Name: measuring analyte concentration
Uploaded: 2024-12-05T18:31:54.000Z
Duration: 1 min 12 s
Channel: JoVE

K12 Standards

Virginia  Standards of Learning

HIgh School

Physics

PH.1

PH.1.d

Quantitative Analysis

Kantitatif analiz, bileşimi sıklıkla bilinen bir numunenin bir veya daha fazla bileşeninin miktarını belirler. Aksi takdirde, bileşenlerini belirlemek için bir ön nitel analiz yapılır.
Kantitatif analizde sonuç, numunenin miktar tayini ve analitle ilgili bir miktarın orantılı olarak ölçülmesi olmak üzere iki ölçümden tahmin edilir.
Kantitatif analiz, klasik ve enstrümantal yöntemler olarak sınıflandırılabilir.
Klasik yöntemler, bir reaktif ile kimyasal reaksiyon yoluyla elde edilen analitin veya türevinin kütlesini veya hacmini değerlendirir. Buna karşılık, enstrümantal yöntemler, analitin elektromanyetik radyasyon ile etkileşiminde fiziksel doğasını araştırır.
Kantitatif analiz için farklı numuneler ve cihazlar kullanıldığından, dedektörlerin kalibrasyonu gereklidir. Daha sonra, aynı analitin bilinen farklı miktarlarını içeren küvetler kullanılarak bir kalibrasyon grafiği oluşturulur ve bu daha sonra numunedeki bilinmeyen analit konsantrasyonunun belirlenmesine yardımcı olur.

kantitatif analiz

Kantitatif analiz, bir numunedeki belirli bileşenlerin miktarını ölçmek için kullanılan bir tekniktir. Numunenin bileşimi bilinmediğinde, bileşenlerini belirlemek için önce kalitatif analiz yapılır ve bu analiz, bileşenlerin belirlenmesini sağlar. Bu da kantitatif analiz aşamasında, doğru maddelerin ölçülmesini sağlar.

Kantitatif analizde, iki temel ölçüm yapılır. Bunlar, numune miktarı ve analitin (analiz edilen madde) miktarına orantılı bir özelliktir. Bu, yöntemin temelini oluşturur ve analitin konsantrasyon miktarının doğru bir şekilde belirlenmesini sağlar.

Kantitatif analiz, iki ana türe ayrılabilir. Bunlar, klasik yöntemler ve enstrümantal yöntemlerdir. Klasik yöntemler, analitin veya kimyasal olarak türevlendirilmiş formunun kütlesini veya hacmini ölçmeyi içermektedir. Örneğin, gravimetrik analiz, konsantrasyonunu belirlemek için analit ile kimyasal reaksiyondan oluşan bir çökeltinin kütlesini ölçer. Başka bir klasik yöntem, analit ile tamamen reaksiyona girmesi için gereken bir reaktanın hacminin ölçüldüğü titrasyondur.

Enstrümantal yöntemler, analit ile elektromanyetik radyasyon gibi fiziksel kuvvetler arasındaki etkileşimi değerlendirir. Örneğin, spektrofotometride, analitin konsantrasyonu, örneğin numune tarafından absorblanan ışık miktarının ölçülmesiyle belirlenir. Başka bir örnek ise atomik absorpsiyon spektroskopisidir. Bu yöntemde, örnekteki atomlar tarafından absorblanan ışık miktarı, analitin konsantrasyonu hakkında bilgi sağlar.

Kalibrasyon eğrileri, kantitatif analizde önemli bir rol oynar. Dedektörler ve cihazlar, genellikle küvetlere yerleştirilen bilinen analit konsantrasyonları kullanılarak kalibre edilmelidir. Bu bilinen değerler, bir kalibrasyon grafiği oluşturmak için kullanılır. Bu önemli araç, numunedeki bilinmeyen analitin konsantrasyonunu belirlemeye yardımcı olarak analizin doğruluğunu sağlar.

Özetle, kantitatif analiz önemli bir bilimsel süreçtir. Bu süreç, analitin tanımlanması, numuneyi ve analit özelliklerini ölçülmesi ve kullanılan yöntemkerin sınıflandırılması gibi birkaç temel adım içerir. Süreç, numunedeki bilinmeyen analitin konsantrasyonunu belirlemede önemli bir araç olan kalibrasyon eğrileri aracılığıyla doğruluğu sağlar.

Kantitatif analiz

Kantitatif analiz, bir numunedeki belirli bileşenlerin miktarını ölçmek için kullanılan bir tekniktir. Numunenin bileşimi bilinmediğinde, ...

