3.9
Veneer
Veneer is a thin sheet of wood that is produced with a thickness of roughly one-eighth of an inch or less.
Positioning a log into a large lathe and spinning it against a long knife-edge, a continuous strip of veneer is gradually peeled off as the knife steadily penetrates the log, resulting in a rotary-cut veneer.
Plain-slicing, quarter-slicing, and rift-slicing are other methods used in the process of veneering.
Slicing veneer begins with preparing a portion of a log, known as a flitch, through sawing.
The flitch is then securely fixed horizontally against a sturdy movable frame.
A veneer knife, also mounted horizontally, is placed next to the flitch.
With each downward movement of the frame, the flitch is forced against the knife, resulting in a slice of veneer.
After each upward motion, the knife advances towards the flitch by the thickness of one veneer slice. Each sheet is only as wide as the section of the flitch.
Fine paneling, cabinetry, wood floorings, furniture making, and wood product manufacturing are common uses for veneers.
Veneer refers to a thin sheet of wood, typically produced to a thickness of about one-eighth of an inch or less. This material is crafted through various methods, the most common being rotary cutting. In this process, a log is mounted into a large lathe and spun against a knife edge, peeling off a continuous strip of wood as the knife penetrates deeper into the rotating log, creating a rotary-cut veneer.
Other veneering techniques include plain-slicing, quarter-slicing, and rift-slicing. These methods start with preparing a segment of the log called a flitch, which is sawn to the desired size. The flitch is then fixed horizontally against a movable frame. Adjacent to this, a horizontal veneer knife slices through the flitch as the frame moves downward, producing a thin sheet of veneer. After each slice, the knife advances closer to the flitch by the thickness of one veneer slice, ensuring consistent thickness across sheets.
Veneers are extensively used in various applications due to their aesthetic appeal and versatility. They are commonly utilized in fine paneling, cabinetry, wood flooring, furniture making, and the manufacturing of other wood products. These uses highlight the veneer's ability to provide a desirable wood finish while also maximizing the utility of timber by minimizing waste.
Veneer is a thin sheet of wood that is produced with a thickness of roughly one-eighth of an inch or less.
Positioning a log into a large lathe and spinning it against a long knife-edge, a continuous strip of veneer is gradually peeled off as the knife steadily penetrates the log, resulting in a rotary-cut veneer.
Plain-slicing, quarter-slicing, and rift-slicing are other methods used in the process of veneering.
Slicing veneer begins with preparing a portion of a log, known as a flitch, through sawing.
The flitch is then securely fixed horizontally against a sturdy movable frame.
A veneer knife, also mounted horizontally, is placed next to the flitch.
With each downward movement of the frame, the flitch is forced against the knife, resulting in a slice of veneer.
After each upward motion, the knife advances towards the flitch by the thickness of one veneer slice. Each sheet is only as wide as the section of the flitch.
Fine paneling, cabinetry, wood floorings, furniture making, and wood product manufacturing are common uses for veneers.
- Veneer - Thin sheet of wood used for its aesthetic appeal and versatility.
- Rotary Cutting - A veneer technique where a log is spun against a knife.
- Flitch - A segment of log prepared for plain, quarter or rift slicing methods.
- Plain-Slicing, Quarter-Slicing, and Rift-Slicing - Techniques producing veneer by slicing a flitch horizontally.
- Horizontal Veneer - A product of slicing a flitch against a movable frame.
- Define Veneer – Explain its utility and versatility (e.g., veneer).
- Contrast Rotary Cutting vs Plain-Slicing – Highlight differences (e.g., rotary veneer vs flitch veneer).
- Explore Veneering Techniques – Describe scenarios where each is most effective (e.g., rotary cutting for larger productions).
- Explain Veneer Production Process – clarify slicing and cutting mechanisms.
- Apply in Context – Explore how veneering improves resource efficiency and aesthetics in woodworking.
- What is veneer and how does its thinness impact its utility and versatility?
- How do rotary cutting and plain-slicing differ in veneer production?
- What are some examples of applications where different veneering techniques are used?
From Chapter 3:
Now Playing
3.9 : Veneer
Wood
627 Views
3.1 : Introduction to Wood
Wood
1.2K Views
3.2 : Softwoods and Hardwoods
Wood
969 Views
3.3 : Lumber
Wood
634 Views
3.4 : Structural Properties and Dimensions of Lumber
Wood
659 Views
3.5 : Seasoning of Wood
Wood
953 Views
3.6 : Wood Surfacing
Wood
544 Views
3.7 : Lumber Defects
Wood
903 Views
3.8 : Wood Fasteners
Wood
574 Views
3.10 : Wood Products
Wood
494 Views
3.11 : Wood Panel Products
Wood
584 Views