Load-tap-changing Transformers
Load-tap-changing Transformers - Related Videos
19:44
A Tactile Automated Passive-Finger Stimulator (TAPS)
0 Views •
Cited by 24 •
2009
We describe a computer-controlled device for investigating the sense of touch: the Tactile Automated Passive-finger Stimulator (TAPS). We describe the components of TAPS, and show how TAPS is used to administer a two-interval forced-choice tactile grating orientation test.
10:50
Single Phase Transformers
0 Views •
2023
Source: Ali Bazzi, Department of Electrical Engineering, University of Connecticut, Storrs, CT. Transformers are stationary electric machines that step up or down AC voltage. They are typically formed of primary and secondary coils or windings, where the voltage on the primary is stepped up or down at the secondary, or the other way around. When a voltage is applied to one of the windings and current flows in that winding, flux is induced in the magnetic core, coupling both windings. With an AC...
10:36
Identifying Protein-protein Interaction in Drosophila Adult Heads by Tandem Affinity Purification (TAP)
0 Views •
Cited by 9 •
2013
Drosophila is famous for its powerful genetic manipulation, but not for its suitability of in-depth biochemical analysis. Here we present a TAP-based procedure to identify interacting partners of any protein of interest from the fly brain. This procedure can potentially lead to new avenues of research.
04:33
Bacterial Transformation - Concepts
0 Views •
2019
Background In early 20th century, pneumonia was accountable for a large portion of infectious disease deaths1. In order to develop an effective vaccine against pneumonia, Frederick Griffith set out to study two different strains of the Streptococcus pneumoniae: a non-virulent strain with a rough appearance (R-strain) and a virulent strain with a smooth appearance (S-strain) due to an outer polysaccharide capsule2. This outer layer of the S-strain bacteria enabled them to withstand the host...
12:19
Bacterial Transformation: Electroporation
0 Views •
2023
The term “transformation” refers cellular ingestion of foreign DNA. In nature, transformation can occur in certain types of bacteria. In molecular biology, however, transformation is artificially induced through the creation of pores in the bacterial cell walls. Bacterial cells that are able to take up DNA from the environment are called competent cells. Electrocompetent cells can be produced in the laboratory and transformation of these cells can be achieve via the application of an...
FAQs
The transformer changes its effective turns ratio by selecting a different connection on the winding. Because the network remains energized, switching and transition components manage the transfer from one tap to another. Their role is to move between winding connections while carrying current, preventing an interruption and avoiding damaging short circuits during voltage adjustment.
These components coordinate the change between adjacent winding taps while the transformer remains connected to the electrical network. They allow current to transfer through the changing connection rather than being abruptly interrupted. This controlled transition is essential because an uncontrolled change could create damaging short circuits, undermine reliable voltage regulation, or interrupt service to connected loads.
Changing demand and broader system conditions determine when voltage adjustment is needed. As load or supply conditions fluctuate, the transformer can select a winding connection that changes its turns ratio and supports the required voltage. This adaptability helps compensate for variation across transmission and distribution networks, contributing to steadier service and improved power quality.
By adapting the winding connection as electrical conditions change, a Load-tap-changing Transformer helps maintain voltage closer to the desired operating level while supplying an energized network. More consistent voltage supports power quality, and continued regulation during changing demand or supply conditions contributes to network stability. These benefits are especially important where service cannot be interrupted.
The operating sequence consists of selecting a different winding connection, using switching and transition components to transfer between taps, and maintaining current flow throughout the change. The transition must avoid both service interruption and damaging short circuits. This sequence enables voltage regulation while the transformer remains connected to the energized transmission, distribution, or facility network.
Engineers use these transformers in substations and industrial facilities where continuous operation and dependable voltage regulation are important. They can serve transmission and distribution systems that experience changing demand or supply conditions. Their ability to adjust voltage without disconnecting the network makes them suitable for infrastructure in which interruption would compromise service continuity or operating performance.
Relevant outcomes include the ability to maintain stable service as demand changes, compensate for fluctuations in load and supply, and improve power quality. Engineers can also consider the contribution to network stability and continuous operation. These outcomes connect the tap-changing function to practical performance in substations, transmission and distribution systems, and industrial electrical facilities.