Isolation and Characterization of Neutrophils with Anti-Tumor Properties

Summary

Neutrophils play an important role not only in host defense against invading microorganisms, but are also involved in the immune surveillance of tumor cells. Here, we describe techniques related to the isolation of neutrophils with anti-tumor properties and methods for monitoring anti-tumor neutrophil function in vitro and in vivo.

Abstract

Neutrophils, the most abundant of all white blood cells in the human circulation, play an important role in the host defense against invading microorganisms. In addition, neutrophils play a central role in the immune surveillance of tumor cells. They have the ability to recognize tumor cells and induce tumor cell death either through a cell contact-dependent mechanism involving hydrogen peroxide or through antibody-dependent cell-mediated cytotoxicity (ADCC). Neutrophils with anti-tumor activity can be isolated from peripheral blood of cancer patients and of tumor-bearing mice. These neutrophils are termed tumor-entrained neutrophils (TEN) to distinguish them from neutrophils of healthy subjects or naïve mice that show no significant tumor cytotoxic activity. Compared with other white blood cells, neutrophils show different buoyancy making it feasible to obtain a > 98% pure neutrophil population when subjected to a density gradient. However, in addition to the normal high-density neutrophil population (HDN), in cancer patients, in tumor-bearing mice, as well as under chronic inflammatory conditions, distinct low-density neutrophil populations (LDN) appear in the circulation. LDN co-purify with the mononuclear fraction and can be separated from mononuclear cells using either positive or negative selection strategies. Once the purity of the isolated neutrophils is determined by flow cytometry, they can be used for in vitro and in vivo functional assays. We describe techniques for monitoring the anti-tumor activity of neutrophils, their ability to migrate and to produce reactive oxygen species, as well as monitoring their phagocytic capacity ex vivo. We further describe techniques to label the neutrophils for in vivo tracking, and to determine their anti-metastatic capacity in vivo. All these techniques are essential for understanding how to obtain and characterize neutrophils with anti-tumor function.

Introduction

Neutrophils were initially characterized as the innate immune cells which serve as first line defense against invading microorganisms. Today it is known that neutrophils have more far-reaching functions, being involved in mounting adaptive immune responses against foreign antigens^1,2, regulating hematopoiesis³, angiogenesis⁴ and wound healing⁵. In addition, neutrophils may affect tumor growth and metastatic progression by virtue of their pro- and anti-tumor activities^6,7. Neutrophils are characterized by a polymorphic segmented nucleus (hence termed polymorphonuclear (PMN) leukocytes) and contain at least three distinct subclasses of granules as well as secretory vesicles⁸ (Figure 1A-C).

Neutrophils possess high phagocytic capacity and high NADPH oxidase activity critical for microbial elimination, and secrete a wide range of chemokines important for attraction of additional neutrophils and other immune cells to the site of inflammation^8,9. Neutrophils are characterized by the expression of a large amount of surface receptors including Toll-like receptors (TLRs), C-type Lectin Receptors (CLRs), complement receptor 3 (CD11b/CD18) and other adhesion molecules (e.g., L-selectin, LFA-1, VLA-4 and carcinoembryonic antigen-related cell adhesion molecule 3 (CEACAM3/CD66b)), chemokine receptors (e.g., CXCR1, CXCR2, CCR1, CCR2), chemoattractant receptors (e.g., PAFR, LTB₄R and C5aR), cytokine receptors (e.g., G-CSFR, IL-1R, IL-4R, IL-12R, IL-18R, TNFR), formyl-peptide receptors (e.g., FPR1-3), and Fc receptors (e.g., CD16 (FcγRIII), CD32 (FcγRII), and CD64 (FcγRI)¹⁰. In mice, neutrophils are usually identified as CD11b⁺Ly6G⁺, whereas human neutrophils are identified using the CD11b, CD15, CD16 and CD66b leukocyte markers. It is also generally accepted to stain for the granule proteins myeloperoxidase (MPO) and neutrophil elastase (NE) for detection of neutrophils in tissues.

It is still unclear whether the diverse functions of neutrophils are mediated by the same cell or by distinct cell sub-populations. Accumulating data suggest for the presence of a heterogenic neutrophil population that exhibits a high degree of plasticity affected by pro-inflammatory stimuli and the microenvironment^11,12. Fridlender et al.¹³ have grossly divided the neutrophils in cancer into two major sub-populations termed N1 with anti-tumor properties and N2 with pro-tumor properties. In cancer, as well as in chronic inflammation, there is an additional sub-population composed of granulocytic myeloid-derived suppressor cells (G-MDSCs) that suppress T cell responses¹⁴. G-MDSCs are considered to be immature myeloid cells characterized by a CD11b⁺Ly6C^lowLy6G^hi phenotype in mice¹⁵, while having a CD15⁺/CD16^low phenotype in human¹⁶. G-MDSCs express higher levels of arginase and myeloperoxidase, while lower levels of cytokines and chemokines than normal circulating neutrophils. They are less phagocytic and migratory, but produce higher levels of ROS^15,17,18. In the present paper we will describe some basic methodologies for isolation and characterization of neutrophils with anti-tumor properties.