Education

JoVE Core

Analytical Chemistry

Analitik Kimya

Unit 1

Ünite 1

Method Development and Sampling Techniques

Yöntem Geliştirme ve Örnekleme Teknikleri

method-development-and-sampling-techniques

KEY TERMS AND CONCEPTS

TEMEL TERİMLER VE KAVRAMLAR

measuring analyte concentration

Quantitative analysis measures the amount of a specific substance, called the analyte, in a sample. If the sample composition is unknown, qualitative analysis comes first. That step identifies the components so the correct substances can be measured during the quantitative phase.

This method depends on two key measurements. Scientists measure the sample quantity and also a property that is proportional to the amount of analyte. Together, these measurements help determine the analyte concentration accurately.

Quantitative analysis is usually grouped into classical methods and instrumental methods. Classical methods measure mass or volume, either of the analyte itself or of a chemically derived form. Gravimetric analysis is one example. It measures the mass of a precipitate formed in a chemical reaction with the analyte. Titration is another classical method. It measures the volume of a reactant needed to fully react with the analyte.

Instrumental methods use the analyte’s interaction with physical forces, such as electromagnetic radiation. In spectrophotometry, concentration is found by measuring how much light the sample absorbs. Atomic absorption spectroscopy uses the amount of light absorbed by atoms in the sample to show the analyte concentration.

Calibration curves are a major part of quantitative analysis. Detectors and instruments are calibrated with known concentrations of the analyte, often placed in cuvettes. These known values are used to make a calibration plot. The plot helps scientists find the concentration of the unknown analyte in the sample and improves the accuracy of the analysis.

Measuring Analyte Concentration

development of analytical methods

Analytical Methods: Technique to Protocol

Analytical methods follow a clear path from technique to protocol. In analytical chemistry, a technique is the scientific principle used to explain a chemical measurement. A method applies that technique to a sample of interest. The next steps are procedure and protocol. A procedure gives the directions for carrying out the analysis with an analytical method. A protocol is the detailed set of guidelines for that procedure, and it should be followed closely to get the desired results. <br...

quality control

Quality Control Charts and Lab Records

Quality control charts, proficiency testing, and lab records are key parts of quality control in a laboratory. These steps help keep a system under statistical control. They also help track data, show trends, and spot variations that may affect the accuracy of an analysis. One common tool is a quality control chart. This chart plots one or more analytical characteristics over time. The measured values are taken at different times during the analysis and compared with the known value of...

quality assurance

Quality Checks in Analytical Testing

Quality assurance in analytical testing brings together the checks that help a system perform properly. It includes quality control, quality assessment, and internal corrective measures. These parts work in a cycle to support reliable results. Quality control happens before and during the analysis. Quality assessment takes place during and after the investigation. Internal corrective measures are then based on the results of post-analysis quality assessment, or they may be applied before a new...

data validation

How Analytical Methods Are Checked

Method validation checks whether an analytical chemistry method gives reliable results. It is especially important when the same method is used with different sample matrices or when the procedure is changed. Validation helps show that the method still meets acceptable standards in each case. Several key checks are used in method validation. Specificity means the method can measure the target analyte without interference from other substances. Linearity means the result changes in direct...

qualitative analysis

Classical and Instrumental Sample ID

Qualitative analysis identifies the elements, ions, or compounds in an unknown sample. It is the first step in the hierarchy of analytical goals. That makes it the starting point for scientific study before quantitative analysis or other forms of analysis. Two main approaches are used in qualitative analysis: classical methods and instrumental methods. Classical methods depend on the visible or sensory result of a chemical reaction, such as a color change, a precipitate, or even a smell. These...

quantitative analysis

Quantitative analysis measures the amount of a specific substance, called the analyte, in a sample. If the sample composition is unknown, qualitative analysis comes first. That step identifies the components so the correct substances can be measured during the quantitative phase. This method depends on two key measurements. Scientists measure the sample quantity and also a property that is proportional to the amount of analyte. Together, these measurements help determine the analyte...

instrument calibration

Calibrating Lab Instruments for Accurate Results

Calibration helps lab instruments produce accurate and consistent results. It is important in manufacturing, healthcare, testing laboratories, and scientific research. Each instrument needs a calibration process that matches its design and function. This process improves data accuracy and helps results stay reliable. An analytical balance measures mass and needs regular calibration to stay precise. It is calibrated by comparing its readings with known standard weights. These weights act as...

