Question 1

What is the mobile phase in column chromatography?

Accepted Answer

The mobile phase is the combined solvent and sample mixture that flows through the column. It carries the dissolved compounds through the stationary phase, allowing separation based on how strongly each molecule interacts with the adsorbent. The solvent used is typically an organic solvent selected based on the polarity of compounds being purified.

Question 2

Why do different compounds elute at different times in column chromatography?

Accepted Answer

Compounds elute at different rates because they interact differently with the stationary phase. Molecules that bind weakly to the adsorbent exit the column quickly, while those with strong interactions elute more slowly. This differential adsorption, based on chemical properties and polarity, enables separation of the mixture into pure fractions.

Question 3

What are the most common stationary phases used in column chromatography?

Accepted Answer

Silica gel and alumina are the two most commonly used stationary phases. Both are highly polar adsorbents that interact strongly with polar compounds and solvents, but weakly with nonpolar molecules. These materials are packed into the column as a slurry and must be properly compacted to ensure homogeneous packing without air bubbles or dry patches.

Question 4

How do you prepare the stationary phase before starting column chromatography?

Accepted Answer

The stationary phase is prepared by mixing the adsorbent powder with solvent to create a slurry that is translucent and moves freely. This slurry is poured into the column and packed by flowing solvent through it. Proper packing ensures the stationary phase is homogeneous from top to bottom with no air bubbles, which is critical for effective separation.

Question 5

What role does solvent polarity play in selecting the mobile phase?

Accepted Answer

Solvent polarity determines which compounds will elute from the column. Nonpolar solvents only elute nonpolar compounds, while polar solvents elute both polar and nonpolar compounds. For mixtures with significantly different polarities, a series of increasingly polar solvents may be used sequentially to elute all compounds of interest.

Question 6

How is thin layer chromatography used to prepare for column chromatography?

Accepted Answer

Thin layer chromatography is used as pre-screening to determine the appropriate solvent and predict separation success. The Rf value should be between 0.2 and 0.3 to ensure good separation. This information helps determine the amount of silica gel needed and guides the selection of the mobile phase solvent for the column.

Question 7

What happens after fractions are collected in column chromatography?

Accepted Answer

Pure fractions are combined in a pre-weighed flask, and the solvent is removed using rotary evaporation to yield the isolated dry compound. The flask is then weighed to determine the mass of purified product. The purity of isolated compounds can be confirmed using analytical techniques such as nuclear magnetic resonance spectroscopy.

Column Chromatography - Assessment Quiz