Thermometer Cleaning Protocol
Thermometer Cleaning Protocol - Related Videos
08:44
Fabrication and Testing of Photonic Thermometers
0 Views •
Cited by 1 •
2018
We describe the process of fabrication and testing of photonic thermometers.
07:30
Cleaning Glassware
0 Views •
2023
Source: Vy M. Dong and Daniel Kim, Department of Chemistry, University of California, Irvine, CA Organic synthesis is about transforming a readily available reagent into a more valuable product. Having clean glassware is crucial for the efficiency of this process. Dirty glassware can potentially affect the reaction and make isolation of the final product more challenging. Thus, a synthetic chemist must keep the glassware spotless. The methods described here will detail different glass cleaning...
01:22
Thermometers and Temperature Scales
0 Views •
2023
Any physical property that depends consistently and reproducibly on temperature can be used as the basis of a thermometer. For example, volume increases with temperature for most substances. This property is the basis for the common alcohol thermometer and the original mercury thermometers. Other properties used to measure temperature include electrical resistance, color, and the emission of infrared radiation. As many physical properties depend on temperature, the variety of thermometers is...
01:22
Gas Thermometers and the Kelvin Scale
0 Views •
2023
The definition of temperature in terms of molecular motion suggests that there should be a lowest possible temperature, where the average kinetic energy of molecules is zero (or the minimum allowed by quantum mechanics). Experiments confirm the existence of such a temperature, called absolute zero. An absolute temperature scale is one whose zero point is absolute zero. Such scales are convenient in science because several physical quantities, such as the volume of an ideal gas, are directly...
04:57
Proper Care and Cleaning of the Microscope
0 Views •
Cited by 2 •
2008
Keeping the microscope optics clean is important for high-quality imaging. Dust, fingerprints, excess immersion oil, or mounting medium on or in a microscope causes reduction in contrast and resolution. DIC is especially sensitive to contamination and scratches on the lens surfaces. This protocol details the procedure for keeping the microscope clean.
FAQs
Contact time gives the disinfectant the period specified by its product instructions to act on contamination. Wiping the thermometer and immediately removing the product may not satisfy that requirement. Staff should therefore keep the surface exposed for the prescribed duration, while following device and product guidance, to support consistent microbial transmission control during repeated clinical use.
Manufacturer instructions determine which cleaning or disinfecting products are compatible with a particular thermometer and how the device should be handled. This is especially important for reusable electronic models, because unsuitable products or excess liquid may damage components. Following the device-specific guidance helps balance infection prevention with preservation of function and measurement accuracy.
Residue from a detergent or disinfectant can remain on the thermometer if rinsing is required but omitted, while storing the device before it dries can leave unwanted moisture. These conditions may contribute to damage or interfere with reliable use. Completing the specified rinsing and drying steps helps protect the device and supports consistent temperature measurement.
Staff should first identify the thermometer’s manufacturer requirements and confirm that the proposed detergent or disinfectant is compatible with the device. They should also check whether the product requires rinsing and a defined contact time. This verification is particularly important before routine reuse, because product selection must address contamination control without compromising the thermometer’s components or accuracy.
Electronic components should not be exposed to excess liquid during cleaning. Staff should apply the compatible product in a manner consistent with the manufacturer’s instructions, then complete any required rinsing and allow the thermometer to dry before storage or reuse. This handling reduces the risk of device damage while maintaining the cleaning process needed for clinical care.
The protocol applies to reusable oral, axillary, tympanic, and other clinical thermometers. Although the same infection-prevention objective applies across these devices, cleaning products and handling conditions should still follow each manufacturer’s instructions. Using that device-specific guidance allows the protocol to remain suitable across thermometer types while supporting patient and healthcare-worker protection.