glassware calibration

Calibrating Lab Glassware for Accurate Volume

Calibrating lab glassware helps students measure liquids accurately in the analytical laboratory. It reduces volume errors and supports consistent results across measurements. This matters when using volumetric flasks, pipettes, burettes, and other tools that depend on precise volume readings. Volumetric flasks are used to prepare aqueous solutions with a precise final volume. They have a calibration line on the neck. To calibrate one, fill it with distilled water until the meniscus, the...

standard solutions

Preparing Standard Solutions in the Lab

Standard solutions are prepared to have a precisely known concentration or composition. In analytical chemistry, this accuracy is important because it supports reliable results. A primary standard is a highly pure, stable substance with a high molar mass. It is fully soluble in water, which is the most commonly used solvent in analytical chemistry. A primary standard solution can be used to standardize a secondary standard. Secondary standards have known concentrations, but they are usually...

blank solutions

Blank Solutions in Analytical Testing

Blank solutions are used in analytical testing to show the background signal before a sample is measured. A blank solution does not contain the analyte, which is the substance of interest being tested or measured. It is usually made with the same reagents and procedure as the sample solution, but without the analyte. The main purpose of a blank solution is to control for background interference and contamination. Reagents, solvents, or lab equipment can sometimes create a detectable signal on...

sampling methods: overview

How Sampling Shapes Lab Results

Sampling shapes lab results by determining how a smaller sample represents a larger population. In analytical chemistry, testing an entire population is often impractical or impossible, so samples are collected to make inferences about the whole group. The sampling method is the process used to choose individuals or items for that sample. Common sampling methods include random, judgemental, systematic, stratified, and cluster sampling. Each method can affect the quality of the data in a...

sampling methods: sample types

Sampling Materials in Solid, Liquid, Gas

Sampling materials are grouped as solid, liquid, or gas. The type of sample helps decide the right collection method. Solid samples can include sediments from water bodies, soil, metals, and biological tissues. Sediment sampling from water bodies can be done in two common ways. Grab sampling uses a device to collect a discrete sample from the bottom with minimal disturbance. These samples may not show the full area because conditions can vary from place to place. Piston coring collects a...

sampling plans

Choosing Samples for Reliable Results

Sampling is a key step in analytical chemistry. It helps researchers collect data that represents a larger population. The main sampling methods in this topic are random, judgmental, systematic, stratified, and cluster sampling. Random sampling gives each member of the population an equal chance of being chosen. Researchers often use a random number generator or a lottery-style method. For example, a polymer sheet can be divided into 1 cm x 1 cm sections, and 10 sections can be selected at...

sample preparation for analysis: overview

Preparing Samples by State and Form

Sample preparation depends on the state and form of the sample before analysis. It helps make the sample ready for accurate measurement. The main goal is to extract the analyte, which is the substance being measured, and remove parts that could interfere with the analysis. Solid samples often need the most handling. Large solids are usually ground, crushed, or milled to make them smaller and increase surface area. The sample is then sieved and mixed so it has a uniform composition. After that,...

sample preparation for analysis: advanced techniques

sample-preparation-for-analysis-advanced-techniques

Preparing Complex Samples for Analysis

Preparing complex samples for analysis often requires special digestion and fusion methods. Samples with inorganic or organic material can be hard to dissolve or break down. Common sample preparation methods include acid digestion, fusion, dry ashing, and wet digestion. These steps help turn difficult samples into forms that can be tested reliably and again with similar results. Acid digestion is often used for inorganic materials that do not dissolve in water. It is useful for soil and...

sample handling

Sample Transport and Storage Basics

Sample transport and storage help keep specimens intact before testing. Moving a sample from the collection point to the laboratory requires careful handling. The sample should be sealed well and clearly labeled. These steps help prevent cross-contamination and support reliable results. Temperature control is also important during transport. Some samples travel in insulated containers, cool packs, or refrigerated vehicles so they stay within the needed temperature range. After the samples...

contaminants and errors

Sampling Errors in Sample Preparation

Sampling errors in sample preparation can affect the accuracy of laboratory results. Two common problems are concentration bias from poor sample splitting and contamination from reducing particle size by grinding or homogenization. Recognizing these errors helps make analysis more reliable. The number of samples also matters when a target population follows a normal distribution. In that case, the sample size ns can be found with a formula that uses the t-value for the chosen confidence level,...

key terms and concepts

Explore how quantitative analysis measures analyte concentration using classical and instrumental methods, including titration, spectrophotometry, and calibration curves.

