Split-and-pool Synthesis and Characterization of Peptide Tertiary Amide Library

Summary

Peptide tertiary amides (PTAs) are a superfamily of peptidomimetics that include but are not limited to peptides, peptoids and N-methylated peptides. Here we describe a synthetic method which combines both split-and-pool and sub-monomer strategies to synthesize a one-bead one-compound library of PTAs.

Abstract

Peptidomimetics are great sources of protein ligands. The oligomeric nature of these compounds enables us to access large synthetic libraries on solid phase by using combinatorial chemistry. One of the most well studied classes of peptidomimetics is peptoids. Peptoids are easy to synthesize and have been shown to be proteolysis-resistant and cell-permeable. Over the past decade, many useful protein ligands have been identified through screening of peptoid libraries. However, most of the ligands identified from peptoid libraries do not display high affinity, with rare exceptions. This may be due, in part, to the lack of chiral centers and conformational constraints in peptoid molecules. Recently, we described a new synthetic route to access peptide tertiary amides (PTAs). PTAs are a superfamily of peptidomimetics that include but are not limited to peptides, peptoids and N-methylated peptides. With side chains on both α-carbon and main chain nitrogen atoms, the conformation of these molecules are greatly constrained by sterical hindrance and allylic 1,3 strain. (Figure 1) Our study suggests that these PTA molecules are highly structured in solution and can be used to identify protein ligands. We believe that these molecules can be a future source of high-affinity protein ligands. Here we describe the synthetic method combining the power of both split-and-pool and sub-monomer strategies to synthesize a sample one-bead one-compound (OBOC) library of PTAs.

Introduction

Peptidomimetics are compounds that mimic the structure of natural peptides. They are designed to retain the bioactivity while overcoming some of the problems associated with natural peptides, including cell permeability and stability against proteolysis^1-3. Due to the oligomeric nature of these compounds, large synthetic libraries can be readily accessed through monomeric or sub-monomeric synthetic routes^4-7. One of the most studied classes of peptidomimetics is peptoids. Peptoids are oligomers of N-alkylated glycines that can be synthesized easily using a sub-monomer strategy^8,9. Many useful protein ligands have been successfully identified from screening large synthetic peptoid libraries against protein targets^1,10-14. Nonetheless, “hits” identified from peptoid libraries rarely archive very high affinity towards protein targets^1,10-14,22. One major difference between peptoids and natural peptides is that most of the peptoids generally lack the ability to form secondary structure due to the lack of chiral centers and conformational constraints. In order to solve this problem, multiple strategies were developed over the past decade, largely focusing on the modification of side chains contained on the main chain nitrogen atoms^15-22. Recently, we have developed a new synthetic route to introduce natural amino acid side chains onto a peptoid backbone to create peptide tertiary amides²³.

Peptide tertiary amides (PTAs) are a super family of peptidomimetics that include but are not limited to peptides (R₂ = H), peptoids (R₁ = H) and N-methylated peptides (R₁ ≠ H, R₂ = Me). (See Figure 1) Our synthetic route employs naturally occurring amino acids as the source of chirality and side chains on the α-carbon, and commercially available primary amines to provide N-substitutions. Therefore, a larger chemical space than that of simple peptides, peptoids or N-methylated peptides can be explored. Circular dichroism spectra have shown that PTA molecules are highly structured in solution. Characterization of one of the PTA-protein complexes clearly shows that the conformational constraints of PTA are required for binding. Recently, we have also discovered that some of the PTA molecules possess improved cell permeability than their peptoid and peptide counterparts. We believe that these PTA libraries can be a good source of high-affinity ligands for protein targets. In this paper, we will discuss the synthesis of a sample one-bead one-compound (OBOC) PTA library in details along with some improved conditions for the coupling and cleavage of these compounds.

Protocol

1. Basics of Split-and-pool Synthesis

In order to efficiently generate a large number of compounds on solid phase, split-and-pool synthesis is often employed as a general strategy. As shown in Figure 4, tentagel beads are first split into three portions. Each portion is reacted with a different reagent, generating the first residue on beads. After the first reaction, all three portions are pooled together, mixed, and then split again into three portions. Each portion will again react with a different reagent, generating the second residue on beads. After two split-and-pool steps, nine compounds are generated.