While neutrophils constitute the largest population of all white blood cells in the human circulation (45 - 70%; 1,800 - 6,000/μl), in mice, under normal conditions, they are rather sparse (10 - 15%; 300 - 500/μl). The neutrophil count increases steadily upon inflammation and occasionally in cancer, which represents a state of chronic inflammation⁷. Neutrophils develop from multipotent common myeloid precursor (CMP) cells in the bone marrow, through a differentiation process passing the stages of myeloblasts (MB), promyelocytes (PM), myelocytes (MC), metamyelocytes (MM) and band cells (BC)⁸. The mature, post-mitotic neutrophils may remain within the bone marrow for 4 - 7 days before they are released to the circulation⁸. Neutrophil turnover in the blood is usually rapid with an average half-life of 6 - 12 hrs, which may be prolonged under inflammatory conditions. Unstimulated neutrophils have limited anti-tumorigenic activity, a feature that can be acquired by exposing the naïve neutrophils to the chemokines IL-8 (CXCL2), CCL2, CCL5 and CXCL5^6,19 or artificially, by exposing them to the phorbol ester phorbol 12-myristate 13-acetate (PMA)⁶.

The short half-life of blood neutrophils together with the low number of neutrophils (~ 3 - 5 x 10⁵) achieved from 1 ml blood of a naïve 6 - 8 week old mouse, have made it difficult to explore the function of circulating mouse neutrophil in vitro. To overcome this difficulty, other sources have been used. For instance, large numbers of neutrophils may be obtained from the bone marrow²⁰ or the peritoneum following the induction of sterile inflammation (e.g., after intraperitoneal injection of thioglycollate broth or Zymosan A). It should be noted that neutrophils obtained from the peritoneal cavity do not exert any anti-tumorigenic activity (unpublished observation).

Granot et al.⁶ observed that BALB/c mice inoculated orthotopically with the mouse 4T1 breast carcinoma cell line develop neutrophilia which aggravates with tumor progression⁶ (Figure 2A), such that 20 - 40 million blood neutrophils can be easily isolated from 1 ml blood 3 - 4 weeks post-tumor inoculation. These neutrophils have acquired anti-tumor activities, and have accordingly been coined tumor-entrained neutrophils (TEN), in order to distinguish them from naïve neutrophils⁶ (Figure 2B). While high-density neutrophils (HDN, Figure 1A) are highly anti-tumorigenic, low-density neutrophils (LDN, Figure 1B) generated in the context of cancer are not²¹. Also, high-density neutrophils from the bone marrow and spleen of tumor-bearing mice have anti-tumor activity (unpublished data). It should be noted that with tumor progression the spleen becomes gradually enlarged (splenomegaly), with increasing amounts of neutrophils.

It should be noted that TEN are also generated in other models of cancer including both spontaneous (MMTV-PyMT and MMTV-Wnt1 mammary tumors and k-Ras driven lung tumors) and injected (AT-3 (MMTV-PyMT) and E0771 breast carcinoma cells, LLC Lewis lung carcinoma cells and B16-F10 melanoma cells). However, the extent of neutrophil mobilization in these tumor models is far less than of 4T1-inoculated mice, reaching 5 - 10 x 10⁶ neutrophils in 1 ml blood after 3 weeks.

Protocol

Animals: 5-7 weeks old BALB/c mice are purchased from Harlan (Israel). All experiments involving animals were approved by the Hebrew University’s Institutional Animal Care and Use Committee (IACUC). Human samples: Collection of blood from cancer patients and healthy volunteers was approved by Hadassah Medical Center Institutional Review Board (IRB).  

1. Induction of Neutrophils with Anti-tumor Properties in vivo Using a Breast Cancer Mouse Model.

NOTE: All steps should be performed using sterile solutions in a laminar airflow (LAF) Bio-Safety cabinet.

1. Seed 5 x 10⁵ 4T1 cells in 100 mm tissue culture plate in 10 ml of Dulbecco's modified Eagle medium (DMEM) containing 4.5 g/L D-glucose supplemented with 10% heat-inactivated fetal bovine serum (FBS), 2 mM D-glutamine, 1 mM sodium pyruvate, 100 U/ml penicillin G and 100 μg/ml streptomycin sulfate. Incubate the cells at 37 °C in a humidified incubator containing 5% CO₂ for 3 to 4 days. Ensure that the cells are 50 - 100% confluent on the day of the experiment.
2. To detach the tumor cells from the tissue culture plate, aspirate the culture medium, wash the cells with 5 ml PBS, aspirate the PBS and add 3 ml of a 2.5 g/L trypsin solution. Incubate the cells 2 - 3 min with trypsin at 37 ºC.
3. Add 10 ml serum-containing medium to neutralize the trypsin and pipette up and down until all of the cells have been detached. Transfer the cells suspension to a 15 ml conical centrifuge tube.
4. Centrifuge the cells at 200 x g for 5 min at RT. Aspirate the medium leaving 200 μl medium above the cell pellet. Resuspend the cells in the residual volume and add 10 ml of PBS. Invert the tube 2 - 3 times to get a homogeneous cell suspension and take out 10 μl to count the cells in a hemocytometer. Use trypan blue to distinguish between live and dead cells.
5. Centrifuge the cell suspension for 5 min at 200 x g at RT. Aspirate the PBS and resuspend the cells in PBS at a final concentration of 2 x 10⁶ cells/ml. Ensure that the single cell suspension has no clumping.
6. Inject 1 x 10⁶ 4T1 cells or luciferase-expressing 4T1 cells in 50 μl PBS orthotopically into the left inguinal mammary fat pad of female BALB/c mice using a 0.3 ml syringe with a 30G x 8mm needle.
   1. Before injection, anesthetize the mice in an induction chamber receiving a slow flow rate of isoflurane (3 - 5%) in 100% oxygen.
   2. Lay the mouse on a sterile surgical pad and make sure the head is properly placed inside the isoflurane nose cone. Confirm proper anesthesia by pinching the paw. Use vet ointment on eyes to prevent dryness while under anesthesia. Shave the hair around the injection site and disinfect with 70% EtOH.
   3. Use a sterile set of surgical tools to make a small horizontal incision (5 mm) approximately half way between the inguinal and the abdominal nipples, expose the fat pad and inject 1 x 10⁶ 4T1 cells in 50 μl. Close the incisions with 9 mm clips that should be removed one week later. Injection of luciferase-expressing cells allows monitoring of tumor size and metastasis by bioluminescence imaging.
      NOTE: This minimally invasive procedure does not require any post-surgical treatment and the injected mice recover within 2 - 3 min.
   4. Monitor the mice until they regain consciousness, and make sure they regain full consciousness before joining the company of other mice.
7. After 3 - 4 weeks, when the primary tumor has reached a volume of 2 cm³, sacrifice the mice by a slow CO₂ stream, and immediately after the last breath, obtain blood by cardiac puncture using a 25G x 5/8' needle connected to a 1 ml tuberculin syringe pretreated with heparin. Keep the mouth of the needle upward when inserting the syringe in a horizontal position through the diaphragm towards the heart, and slowly and gradually draw the blood avoiding excess pressure (Figure 3).