Measuring Analyte Concentration | JoVE K12

JoVE Core Analitik Kimya, karmaşık kimyasal prensiplerini anlaşılır, ilgi çekici animasyonlara dönüştürerek basitleştirir ve SI Birimlerinden NMR spektroskopisine kadar konuları daha erişilebilir ve anlaşılır hale getirir. Buna ek olarak, bilim insanlarının yer aldığı videolar, bu kavramların dünya çapındaki laboratuvarlarda yürütülen gerçek dünya araştırmalarındaki uygulamalarını gösterir.

analytical chemistry

Texas Essential Knowledge and Skills

High School

Biology

BIO.2

BIO.2.C

PHYS.1

PHYS.1.E

PHYS.2

PHYS.2.C

Chemistry and Physics

IPC.1

IPC.1.E

IPC.2

IPC.2.C

Scientific Method

The scientific method is used to solve problems and explain phenomena. The development of the scientific method coincided with changes in philosophy ...

Observational Studies

Observational studies are a type of analytical study where researchers observe events without any interventions. In other words, the researcher does not ...

Unusual Results

Unusual results are those that have a very low chance of occurring. Unusual results can be identified using probabilities and the range rule of thumb. In ...

Expected Value

The expected value is known as the &#34;long-term&#34; average or mean. This means that over the long term of experimenting over and over, you would ...

What is a Hypothesis?

A hypothesis can be a simple sentence or statement about a property or any phenomenon observed or predicted for a population. It is usually a claim about ...

Null and Alternative Hypotheses

The actual hypothesis testing begins by considering two hypotheses. They are termed&#160; the null hypothesis and the alternative hypothesis. These ...

Types of Hypothesis Testing

There are three types of hypothesis tests: right-tailed, left-tailed, and two-tailed.
When the null and alternative hypotheses are stated, it is observed ...

Introduction to Test of Independence

In statistics, the term independence means that one can directly obtain the probability of any event involving both variables by multiplying their ...

Hypothesis Test for Test of Independence

The test of independence is a chi-square-based test used to determine whether two variables or factors are independent or dependent. This hypothesis test ...

Decision Making: P-value Method

The process of hypothesis testing based on the P-value method includes calculating the P- value using the sample data and interpreting it.
First, a ...

Decision Making: Traditional Method

The process of hypothesis testing based on the traditional method includes calculating the critical value, testing the value of the test statistic using ...

empirical-method-to-interpret-standard-deviation

Empirical Method to Interpret Standard Deviation

The empirical rule, also known as the three-sigma rule, allows a statistician to interpret the standard deviation in a normally distributed dataset. The ...

Data Collection by Experiments

Data collection is a systematic method of obtaining, observing, measuring, and analyzing accurate information. An experimental study is a standard method ...

Solving Problems in Physics

Problem-solving is the ability to apply general physical principles to specific situations, usually expressed by equations. It is an essential skill in ...

The student will demonstrate an understanding of scientific and engineering practices by. asking questions and defining problems
• ask questions that arise from careful observation of phenomena, examination of a model or theory, unexpected results, and/or to seek additional information
• determine which questions can be investigated within the scope of the school laboratory
• make hypotheses that specify what happens to a dependent variable when an independent variable is manipulated
• generate hypotheses based on research and scientific principles
• define design problems that involves the development of a process or system with interacting components and criteria and constraints

PH.1.a

What is an Experiment?

An experiment is a planned activity carried out under controlled conditions. The purpose of an experiment is to investigate the relationship between two ...

Study Design in Statistics

A study design is a set of techniques that allow a researcher to collect and analyze data from different variables defined for a specific research ...

Experimental Designs

An experimental design is a systematic process that allows researchers to evaluate the relationship between dependent and independent variables. There are ...

Randomized Experiments

The randomization process involves assigning study participants randomly to experimental or control groups based on their probability of being equally ...

Crossover Experiments

Crossover experiments, also called the repeated-measurements design, is a study design in which all experimental units are exposed to all treatments in ...

Controls in Experiments

When conducting an experiment, it is crucial to have control to reduce bias and accurately measure the dependent variables. It also marks the results more ...

Bias

Bias refers to any tendency that prevents a question from being considered unprejudiced. In research, bias occurs when one outcome or answer is selected ...

Blinding

Blinding is a commonly used method of not telling participants which treatment a subject is receiving. Blinding is a critical part of a randomized control ...

Clinical Trials

Clinical trials are prospective experimental studies conducted on humans to determine the safety and efficacy of treatments, drugs, diet methods, and ...

Data Collection by Observations

Data collection refers to a systematic way of obtaining, observing, measuring, and analyzing accurate information. Observational studies are one of the ...