In sub-monomer synthesis, beads are first divided into several portions to react with different bromo acids in the presence of coupling reagent. After washing with solvent, all beads will be pooled together and mixed, then again divided into several portions to react with different primary amines. After amination, all beads are pooled together and washed thoroughly, completing a full monomer on each bead. This process can be repeated till desired diversity is reached.

2. Preparation of Acid Bromide from Natural Amino Acids

In sub-monomer synthesis, the synthesis of each monomer is divided into two separate steps: 1. coupling of acid bromide and 2. amination with primary amines (Figure 2). In order to synthesize a peptide tertiary amide, chiral acid bromides with side chains on the alpha carbon will be prepared from natural amino acids. Here we describe the method of transforming a natural amino acid into the corresponding acid bromide with high stereo fidelity. We use alanine as an example; other amino acids including serine, threonine, aspartic acid, glutamic acid, asparagine, glutamine, glycine, valine, isoleucine, phenylalanine can also be transformed into bromo acids under similar conditions. Note that some of the amino acids with functional groups like phenol, guanidine and amine need to be protected before the transformation. The reaction setup is shown in Figure 3.

Safety Precaution: For the following reactions involving HBr, NaNO₂ and other corrosive/toxic chemicals, proper safety equipment like safety goggles, lab coat, and chemical resistant gloves are needed. All reactions should be performed in a fume hood by experienced chemist.

1. Add 370 ml water into 630 ml 48% HBr solution to prepare a 1 L, 30% HBr solution. Add 500 ml ethylene glycol into a 1 L bath container; add dry ice to maintain the temperature at -10 °C. Caution: 48% HBr solution is strongly acidic and corrosive, handle with care. Read the MSDS before use.
2. Add D-alanine (8.9 g, 0.1 mol) and KBr (11.9 g, 0.1 mol) to a 250 ml three-neck round bottom flask with a magnetic stir bar. Add 100 ml, and the 30% HBr prepared in the previous step. Put the flask in the ethylene glycol bath prepared in step 2.1 and keep the temperature at -10 °C. Bubble argon through a long needle from the bottom of the flask for 10 min as shown in Figure 3. Stir the solution with the magnetic stir bar at 300 rpm.
3. Dissolve NaNO₂ (8.28 g, 0.12 mol) in a 100 ml beaker with 20 ml water. Add the solution into the pressure equalizing dropping funnel and seal the dropping funnel with a septum. Slowly turn on the valve of the dropping funnel and let the NaNO₂ solution drop into the flask. Control the valve to adjust the dripping rate to approximately 2 drops per sec. Keep the stirring at 300 rpm and keep the argon bubbling from the bottom of the flask. The flask should be kept in ethylene glycol bath at -10 °C until all NaNO₂ is added. Caution: This step generates heat and gas during the addition of NaNO₂ solution. Dripping rate should be carefully controlled and the whole system should be open through the argon outlet.
4. Keep stirring for 3 more hr and let the temperature warm up from -10 °C to room temperature. The resulting solution should be clear to light yellow; if the color is too dark, apply vacuum to remove the excess nitrogen oxides and possible Br₂ generated during the reaction.
5. Extract the product from the solution with 3x 35 ml diethyl ether using an extracting funnel. Combine the organic phase and wash it with saturated brine. The organic phase can also be washed with a small amount of NaHCO₃ prior to washing with brine to remove the color if it is dark. Dry the organic phase over Na₂SO₄ for 6 hr.
6. Filter out the Na₂SO₄ and evaporate the solvent under vacuum, crude product should be obtained as clear to pale yellow oil. Crude product can be further purified by distillation at 115 °C, 3 mm Hg, or by silica column with 3:1 hexane:ethyl acetate.
7. Pure product is obtained as clear oil, 6.6 g (yield 74%), density = 1.69 g/ml, [α]D20 = +24° (methanol), ¹H NMR (400 MHz, CDCl₃) δ 4.41 (q, J = 7.0 Hz, 1H), 1.86 (d, J = 7.0 Hz, 3H). In the case of (S)-2-bromopropanoic acid-d₄ (prepared from d₄-L-alanine), pure product is obtained as clear oil, yield 78%, density = 1.72 g/ml, [α]D20 = -19° (methanol). ¹H NMR, no significant H signal is observed. ESI-MS^- [M-1]^- = 155.1 (expected 154.97). For (S)-2-bromo-4-methylpentanoic acid (prepared from L-leucine using the same procedure) pure product is obtained as clear oil, yield 89%, [α]D20 = +37° (methanol), ¹H NMR (400 MHz, CDCl₃) δ 4.30 (t, J = 7.7 Hz, 1H), 1.94 (dd, J = 10.8, 3.9 Hz, 2H), 1.81 (tt, J = 13.2, 6.5 Hz, 1H), 0.96 (dd, J = 18.2, 6.6 Hz, 7H). In the case of (S)-2-bromo-3-phenylpropanoic acid (prepared from L-phenylalanine using the same procedure) pure product is obtained as pale yellow oil, yield 72%, [α]D20 = +17° (methanol), ¹H NMR (400 MHz, CDCl₃) δ 7.38 – 7.19 (m, 5H), 4.42 (dd, J = 8.1, 7.3 Hz, 1H), 3.47 (dd, J = 14.2, 8.2 Hz, 1H), 3.25 (dd, J = 14.2, 7.2 Hz, 1H).