2. Neutrophil Isolation

1. Isolation of cytotoxic neutrophils from blood of tumor-bearing mice.
   1. Dilute 1 ml blood drawn from a tumor-bearing mouse (see Protocol 1.11) in PBS containing 0.5% (w/v) bovine serum albumin (BSA) to a final volume of 6 ml.
   2. Fractionation of diluted blood on a freshly prepared discontinuous sucrose gradient:
      1. Add 3 ml of sterile-filtered sucrose 1.119 g/ml to the bottom of a 15 ml conical polypropylene centrifuge tube.
      2. Slowly and carefully, layer 3 ml of sterile-filtered sucrose 1.077 g/ml on top of the 1.119 g/ml layer. Thereafter, add slowly and carefully the 6 ml of diluted blood (Protocol 2.1.1) on top of the 1.077 g/ml layer (Figure 4A). It is recommended to hold the tube tilted and adding the different components by a slow, but continuous flow, keeping the mouth of the pipette towards the lower wall of the tube, such that no turbulence is formed.
   3. Centrifuge the tube containing the diluted blood on the sucrose gradient at 700 x g for 30 min at RT without brake.
   4. Carefully remove the tube from the centrifuge without causing any turbulence. Most of the erythrocytes will be at the bottom of the tube. High-density neutrophils (HDN) are found as a white-to-red ring at the interface between the 1.119 g/ml and the 1.077 g/ml layers (around the 3 ml mark), while the low-density leukocytes are found in a white ring at the interface between the 1.077g/ml layer and the BSA-containing PBS (around the 6 ml mark, see Figure 4B).
   5. Aspirate the PBS + 0.5% BSA until reaching 5 mm above the low-density cell layer. Pipette out the low-density cells by slow suction into a 1 ml tip through slowly swirling around the cells. Transfer the cells into 30 ml of PBS with 0.5% BSA.
   6. Aspirate the upper layer in the same gradient tube until reaching 5 mm above the high-density cell band. Pipette out the high-density cells, which are mostly high-density neutrophils, and transfer the cells into 30 ml of PBS containing 0.5% BSA.
   7. Centrifuge the cells at 400 x g for 10 min at RT.
   8. Aspirate the supernatant and lyse erythrocytes by resuspending the cells in 36 ml sterile HPLC grade water for 30 sec. Isotonicity should be restored by adding 9 ml of a 5x concentrated PBS supplemented with 2.5% (w/v) BSA.
   9. Centrifuge the cells at 400 x g for 10 min at RT.
   10. Aspirate the supernatant, and resuspend the cells in PBS-BSA. Count the number of neutrophils in a hemocytometer and use trypan blue to distinguish between live and dead cells.
   11. Centrifuge the cells at 400 x g for 10 min at RT and resuspend the neutrophils in desired incubation medium to final cell density. Use the neutrophils immediately.
   12. Then, after another centrifugation, resuspend the neutrophils in incubation medium to final cell density. Use the neutrophils immediately.
2. Isolation of circulating neutrophils from cancer patients.
   1. Mix 10 ml of heparinized (20 U/ml) human blood with an equal volume of 3% Dextran T500 in saline and incubate for 30 min at RT. During this incubation the erythrocytes will sediment.
   2. Prepare a 50 ml conical polypropylene tube with 10 ml sucrose 1.077 g/ml and slowly layer the leukocyte-rich supernatant on top of the 1.077 g/ml sucrose layer (Figure 4C).
   3. Centrifuge at 400 x g for 30 min at RT without brake. The high-density neutrophils (HDN) will appear in the pellet. Low-density neutrophils (LDN) co-purify with monocytes and lymphocytes at the interface between the 1.077 g/ml sucrose layer and plasma (Figure 4D).
   4. Resuspend the neutrophils in 10 ml 0.2% NaCl for 30 sec to lyse the contaminating erythrocytes, and restore isotonicity by adding 10 ml of 1.6% NaCl and invert once.
   5. Centrifuge 5 min at 160 x g at RT, and wash three times in 20 ml Hanks' balanced salt solution. Centrifuge after each wash and aspirate the supernatant.
   6. Count the neutrophils and resuspend the cells in RPMI-1640 supplemented with 2% FBS at 2 x 10⁶ neutrophils/ml or as desired.

