A subscription to JoVE is required to view this content. Sign in or start your free trial.

Method Article

Detecting Abnormal Prion Proteins in Brain Tissue Using Immunohistochemistry

941 views

July 8th, 2025

In This Article

Abstract

Source: Orge, L., et al. Detection of Abnormal Prion Protein by Immunohistochemistry. J. Vis. Exp. (2023).

This video demonstrates a technique to detect misfolded prion protein in brain sections using immunohistochemistry. Upon treating the brain section with formic acid to denature prions and minimize infection risk, as well as unmasking the prion aggregates using heat-induced epitope retrieval, the sections are immunolabeled for the misfolded prion protein aggregates and observed under a microscope.

Protocol

1. Tissue sectioning and slide preparation

  1. Cut sections of formalin-fixed, paraffin-embedded (FFPE) tissues at 3-5 µm thickness using a microtome.
  2. Float sections onto purified water with a temperature approximately 10 ˚C below the melting point of the paraffin used. Lift the sections from the water onto specially treated microscope slides (see Table of Materials). Allow the water to drain thoroughly from the slides.
  3. Incubate the slides overnight at 50 ˚C to enhance the slide adhesion of tissues.
    NOTE: It is preferable to prepare freshly sectioned tissues for IHC pr....

Access restricted. Please log in or start a trial to view this content.

Disclosures

No conflicts of interest declared.

Materials

List of materials used in this article
NameCompanyCatalog NumberComments
Absolute ethanolLabchemLB0507-9010Undiluted
            Diluted 90%, 70% and 50% in distilled water
Avidin-biotin complex and peroxidase
Vectastain Elite ABC kit Peroxidase
Vector LaboratoriesPK-6100Prepare and gently mix 30 min before use according to kit instructions. Do not mix after standing.
Biotinylated secondary antibody (Horse anti-mouse IgG H+L)Vector LaboratoriesBA-2000-1.5Dilute at 1/200 in TBS with 10% horse normal serum. Prepare the volume required depending on the number of sections.
Chromogen Diaminobenzidine- DAB, substrate kit, PeroxidaseVector LaboratoriesSK-4100Prepare before use according to kit instructions.
Use 400 µL of solution per section.
DakoCytomation Pascal pressure chamberDAKOS2800
Ehrlich's Hematoxylin:
Absolute ethanolLabchemLB0507-9010
Glacial acetic acidMerck101830
Potassium alumMerck1.01047.1000
GlycerinMerck1.04091.1000
Endogenous Peroxidase Block solution (3% concentration H2O2):40 mL Hydrogen peroxide (30% w/w) in 360 mL Methanol.
Prepare before use
Hydrogen peroxide (30% w/w)ScharlauHI0136
MethanolSigma Aldrich322415-2L
Formic acid 98%Merck1.00264.1000Undiluted
MicrotomeShandon-AS325MicrotomeShandon-AS325
Normal serum (20% ) block solution in TBS:
Horse normal serum
Gibco16050-122Prepare final volume according to the number of sections in the assay
(200 µL of solution per section).
Primary antibody anti-PrP Mouse MAb 2G11BIORADMCA2460PrP 146-R154R171182
Ovine including atypical scrapie, cervine, feline. Not suitable for bovine.
According to the number of sections in the assay (200 µL of solution per section) and antibody dilution, prepare final volume in TBS supplemented with 10% of normal serum from the species the secondary antibody was raised in (horse normal serum)
Usual antibody dilution: MAb 2G11 1/100 but working dilution should be established in every new batch to get the concentration to give the strongest labelling with lowest background. For storage, freeze aliquot volumes of a minimum of 10 μL into sterile microtubes. Defrost and use one aliquot at a time.
Primary antibody anti-PrP Mouse MAb 12F10Cayman Chemical Company189710PrP142-160
Bovine, not suitable for ovine
Usual antibody dilution: 1/200 but working dilution should also be established. Prepare as MAb 2G11
Shandon CoverplateTM chamberThermo Scientific72110017
Shandon Sequenza® Immunstaining centerThermo Scientific73300001
Shandon Sequenza® Immunstaining slide rackThermo Scientific73310017
Solution Citrate Buffer (10 mM pH 6.1):2.55 g Tri-sodium citrate dihydrate and 0.255 g Citric acid in one litre purified water.
Adjust pH of working solution to 6.1 using 10 mM citric acid solution (1.05 g citric acid in 500 mL purified water)
Prepare on assay day.
Tri-sodium citrate dihydrateSigma-aldrichS4641-500G
Citric acidSigma AldrichC0759
Staining jar and basketDeltalab19360
19361
Superfrost Plus microscope slidesVWR631-0108
Tris-Buffered Saline solution (TBS) (50 mM TRIZMA BASE; 0.8% NaCI; pH 7.6):10xTBS (stock solution 0.5 M TRIZMA BASE; 8% NaCI; pH 7.6):
TRIZMA BASE 60,57 g and NaCl 80 g in 800 mL purified water. Adjust pH of stock solution using Hydrochloric acid 37% and final volume to one litre with purified water (keep 5± 3 °C until 2 months)
Dilute TBS stock solution 1/10 on assay day.
TRIZMA BASESigma AldrichT6066-1KG
Sodium Chloride (NaCl)Merck106404
XylenePanreac Applied Chem ITW reagents251769Undiluted

Tags

Prion Protein DetectionFormic Acid TreatmentHeat-Induced Epitope RetrievalEndogenous Peroxidase InactivationPrimary Antibody BindingBiotinylated Secondary AntibodyAvidin-Biotin ComplexChromogenic SubstrateMicroscopic Observation