3. Isotopic Labeling of Alanine Using Transaminase

In combinatorial library synthesis, especially in the split-and-pool synthesis of one-bead one-compound (OBOC) libraries, the amount of compound that can be obtained from each bead is relatively small. (Typically 1 pmol to 10 nmol). Additionally, mass spectrometry is widely used for the identification and characterization of the final compound due to its high sensitivity. In order to use mass spectrometry to determine the absolute stereochemistry at the chiral centers of the final PTA products, bromo acid enantiomers should be isotopically labeled before use. Here we describe the method of using transaminase and D₂O to label L-alanine.

1. Dissolve L-alanine (300 mg, 3.36 mmol) with 10 ml of D₂O in a 50 ml polyethylene tube. Add α-ketoglutarate (10 mg, 0.068 mmol) as co-substrate. Warm up the tube to 37 °C and adjust the pD to 8.5-8.7 using a 1 M NaOD soution. Note: pD is determined by pH test strips. Traditional electro pH meter equipped with glass electrode selective for H⁺ may give incorrect read out for D⁺.
2. Add alanine transaminase (0.1 mg, EC 2.6.1.2 from pig heart, Roche Diagnostics, Indianapolis, IN) to the pD 8.5 - 8.7, 37 °C solution prepared from previous step. Put the tube in a 37 °C incubator and incubate it overnight with mild shaking, 10 to 30 rpm is preferred.
3. After overnight incubation, take 0.5 ml of the D₂O solution and check the reaction progress by ¹H-NMR. All proton signals of alanine, δ 3.76 (q, J = 7.2 Hz, 1H), 1.46 (d, J = 7.3 Hz, 3H), ¹H NMR 400 MHz, should be greatly suppressed due to deuteration. More than 98% of the proton should be exchanged to deuterium as described previously²³. Note: D₂O can be partially recovered by distillation if the reaction is performed on large scale (>200 ml D₂O). Normally, 60% to 80% of D₂O can be distilled from the solution.
4. Freeze the above solution with liquid nitrogen and lyophilize it using a lyophilizer to obtain white deuterated L-alanine powder.

4. Synthesis of Peptoid Linker Region

The linker region is not required for PTA library synthesis. However, in order to avoid the high background in the lower molecular weight range (100-600) of MALDI mass spectroscopy and to improve the ionization of the compounds, a peptoid linker with multiple polar residues is often used. This peptoid linker can be synthesized through standard peptoid synthesis procedure. Here we will synthesize a pentamer of N-methoxyethyl glycine as the linker (as shown in Figure 5).