3. Enrichment of Blood Neutrophils Using Magnetic Beads

1. Positive selection
   1. Take 1 ml of blood from a mouse as described in Protocol 1.8, with a heparinized syringe.
   2. Centrifuge the blood in a 15 ml conical tube at 400 x g for 5 min at RT.
   3. Aspirate the supernatant or keep the blood plasma for further studies.
   4. Lyse the erythrocytes by resuspending the cells in 8 ml HPLC-grade water. After 30 sec restore isotonicity by adding 2 ml of 5x concentrated PBS containing 2.5% BSA. Count the cells.
   5. Centrifuge at 400 x g for 5 min at RT.
   6. Resuspend the cell pellet in 200 μl PBS containing 0.5% BSA and 2 mM EDTA per 10⁸ cells.
   7. Add 50 μl of biotinylated anti-Ly6G antibody. Mix well and incubate for 10 min in the refrigerator (not on ice).
   8. Add 150 μl cold PBS containing 0.5% BSA and 2 mM EDTA.
   9. Vortex the anti-biotin coated magnetic microbead stock solution. Transfer 100 μl to the cell suspension. Mix well and incubate for 15 min in the refrigerator (not on ice).
   10. Wash cells by adding 10 ml PBS containing 0.5% BSA and 2 mM EDTA, and centrifuge at 400 x g for 10 min at RT.
   11. Aspirate supernatant completely, and resuspend in 500 μl cold PBS containing 0.5% BSA and 2 mM EDTA.
   12. Insert a magnetic separation column into a magnet holder that is attached to a magnetic stand, and rinse it with 500 μl cold PBS containing 0.5% BSA and 2 mM EDTA.
   13. Apply the cell suspension onto the column. The flow-through contains unlabeled LyG6-negative cells.
   14. Wash the column with 500 μl PBS containing 0.5% BSA and 2 mM EDTA. Additional unlabeled cells will be in the flow through.
   15. Repeat the washing step with another 500 μl PBS containing 0.5% BSA and 2 mM EDTA.
   16. Remove the column from the magnet and place it on a 15 ml collection tube. Add 1 ml of PBS containing 0.5% BSA and 2 mM EDTA, and flush out the magnetically labeled cells by firmly pushing the plunger into the column. The flow through contains Ly6G⁺ neutrophils.
2. Negative selection
   1. Prepare blood leukocytes according to steps 3.1.1 to 3.1.5.
   2. Resuspend 1 x 10⁸ cells in 1 ml PBS containing 0.5% BSA and 2 mM EDTA in a 5 ml polystyrene round-bottom tube.
   3. Add 50 μl normal rat serum.
   4. Add 50 μl of neutrophil enrichment cocktail (containing biotinylated antibodies specific for non-neutrophil white blood cells), mix well and incubate for 15 min in the refrigerator.
   5. Wash the cells by adding 4 ml PBS containing 0.5% BSA and 2 mM EDTA, and centrifuge 400 x g for 10 min.
   6. Discard the supernatant and resuspend the cells in 1 ml PBS containing 0.5% BSA and 2 mM EDTA.
   7. Add 50 μl of tetrameric antibody complexes directed against biotin and dextran. Mix well and incubate for 10 min in the refrigerator.
   8. Vortex well the tube containing dextran-coated magnetic beads before adding 150 μl to the cell suspension. Mix well and incubate 10 min in the refrigerator.
   9. Bring the cell suspension to a total volume of 2.5 ml by adding PBS containing 0.5% BSA and 2 mM EDTA. Mix gently to get a homogenous cell suspension.
   10. Insert the tube (without the cap) into the magnet, and let stand for 3 min.
   11. Invert the magnet with the tube in one continuous motion such that the unbound cells in the fluid will be transferred to a new tube. Leave the magnet and tube inverted for 2 - 3 sec, then return to upright position. The magnetically labeled unwanted cells will remain bound to the wall of the original tube, while the unbound neutrophils will be in the transferred fluid.

4. Cytological Staining of Neutrophils

1. Resuspend 1x10⁵ neutrophils in 50 µl PBS and transfer the cell suspension to a thin-layer cell preparation adaptor such as a Cytospin. Centrifuge the adaptor at 150 x g for 5 min. Separate the pre-labeled glass slide from the adaptor.
2. Fix cells by dipping the glass slides in 70% ethanol for 2 min. Allow the preparations from the adaptor (see step 4.1) to dry at RT before staining. Dip the slides 5 - 6 times in distilled water.
3. Stain 1 - 2 min in Mayer's Hematoxylin solution. Rinse 1 min in tap water. Stain 10 sec in Eosin Y solution. Wash in Tap water. Dehydrate by rinsing the slides in increasing ethanol concentrations (70%, 96% and 100%). Let the glass slides air-dry shortly and inspect the slides under a light microscope.
   NOTE: Hematoxylin has a deep blue-purple color and stains nucleic acids, whereas eosin is pink and stains proteins nonspecifically. The cytoplasmic granules of neutrophils remain unstained by acidic or basic dyes, which is the origin for the name 'loving to be neutral'. Whereas basophilic granulocytes stain dark blue with hematoxylin and eosin and eosinophilc granulocytes bright red, neutrophils appear neutral pink (See Figure 1A). Mature neutrophils are characterized by a polymorphonuclear nucleus, which is in general large with 2 - 5 lobes 'segmented neutrophils' (Figure 1A and 1C). Immature neutrophils are characterized by a one-lobed curved or ring-shaped nucleus (Figure 1B).

