields around hydraulic structures. Uniform flow is the...

navier&#8211;stokes equations

Fluid Stress and Flow Equations

Fluid stress and flow equations describe how incompressible Newtonian fluids move under pressure, shear, and gravity. In these fluids, density stays constant, and stress changes linearly with the rate of deformation. The main stress types are normal stress and shear stress. Normal stress depends on pressure acting on the fluid and on deformation rate in specific directions. Shear stress acts along the surface of a fluid layer. It shows how neighboring layers slide past one another, so velocity...

steady, laminar flow between parallel plates

steady-laminar-flow-between-parallel-plates

Laminar Flow Profile Between Parallel Plates

Laminar flow between parallel plates shows how fluid moves through a narrow, flat channel. This model helps describe flow in water conveyance and drainage systems, where the space is limited and the motion stays orderly. It is also useful for analyzing flow in rectangular channels used in many engineering settings. The flow is studied with the Navier-Stokes equations, which govern fluid motion. These equations are often difficult to solve because they are nonlinear. In this case, the problem...

couette flow

Linear Shear Between Moving Plates

Linear shear between moving plates describes fluid motion in a simple channel with two parallel plates. One plate stays fixed, and the other moves at a constant speed. This setup helps show how viscosity and incompressible flow shape fluid motion under the Navier-Stokes equations. The model uses a steady, laminar, incompressible flow with no pressure gradient in the flow direction. The x-axis points along the moving direction of the upper plate, and the y-axis is perpendicular to both plates.

steady, laminar flow in circular tubes

Parabolic Flow in Circular Tubes

Parabolic flow in circular tubes describes the steady, incompressible motion of a viscous fluid through a tube with a constant radius. This Hagen-Poiseuille flow is a classic example of laminar flow. It is often used to study fluid transport in narrow channels, including capillaries. Cylindrical coordinates are used to describe the tube. The radial direction is r, the angular direction is θ, and the axial direction is z. In this flow, the velocity is purely axial. That means the fluid moves...

design example: flow of oil through circular pipes

design-example-flow-of-oil-through-circular-pipes

Pressure Drop in Oil Pipe Design

Pressure drop in oil pipe design depends on pipe size, oil properties, and the flow rate needed through a circular pipe. For steady, incompressible, laminar flow, Hagen-Poiseuille's law gives an exact solution from the Navier-Stokes equations. It is used to find the pressure difference needed to keep oil moving through a pipeline section. The pressure drop equation uses the oil's dynamic viscosity, the pipeline length, the desired volumetric flow rate, and the pipe's inner radius. This...

key terms and concepts

Learn how pressure, velocity, and gravity shape inviscid fluid motion through Euler's equations, and how they lead to Bernoulli's equation along a streamline.

Pressure and Velocity in Inviscid Flow | JoVE K12

JoVE Core Civil Engineering offers a foundational exploration of essential construction materials such as bricks, stones, steel, wood, and concrete, along with fluid mechanics topics like flow over immersed bodies, open channel flow, and dimensional modeling. It also covers key surveying concepts, including leveling, traverse adjustments, curve design, topographic mapping, and geospatial technologies (GPS & GIS). Science-in-action videos showcase laboratory research on materials, fluids, and surveying practices in real-world engineering systems.

civil engineering

Pressure and Velocity in Inviscid Flow

Description

Transcript

Tags