1. Swell 90 μm Tentagel beads with RAM linker (1 g, 0.27 mmol/g) in 10 ml DMF for 3 hr in a 12 ml syringe reactor with mild shaking.
2. Drain the DMF from the reactor and add 10 ml 20% piperidine DMF solution to deprotect the fmoc group from the Rink amide linker. Shake the beads with 20% piperidine solution for 30 min. Wash with DMF 5x to remove all piperidine.
3. Take a few beads out from the syringe and test it with chloranil test. Beads should turn dark brown (chloranil test positive for primary amine) if fmoc is successfully deprotected.
4. Prepare the following solutions: 1. 20 ml, 2 M bromoacetic acid/DMF solution; 2. 20 ml, 2 M DIC/DMF solution; 3. 10 ml, 1 M methoxylethylamine/DMF solution.
5. Add 5 ml of 2 M bromoacetic acid/DMF solution to the beads, shake gently. Then add 5 ml of 2 M DIC/DMF solution to the beads; seal the syringe with the plunger and put it on the shaker. Shake for 10 min.
6. Wash the beads with DMF thoroughly. Add 2 ml of 1 M methoxyethylamine/DMF solution prepared from step 4.4 to the beads. Seal the syringe with the plunger and shake it on the shaker for 30 min.
7. Wash the beads with DMF 5x. Check a few beads with chloranil test, if positive (beads turn blue), then continue to the next step. Otherwise, repeat step 4.6.
8. Repeat steps 4.5 to 4.7, 4x to complete the pentamer.

5. Split-and-pool Synthesis of PTA Library with (R)- and (S)-2-bromopropionic Acids

Here we describe the synthesis of a small PTA library with a theoretical diversity of 9,261 compounds using the 1 g of beads from step 4.8. Note that a 90 µm tentagel bead contains approximately 2.9 million beads per gram; therefore the redundancy of the library will be 2.9 x 10⁶ / 9,261 = 312 copies. We will use bromoacetic acid, (R)-2-bromopropanoic and isotopic labeled (S)-2-bromopropanoic acid-d₄ as the acids, and 7 different amines (A1 ~ A7, see Figure 5 for details) for amination. Syringe reactors and a vacuum manifold will be used to perform the synthesis.