5. Determination of the Purity of Neutrophils by Flow Cytometry.

1. Resuspend 1x10⁶ cells in 100 μl of FACS buffer (PBS containing 0.5% BSA, 2 mM EDTA and 0.02% NaN₃). For whole blood samples, hemolysis is required before staining (steps 3.1.1 to 3.1.5). Add 10 μl of FcR Blocking Reagent for 5 min.
2. Add 0.5 μg of fluorescent-labeled antibody with a specificity to Ly-6G for mouse neutrophils or to CD11b and CD66b for human neutrophils, mix well and incubate for 15 min at RT.
3. Adjust volume to 500 μl with PBS containing 0.5% BSA and 2 mM EDTA and analyze staining by flow cytometry.

6. Follow Neutrophil Gate in vivo

1. In vivo BrdU labeling of neutrophils
   1. Inject 100 μl of a 10 mg/ml bromodeoxyuridine (BrdU) solution in sterile PBS intraperitoneally to tumor-bearing mice.
   2. Isolate blood neutrophils 48 hrs post-injection according to Protocol 2.1. Stain BrdU-labeled neutrophils using a BrdU flow kit.
2. CFSE labeling of neutrophils
   1. Resuspend 10⁷ neutrophils in 1 ml of pre-warmed PBS.
   2. Add 2 μl of a 5 mM CFSE stock solution to the suspended neutrophils to a final concentration of 10 μM. Mix well and incubate for 15 min at 37 °C. 5 mM CFSE is prepared by dissolving 2.8 mg of CFSE (5-(and 6-)-Carboxyfluorescein diacetate, succinimidyl ester) in 1 ml DMSO. Divide into 10 μl aliquots in sterile 200 μl tubes and store in the dark at -20 °C.
   3. Neutralize excess CFSE by adding an equal volume of RPMI-1640 containing 10% FBS. Incubate for 10 min at 37 °C. Centrifuge the neutrophils at 400 x g for 10 min at RT. Wash the neutrophils twice in 10 ml of RPMI-1640 containing 10% FBS.
   4. Centrifuge at 400 x g for 10 min and resuspend in an appropriate volume of PBS. The neutrophils (e.g., 1 x 10⁷ cells) can now be injected intravenously or via cardiac injection to recipient mice.

7. In vitro Luciferase Assay to Monitor the Anti-tumor Activity of Isolated Neutrophils.

1. Cultivate luciferase-labeled tumor cells as described for 4T1 cells in Protocol 1.1-1.5, but resuspend the trypsin-dissociated cells in optimized reduced serum medium supplemented with 2% FBS. Adjust the cell density to 5 x 10⁴ cells per ml.
2. Seed 5,000 luciferase-labeled tumor cells in 100 μl optimized reduced serum medium containing 0.5% FBS in each well of a white 96-flat-bottom tissue-culture well plate.
3. 4 hrs after seeding the tumor cells, add 1 x 10⁵ neutrophils in 50 μl optimized reduced serum medium containing 0.5% FBS, and incubate O/N. Prepare a neutrophil cell suspension with a density of 2 x 10⁶ cells/ml. Control wells should get 50 μl medium without neutrophils. Do multiple repeats of each experimental setting.
4. On the following morning, gently aspirate the supernatant and wash each well with 200 μl PBS. Aspirate the PBS and add 50 μl of passive lysis buffer. For easily detaching cells (such as AT-3 cells), do not wash in PBS and add the cell culture lysis buffer immediately after aspirating the growth medium.
5. Cover the plate with aluminum foil and incubate it on an orbital shaker at 150 rpm for 20 min at RT.
6. Place the plate in a luminescence plate reader. Inject well-wise 50 μl luciferase assay solution, and read the chemiluminescence for 10 sec per well.
7. Calculate the % tumor lysis by the following formula: % tumor lysis = (1-[luminescence of samples with neutrophils]/[luminescence of samples in medium]) x 100%.

NOTE: To assess the contribution of neutrophils to metastatic seeding, neutrophils may be depleted as described in protocol 8.1. For effective depletion administer neutrophil-depleting antibodies starting on day 7 post-tumor engraftment.