Data Collection by Survey

The systematic method of obtaining and analyzing accurate information of a population is called data collection. A survey is a standard method of data ...

Units and Standards of Measurement

A physical quantity is defined either by specifying its measurement method or by stating how it is calculated from other measurements. For example, ...

Estimation of the Physical Quantities

On many occasions, physicists, other scientists, and engineers need to make estimates of a particular quantity. These are sometimes referred to as ...

/files/media/science-education/science-education-thumbs/14734.jpg

Base Quantities and Derived Quantities

In any system of units, the units for some physical quantities must be specified through a measurement process. These measurements are the base quantities ...

Conversion of Units

Sometimes, there is a need to convert from one unit to another one. For instance, reading a cookbook in which quantities are expressed in units of liters ...

The student will demonstrate an understanding of scientific and engineering practices by. planning and carrying out investigations
• individually and collaboratively plan and conduct observational and experimental investigations
• plan and conduct investigations or test design solutions in a safe manner
• select and use appropriate tools and technology to collect, record, analyze, and evaluate data

PH.1.b

Review and Preview

Data are individual items of information obtained from a population or sample. Data may be classified as qualitative (categorical), quantitative ...

What is a Frequency Distribution

A frequency is the number of times a value of the data occurs. The sum of all the frequency values represents the total number of students included in the ...

Ogive Graph

An ogive graph is sometimes called a cumulative frequency polygon. It is one type of frequency polygon that shows cumulative frequency. In other words, ...

Histogram

The histogram is a graphical representation in the x-y form of data distribution in a data set. The horizontal x-axis is labeled with what the data ...

Relative Frequency Histogram

The relative frequency depicts the proportion of data points that have each value. The frequency tells the number of data points that have each value. ...

Scatter Plot

The most common and easiest way to display the relationship between two variables, x and y, is a scatter plot. A scatter plot shows the direction of a ...

Time-Series Graph

A time-series graph is a line graph with repeated measurements taken at successive intervals of time. It is also called a time series chart. To construct ...

Bar Graph

A bar graph is also called a bar chart and consists of bars that are separated from each other. It either uses horizontal or vertical bars to show ...

Multiple Bar Graph

As the name suggests, a multiple bar graph is the same as a bar graph but has multiple bars to depict relationships between different data values. One can ...

Pareto Chart

A Pareto chart is a bar graph or a combination of both line and bar graphs. The bar lengths represent the individual values or the frequency, while the ...

Pie Chart

A pie chart (or a pie graph) is a circular graphical chart or a pictorial representation of categorical data. It is divided into slices of pie each ...

What is Central Tendency?

Descriptive statistics describe or summarize relevant characteristics of a sample and aid in the analysis of data of interest. When analyzing large ...

What is Variation?

Apart from the measures of central tendency, distribution, outliers, and the changing characteristics of data with time, an important characteristic of ...

Range

The range is one of the measures of variation. It can be defined as the difference between a dataset&#39;s highest and lowest values. For example, in the ...

Standard Deviation

The most commonly used measure of variation is the standard deviation. It is a numerical value measuring how far data values are from their mean. The ...

Calculating Standard Deviation

The standard deviation is the most common measure of variation. It is a value that tells us how far a data value is from the mean value in a dataset. ...

Variance

&#160;The deviations show how spread out the data are about the mean. A positive deviation occurs when the data value exceeds the mean, whereas a negative ...

Coefficient of Variation

The coefficient of variation measures the dispersion of the data points or distribution around the mean. Using the coefficient of variation, we can ...

Contingency Table

A contingency table provides a way of portraying data that can facilitate calculating probabilities. It is a method of displaying a frequency distribution ...

Statistical Analysis: Overview

An analysis is usually conducted by replicated sampling or repeated measurements on the same sample. This leads to scattered results rather than a single ...

The student will demonstrate an understanding of scientific and engineering practices by. interpreting, analyzing, and evaluating data
• record and present data in an organized format that communicates relationships and quantities in appropriate mathematical or algebraic forms
• use data in building and revising models, supporting an explanation for phenomena, or testing solutions to problems
• analyze data using tools, technologies, and/or models (e.g., computational, mathematical, statistical) in order to make valid and reliable scientific claims or determine an optimal design solution
• analyze data graphically and use graphs to make predictions
• consider limitations of data analysis when analyzing and interpreting data
• evaluate the effects of new data on a working explanation and/or model of a proposed process or system
• analyze data to optimize a design

PH.1.c

The student will demonstrate an understanding of scientific and engineering practices by.

Measuring Analyte Concentration

Description

Transcript

Tags

More videos by Standards