1. Add 10 ml of 1:1 DCM:DMF to the syringe from step 4.8; use a 1,000 μl pipette with a truncated pipette tip to split all 1 g beads evenly into three 5 ml syringe reactors. Label them as B (bromoacetic acid), R ((R)-2-bromopropanoic) and S ((S)-2-bromopropanoic acid-d₄). Wash all 3 syringes with DCM 3x, and wash syringes labeled with R and S with anhydrous THF 3x, wash syringe labeled with B with DMF 3x.
2. Syringe R and S. BTC coupling of bromopropanoic acid.
   1. Prepare a fresh BTC/THF solution. Add approximately 200 mg of BTC into the vial in a fume hood, seal it with the cap. Weigh the amount of BTC in the vial. Calculate the amount of solvent needed and add anhydrous THF into the vial to make a 20 mg/ml BTC/THF solution.
   2. Prepare the bromo acids/BTC mixture. Add (R)-2-bromopropanoic acid (89 μl, 0.95 mmol) and (S)-2-bromopropanoic acid-d₄ (89 μl, 0.95 mmol) in two small vials separately. To each vial, add 5 ml of the above 20 mg/ml BTC/THF solution. Seal the two vials and put them in -20 °C freezer for 20 min.
   3. Add 1,125 μl, 2:1 THF/DIPEA (750 μl THF, 375 μl DIPEA, 2.2 mmol) to syringe R and S separately. Mix the beads with the pipette tip. Let them sit for 5 min.
   4. Take the two cooled bromo acids/BTC mixtures from step 5.2.2, add 2,4,6-Trimethylpyridine (356 μl, 2.7 mmol) to each vials. White precipitates will form immediately. Apply the corresponding suspension directly to the basified beads (syringe R and S in step 5.2.3) as soon as possible and then put them on a shaker to shake under 120 rpm for 2 hr.
      Note: The solution in the syringe reactors should be a pale yellowish suspension during the whole course of the reaction. A darker color is an indication of excessive heat released during the initial addition of the acid chloride solution. This can be solved by further cooling down or dilute the bromo acids/BTC mixture.
3. Syringe B. Bromoacetic acid coupling with DIC
   1. Prepare a fresh 20 ml, 2 M bromoacetic acid/DMF solution. Prepare a 20 ml, 2 M DIC/DMF solution.
   2. Add 2 ml of 2 M bromoacetic acid/DMF solution to syringe B, shake gently. Add 2 ml of 2 M DIC/DMF solution to syringe B, shake gently.
   3. Put syringe B on the same shaker as syringe R and S, shake it for 2 hr. Note that the coupling reaction of bromoacetic acid /DIC is done within 30 min; prolonged reaction time is for the convenience of split-and-pool synthesis.
4. After 2 hr, take syringe R, S and B from the shaker. Wash all three syringes thoroughly with DCM 5x. Then wash with DMF 5x. Note that syringe R and S cannot be washed with DMF before being washed with DCM or THF first.
5. Pool all the beads from syringes R, S and B into one 12 ml syringe reactor. Wash all the beads with DMF 5x.
6. Add 10 ml of 1:1 DCM:DMF to the syringe; use a 1,000 μl pipette with a truncated pipette tip to split all the beads evenly into 7 individual 2 ml syringes, label them as A1-A7.
7. Amination. Prepare 10 ml, 2 M primary amine/DMF solutions for each of the 7 amines listed in Figure 5. Add 5 ml of each amine solution to the corresponding syringe A1-A7. Incubate all 7 syringes in a 60 °C incubator with shaking overnight.
8. After incubation, wash all beads thoroughly with DMF.  Take a few of beads from each syringe and check with chloranil test. If the beads turn green (positive) within 3 min, proceed with next step. If negative, repeat step 5.7 for the negative syringes.
9. Repeat steps 5.1 to 5.8 2x to complete the trimer. Optional step: After each cycle, we recommend to check the synthesis quality by mass spectroscopy as described below. All 9,261 compounds are now synthesized on tentagel beads as OBOC library.
10. Mass spectroscopic confirmation of PTAs.
    PTAs are highly structured oligomers and possess many common features of N-methylated peptides. One of the common problems of solid phase synthesis of N-methylated peptides is the acid degradation during TFA cleavage. To suppress acid degradation, cleavage of molecules like cyclosporine from solid support is often carried out under low temperature. We compared various cleaving conditions for cleaving different PTA molecules from the solid support. We found that, generally, low temperature and reduced TFA concentration could effectively suppress acid degradation and provide purer compounds.
    1. Prepare 10 ml 1:1 TFA/DCM solution in a 15 ml tube. Seal the tube and put it in a -20 °C freezer for 20 min.
    2. Wash the beads that need to be cleaved with DCM 5x. Shake the beads in DCM for 15 min and wash the beads again with DCM 5x.
    3. Drain the DCM from the syringe. Use a light microscope and a pipette with truncated tip to transfer each individual bead into a 96-well plate, one bead per well.
    4. Cover the 96-well plate with a cover slip. Put the plate in a -20 °C freezer for 15 min.
    5. Take the cooled 1:1 TFA/DCM solution from step 5.10.1 and add 20 μl to each of the wells that contains a bead. Put the cover slip back and put the 96-well plate on a shaker in the -20 °C fridge.
    6. Shake for 20 min. Take the 96-well plate out and peel off the cover slip. Blow-dry the TFA/DCM from each well by blowing air or argon over it. If more than 10 beads are cleaved, a speedvac can be used to dry the TFA/DCM from the whole plate. Note that at this point, not all of the compounds are cleaved off the beads, but the cleaved compounds should be more than enough to perform the mass spectroscopy analysis.
    7. Add 20 μl 6:4 ACN:H₂O solution to dissolve the cleaved compounds from each well. Spot 0.6 μl of each compound solution together with 0.6 μl CHCA MALDI matrix on the MALDI plate.
    8. Use MALDI mass spectrometry to determine the molecular weight and sequence (MS/MS) of each compound.

6. Chloranil Test

1. Prepare the following reagents fresh for each test. Solution A: 2% Chloranil (CAS: 118-75-2) in DMF. Solution B: 2% acetaldehyde (CAS: 75-07-0) in DMF.
2. Mix 100 μl of solution A with 100 μl of solution B before the test in a 1.5 ml tube; drop the beads in and gently shake. If the beads turn blue within 5 min, it indicates the presence of secondary amine on the surface of the beads. Primary amines give a dark brown color instead of turning blue.