8. Anti-metastatic Activity of Neutrophils in a Breast Cancer Mouse Model.

1. In vivo depletion of neutrophils.
   1. Freshly prepare 12.5 μg of rat anti-Ly6G antibody (neutrophil depleting antibody) or of rat isotype control antibody (IgG_2a, Κ) in saline at a final volume of 100 μl per mouse.
   2. Starting on day 3 post-tumor engraftment inject daily an intraperitoneal dose of 12.5 μg rat anti-Ly6G antibody (100 μl). Inject control mice with or 12.5 μg (100 μl) rat isotype control antibody (IgG_2a, Κ).
   3. Starting on day 14, administer the antibodies twice daily, as the neutrophil production rate dramatically increases when the 4T1 tumor grows.
   4. Every other day, obtain a blood sample (2 - 3 drops) by nicking the lateral tail-vein. Collect the blood into an anti-coagulant containing tube (Heparin, Citrate or EDTA).
   5. Verify neutrophil depletion using flow cytometry as described in Protocol 5.
2. Tumor Neutralization Test (Modified Winn Assay)
   1. Isolate neutrophils from tumor-bearing mice. Mix 1 x 10⁶ tumor cells and 3 x 10⁶ neutrophils in 50 μl saline (per mouse).
   2. Inject the cells subcutaneously to the flank of 6 - 8 weeks old naïve BALB/c mice. Shave the flank prior to tumor engraftment to allow accurate measurements of tumor size. Measure tumor size daily starting on day 5 post-engraftment.
3. Neutrophil Adoptive Transfer
   1. Inject 2 x 10⁴ luciferase-expressing tumor cells in 200 μl PBS to the tail vein.
   2. Neutrophil transfer should be performed 4 hrs following tumor cell injection. Hence, start the purification of HDN from tumor-bearing mice (protocol 2.1) approximately 2 hrs before their planned in vivo transfer. Resuspend neutrophils in PBS at a final concentration of 2.5 x 10⁷ cells/ml.
   3. 4 hrs after introducing the tumor cells place the mice under a heat lamp for 5 min. Place the mice in a restrainer and inject 5 x 10⁶ HDN (200 μl) via the tail vein. Control mice are injected with vehicle (PBS).
   4. Monitor the formation of lung metastases at various time points by using a bioluminescence in vivo imaging system or by immunohistochemistry.
4. Lung metastatic seeding assay
   1. Inject 0.5 - 1 x 10⁶ parental 4T1 cells orthotopically into the left inguinal mammary fat pad as described in Protocol 1.
   2. On day 10, resuspend GFP-expressing 4T1 cells in PBS at a final concentration of 5 x 10⁵ cell/ml. Place the mice under a heat lamp for 5 min.
   3. Place the mice in a restrainer and inject 1x10⁵ GFP-expressing 4T1 cells (200 μl) intravenously to 4T1 tumor-bearing mice or naïve mice.
   4. On the following day, euthanize the mice and perfuse the lungs with 20 ml PBS to remove remaining RBCs.
   5. Excise the lungs for analysis of GFP-positive cells by immunohistochemistry.  
      NOTE: To assess the contribution of neutrophils to metastatic seeding, neutrophils may be depleted as described in protocol 8.1. For effective depletion administer neutrophil-depleting antibodies starting on day 7 post-tumor engraftment.

9. Suppression of T Cell Proliferation by Neutrophils from Tumor-bearing Mice.

1. Remove the spleen from a euthanized naïve BALB/c mouse and place in 10 ml PBS.
2. Place the spleen onto a 40 μm cell strainer that is fit on a petri dish filled with RPMI-1640. Using the plunger end of the syringe, mash the spleen through the cells strainer into the petri dish. Rinse the cell strainer with 5 ml RPMI. Discard the strainer.
3. Transfer the resuspended cells into a 50 ml conical tube and centrifuge 400 x g for 10 min.
4. Discard the supernatant, and lyse the erythrocytes by suspending the cells into 36 ml of pure water for 20 sec, and adjust to isotonicity by adding 4 ml of PBS concentrated x 10. Alternatively, lyse the erythrocytes by suspending the cells into 5 ml of erythrocyte lysing buffer (ACK), and incubate 5 min at RT. Neutralize the ACK by adding 10 ml of RPMI-1640 medium. Centrifuge at 400 x g for 10 min at RT. Resuspend the cells in 5 ml PBS and count the cells.
5. Resuspend the splenocytes in PBS to a final density of 4 × 10⁷cells/2 ml in 15 ml tube. Add 2 ml of a 2.5 μM CFSE solution in PBS. Quickly invert the tube and incubate for 10 min at 37 °C with occasional mixing (every 2 min), protected from light.
6. Quench excess CFSE by adding 4 ml of pre-warmed FBS (100%) and incubate for 1 min at RT. Add 3 ml of PBS and centrifuge at 400 x g for 10 min.
7. Wash the cells with 30 ml PBS, and centrifuge at 400 x g for 10 min.
8. Filter the cells through a 40 μm cell strainer and wash again with PBS.
9. Resuspend the cells in RPMI-1640 medium supplemented with 10% FBS to a final density of 2 x 10⁷ cells/ml.
10. Seed 2 x 10⁶/well (200 μl) in a 24-well tissue-culture plate.
11. Stimulate the cells by adding 1 μg of purified Armenian hamster anti-mouse CD3ε antibody in 500 μl RPMI-1640 with 10% FBS.
12. Add 2 x 10⁶ HDN or LDN in 300 μl RPMI-1640 with 10% FBS to the CFSE-labeled splenocytes, and incubate for 3 days at 37 °C. Wells without neutrophils should get 300 μl medium. Total volume in each well should be 1 ml.
13. Collect the cells and prepare them for flow cytometry. Resuspend the cells in 100 μl FACS buffer (Protocol 5), and add 10 μl of FcR Blocking Reagent. Incubate for 5 min at RT.
14. Add 1 μl of APC-conjugated anti-CD8α antibody and incubate for 15 min at RT.
15. Determine the CFSE fluorescence intensity on CD8⁺ T cells by flow cytometry (Figure 5). The CFSE intensity is halved upon each cell division. Thus, the number of cell divisions can be determined by the intensity of CFSE staining.

10. Neutrophil Migration Assay

1. Seed 5x10⁵ 4T1 cells in 7 ml optimized reduced serum medium supplemented with 0.5% FBS in a 25 cm² tissue culture flask and incubate 24 hrs at 37 °C.
2. Transfer 800 μl of the supernatant to the bottom chamber of a migration plate with a pore size of 5 µm.
3. Resuspend 2 x 10⁵ neutrophils in 400 μl of optimized reduced serum medium supplemented with 0.5% FBS. Apply the cell suspension to the top chamber and incubate for 2 hrs at 37 °C.
4. At the end of incubation, remove the top chamber and count the number of neutrophils that have migrated to the bottom chamber.

11. Monitoring Neutrophil Production of Reactive Oxygen Species (ROS).

1. Prepare 1.1 x 10⁶ neutrophils/ml in Hank's balanced salt solution without phenol red. Plate 180 μl containing 2 x 10⁵ neutrophils in each well of a white 96-flat-bottom well plate.
2. Place the plate in a luminescence plate reader. Add 20 μl of a 500 μM Luminol solution in PBS to each well to get a final concentration of 50 μM. Read the basal chemiluminescence for 1sec in a time course of 5 min with 10 sec intervals.
3. Add a stimulant (e.g., PMA at a concentration of 10 nM or 100 nM or fMLP at a concentration of 10 μM). Prepare a 10x concentrated solution of each agent in Hank's balanced salt solution without phenol red and add 22 μl to the respective wells. To control wells add 22 μl vehicle.
4. Measure the chemiluminescence in the plate reader. Do both a short (every 10 sec for 5 min) and a long (every minute for 1 hr) time course.

Results

In a recent study we identified an anti-metastatic function for neutrophils⁶. Neutrophils from tumor-bearing mice acquire a cytotoxic phenotype and have the capacity to kill tumor cells⁶. This is in contrast to neutrophils from naïve mice that have no significant anti-tumor effect⁶. Several of the techniques described in the Protocol Section have been used for studying anti-tumor neutrophil function in vitro and in vivo⁶.

Tumor cyto...

Discussion

Neutrophils are the most abundant of all white blood cells and are the first responders in cases of infection and inflammation. As such, they are highly sensitive to external cues and are easily activated. In addition, neutrophils have a very short half-life and a rapid turnover. Together, these characteristics raise several difficulties in working with neutrophils, such that unique experimental strategies are required. For example, there are several neutrophil purification strategies, each with its own pros and cons.