Results

Here we show three representative MALDI spectrums from a PTA trimer with linker. As shown in Figure 6A, when cleaved under room temperature using 50% TFA/DCM solution, significant degradation is observed. In Figure 6A, peak 593 and 484 correspond to the linker and the PTA trimer respectively, show that the whole molecule was successfully synthesized on bead but degraded during cleavage. When cleaved under low temperature condition as described above, the amount of TFA-induced degradation...

Discussion

Peptide tertiary amides (PTAs) are a superfamily of peptidomimetic oligomers. Besides the well-studied peptides, peptoids and N-methylated peptides, a large portion of compounds within this family remains understudied, majorly due to lack of synthetic method to access general N-alkylated peptides. Here we describe an efficient method to synthesize PTAs with chiral building blocks derived from amino acids. Previously, we have reported to use a new sub-monomer route to synthesis libraries of PTA molecules²³. We ...

Materials

List of materials used in this article

Name	Company	Catalog Number	Comments
2,4,6 trimethylpyridine	ACROS	161950010	CAS:108-75-8
2-morpholinoethanamine	Sigma-Aldrich	06680	CAS:2038-03-1
48% HBr water solution	ALFA AESAR	AA14036AT	CAS:10035-10-6
Acetaldehyde	Sigma-Aldrich	402788	CAS:75-07-0
Acetonitrile	Fisher	SR015AA-19PS	CAS:75-05-8
Anhydrous tetrahydrofuran (THF)	EMD	EM-TX0277-6	CAS:109-99-9
Benzylamine	Sigma-Aldrich	185701	CAS:100-46-9
bis(Trichloromethyl) carbonate (BTC)	ACROS	258950050	CAS:32315-10-9
Bromoacetic acid	ACROS	106570010	CAS:79-08-3
Chloranil	Sigma-Aldrich	23290	CAS:118-75-2
Cyclohexanemethylamine	Sigma-Aldrich	101842	CAS:3218-02-8
D2O	Cambridge Isotope	DLM-4-99.8-1000	CAS:7789-20-0
D-Alanine	Anaspec	61387-100	CAS:338-69-2
Dichloromethane (DCM)	Fisher	BJ-NS300-20	CAS:75-09-2
Dimethylformamide (DMF)	Fisher	BJ-076-4	CAS:68-12-2
Ethylene glycol	Oakwood	44710	CAS:107-21-1
Isopentylamine	Sigma-Aldrich	W321907	CAS:107-85-7
KBr	ACROS	424070025	CAS:7758-02-3
L-Alanine	Anaspec	61385-100	CAS:56-41-7
3-Methoxypropylamine	Sigma-Aldrich	M25007	CAS:5332-73-0
2-Methoxyethylamine	Sigma-Aldrich	143693	CAS:109-85-3
N-(3-Aminopropyl)-2-pyrrolidinone	Sigma-Aldrich	136565	CAS:7663-77-6
N,N'-Diisopropylcarbodiimide (DIC)	ACROS	115211000	CAS:693-13-0
N,N-Diisopropylethylamine (DIPEA)	Sigma-Aldrich	D125806	CAS:7087-68-5
NaNO2	ACROS	424340010	CAS:7631-99-4
NAOD 40% solution in water	ACROS	200058-506	CAS:7732-18-5
Piperidine	ALFA AESAR	A12442-AE	CAS:110-89-4
Piperonylamine	Sigma-Aldrich	P49503	CAS:2620-50-0
Propylamine	Sigma-Aldrich	240958	CAS:107-10-8
Trifluoroacetic acid	Sigma-Aldrich	299537	CAS:76-05-1
α-Cyano-4-hydroxycinnamic acid	Sigma-Aldrich	39468	CAS:28166-41-8
α-Ketoglutarate	ALFA AESAR	AAA10256-22	CAS:328-50-7
Tentagel Resin with RINK linker	Rapp-Polymere	S30023
Alanine transaminase	Roche	10105589001	AKA: Glutamate-Pyruvate Transaminase (GPT)
Incubator	New Brunswick Scientific	Innova44
NMR	Bruker	400 MHz
MALDI mass spectrometer	Applied Biosystems	4800 MALDI-TOF/TOF
Lyophilizer	SP Scientific	VirTis benchtop K
Syringe reactor	INTAVIS	Reaction Column	3 ml, 5 ml, 10 ml, 20 ml
Vacuum manifold	Promega	A7231	Vac-Man