Materials

List of materials used in this article

Name	Company	Catalog Number	Comments
CELL LINES
Mouse 4T1 breast carcinoma cells	ADCC	CRL-2539	Growth medium: DMEM + 10 % heat-inactivated FBS
PLASTIC WARES AND EQUIPMENTS
24-well Tissue Culture Plate	Falcon	353047	Sterile
100 mm Tissue Culture Plate	Corning	430167	Sterile
25 cm2 Tissue Culture Flask	Nunc	156340	Sterile
90 mm Bacterial Grade Culture Dish	Miniplast, Ein Shemer, Israel	20090-01-017	Sterile
15 ml Sterile Conical Centrifuge Tube	Miniplast, Ein Shemer, Israel	835015-40-111	Sterile
50 ml Sterile Conical Centrifuge Tube	Miniplast, Ein Shemer, Israel	835050-21-111	Sterile
Falcon 12 x 75 mm Round-Bottom Polystyrene Tube	Becton Dickinson	352058	Sterile
Millicell 24 Migration Plate with a pore size of 5μm	Merck Millipore	PSMT010R1	Sterile
White 96-Flat-Bottom Well Plate	Costar	3917	Sterile
Cell Strainer (40 mm)	BD Falcon	352340	Sterile
20G x 1.5" Needle	BD Microlance 3	301300	Sterile
23G x 1" Needle	BD Microlance 4	300800	Sterile
25G x 5/8" Needle	BD Microlance 5	300600	Sterile
0.3 ml Syringe with a 30G x 8mm Needle	BD Micro-Fine Plus Demi	320829	Sterile
9 mm Clips	BD, AutoClip	427631	Sterile
EasySep Magnet	STEMCELL Technologies	18000
MACS LS Separation Column	Miltenyi Biotech	130-042-201	Sterile
MidiMACS Separator Magnet	Miltenyi Biotech	130-042-302
MACS MultiStand	Miltenyi Biotech	130-042-303
Microscope Glass Slide	Menzel-Gläser Superfrost  Plus Thermo	J1800AMNZ
Orbital Shaker	Sky line, ELMI	S-3.02.10L
Plate Reader	TECAN	InfiniteF200Pro
POWDER
Bovine serum albumin (BSA), fraction V	Sigma	A7906
Bromodeoxyuridine (BrdU)	BD Pharmingen	550891	Sterile
CFSE (5-(and 6-)-Carboxyfluorescein diacetate, succinimidyl ester)	Molecular Probes	C1157
Dextran T500	Sigma	31392
Heparin sodium salt from porcine intestinal mucosa	Sigma	H3149
Sodium azide (NaN3)	Sigma	S8032	Highly toxic, handle with care
Thioglycollate powder	Difco	225650
Zymosan A	Sigma	Z4250
MEDIA AND SUPPLEMENTS
Dulbecco's modified Eagle medium (DMEM)	Sigma	D5796	Sterile
Opti-MEM® I reduced serum medium	Life Technologies	31985062	Sterile
Roswell Park Memorial Institute (RPMI)-1640 medium	Sigma	R8758	Sterile
Foetal bovine serum (FBS), heat-inactivated	Sigma	F9665	Sterile
L-Glutamine	Biological Industries, Beth HaEmek, Israel	03-020-1A	Sterile
Sodium pyruvate	Biological Industries, Beth HaEmek, Israel	03-042-1B	Sterile
Penicillin Streptomycin x 1000 solution	Biological Industries, Beth HaEmek, Israel	03-031-5	Sterile
Phosphate buffered saline (PBS) without Mg2+ and Ca2+	Biological Industries, Beth HaEmek, Israel	02-023-1	Sterile
PBS x 10 without Ca2+ and Mg2+	Biological Industries, Beth HaEmek, Israel	02-023-5A	Sterile
HPLC grade water	J.T. Baker	4218-03	Autoclave
SOLUTIONS
ACK – Ammonium-Chloride-Potassium	Life Technologies	A10492-01
Bromodeoxyuridine (BrdU) solution (10 mg/ml) in PBS			Dissolve 10 mg of BrdU in 1 ml PBS and sterile filter.
CFSE, 5 mM in DMSO			Dissolve 2.8 mg of CFSE in 1 ml DMSO. Divide into 10 ml aliquots in sterile 200 ml tubes and store in the dark at -20oC.
Eosin Y solution	Sigma	HT110-2-32
Hanks' balanced salt solution	Biological Industries, Beth HaEmek, Israel	02-016-1A	Sterile
Heparin, 20 mg/ml in PBS			Dissolve 100 mg Heparin in 5 ml sterile PBS, and sterile filter through a 0.2 mm filter.
Histopaque-1119	Sigma	11191	Sterile filter through a 0.2 mm filter.
Histopaque-1077	Sigma	10771	Sterile filter through a 0.2 mm filter.
Luciferase cell culture lysis buffer x5	Promega	E153A	Dilute 1:5 in sterile water just before use.
Luciferase assay solution	Promega	E1501	Contains luciferase assay substrate powder (E151A) and luciferase assay buffer (E152A)
Mayer's Hematoxylin solution	Sigma	MHS-32
PBS + 0.5% BSA			Dissolve 2.5 g BSA in 500 ml PBS, and sterile filter through a 0.2 mm filter.
PBS + 1% BSA			Dissolve 1g BSA in 100 ml PBS, and sterile filter through a 0.2 mm filter.
5x PBS with 2.5% BSA			Dissolve 12.5g BSA in a mixture of 250 ml sterile HPLC-grade water and 250 ml PBSx10, and sterile filter through a 0.2 mm filter.
PBS containing 0.5% BSA and 2 mM EDTA			Dissolve 250 mg BSA in 50 ml sterile PBS and add 200 ml of 0.5M EDTA pH 8.0, sterile filter through a 0.2 mm filter.
FACS buffer (PBS containing 0.5% BSA, 2 mM EDTA and 0.02% NaN3)			Dissolve 250 mg BSA in 50 ml sterile PBS  and add 200 ml of 0.5M EDTA pH 8.0 and 500 ml of 2% NaN3, sterile filter through a 0.2 mm filter.
Saline (0.9% NaCl)			Dissolve 9 g NaCl in 1,000 ml ddw, autoclave
0.2% NaCl solution			Dissolve 2 g NaCl in 1,000 ml ddw, autoclave
1.6% NaCl solution			Dissolve 16 g NaCl in 1,000 ml ddw, autoclave
2 % Sodium azide			Dissolve 1g sodium azide in 50 ml sterile ddw, keep at 4oC. Highly toxic.
3% Thioglycollate solution			Dissolve 3 g of thioglycollate powder in 100 ml ddw.                                        Boil until solution becomes yellow and autoclave.
Trypan blue solution (0.4%)	Sigma	T8154	Dilute 1:10 in PBS to get a 0.04% solution.
Trypsin solution B	Biological Industries, Beth HaEmek, Israel	03-046-1	Sterile
1 mg/ml Zymosan A			Resuspend 1 mg Zymosan A in 1 ml sterile PBS in an Eppendorf tube. Vortex vigorously and incubate the tube at 37 oC for 30 min. Do not autoclave. Prepare the solution freshly before use.
KITS
EasySep PE selection kit	STEMCELL Technologies	18557
EasySep PE selection cocktail	STEMCELL Technologies	18151
the EasySep magnetic nanoparticles	STEMCELL Technologies	18150
Anti-Ly6G mouse MicroBead Kit	Miltenyi Biotec	130-092-332
EasySep Mouse Neutrophil Enrichment Kit	STEMCELL Technologies	19762
EasySep Human Neutrophil Enrichment Kit	STEMCELL Technologies	19257
FITC BrdU flow kit	BD Pharmingen	559619
MACS Neutrophil isolation kit	Miltenyi Biotec	130-097-658
Phagocytosis Assay Kit	Cayman Chemical Company	500290
ANTIBODIES
FcR blocking antibody	Biolegend	101302
Purified rat anti-Ly6G antibody	BD Pharmingen	551459	Clone 1A8
PE-conjugated rat anti-mouse Ly6G antibody	Biolegend	127608	Clone 1A8
FITC-conjugated rat anti-mouse Ly6G	BD Pharmingen	551460	Clone 1A8
PerCP-Cy5.5 rat anti-mouse Ly6G	TONBO Biosciences	65-1276	Clone 1A8
violetFluor 450-conjugated rat anti-mouse Ly6G	TONBO Biosciences	75-1276	Clone 1A8
FITC-conjugated rat anti-mouse CD11b	BD Pharmingen	553310	Clone M1/70
FITC-conjugated rat anti-mouse Ly-6G and Ly-6C (GR-1)	BD Pharmingen	553127	Clone RB6-8C5
PE-conjugated rat anti-mouse CD45	BD Pharmingen	553081	Clone 30-F11
FITC-conjugated rat anti-mouse F4/80	Abcam	ab60343	Clone BM8
FITC-conjugated mouse anti-human CD66b	Biolegend	305103	Clone G10F5
Purified rat isotype control antibody (IgG2a, k)	BD Pharmingen	553927	Clone R35-95
LEAF purified Armenian hamster anti-mouse CD3e antibody	BioLegend	100314	Clone 145-2C11