Name: Rapid Homogeneous Detection of Biological Assays Using Magnetic Modulation Biosensing System (Video) | JoVE Journal
Uploaded: 2010-06-13T17:00:00.000+00:00
Duration: 6 min 58 s
Description: Learn rapid homogeneous detection of biological molecules using magnetic modulation biosensing (MMB). This method detects IL-8 via sandwich immunoassay with magnetic beads and fluorescent labeling, eliminating washing steps.

ai_agent_IP

ai_agent

maintenance

instantTrialDurationMinutes

isBiopharma

enableNewMyJoveSectionDesign

educationFeatures

seoMetaApi

ai_copilot_institution_blacklist

ai_chat_institution_blacklist

freeAccessWindow

ssoRoleCapture

scheduledMaintenanceBanner

joveLabsFeatures

disable_autoplay_for_bots

extended_trial_duration

5 minutes

playerTrialDesktop

This work was partly supported by the Ishaya Horowitz Fund.

IL-8 assay:
<ol>
 <li>The reaction mixture included the following four components in 100 μl final volume of assay buffer in their respective concentrations. 10 μl of magnetic beads with capture antibody at 100 beads/μl final concentrations, 2 μl of biotinylated IL-8 antibody at 1 nano-gram/μl final concentration, 1 μl of streptavidin fluorescent protein at 20 nano-gram/μl final concentration, and 1 μl of IL-8 target at 0.48 pico-gram/μl. The components are added one by one to the assay buffer and are then shaken for 30 minutes. </li>
 <li>A control reaction is prepared the same way without the IL-8 target. </li>
 <li>The reactions are later placed without any separation or washing step in the cuvettes and inspected using the MMB system.</li>
</ol>
MMB system:
<ol>
 <li>Place the cuvette in its position between the two electromagnetic poles.</li>
 <li>Operate the modulation current and wait 30 seconds to allow aggregation and condensation of the beads</li>
 <li>Measure the signal of the lock-in amplifier using an oscilloscope. </li>
</ol>
Representative Results:
Visual inspection of the aggregated beads presented a distinct difference between the reaction with the target and the reaction without the target. In all the reactions with the target, the beads formed a single, dense aggregate that moved in and out the laser beam in a unite manner. However, in all the reaction without the target, the beads were less aggregated and their motion was less unite (see Figure 1).
<img src="/files/ftp_upload/1935/1935fig1.jpg" alt="Spectroscopy analysis; transient absorption spectra illustrating molecular excitation, experiment results." data-altupdatedat="1788235205000" data-alt="Figure 1"> Figure 1: visual inspection of the sandwich' immunoassay (a) without the target IL-8 (b) With the target IL-8.
The pole modulation clock (yellow) and the PMT output signal (magenta) while detecting 0.48 pico-gram IL-8 target are presented in Figure 1(a). The modulation frequency for each pole is at 2 Hz. However, as it was theoretically expected, when the beads pass the laser beam, the PMT detects the fluorescent light and there is a peak in the PMT output voltage. Therefore, the demodulation frequency is at 4 Hz. When the PMT signal and the doubled-modulation clock (at 4 Hz) are fed to the lock in amplifier, the sensitive phase detector detects the synchronization and results with high voltage (see Figure 2).
<img src="/files/ftp_upload/1935/1935fig2.jpg" alt="Pole modulation clock and PMT signal, lock-in amplifier voltage, graph, time vs voltage analysis." data-altupdatedat="1788235205000" data-alt="Figure 2"> Figure 2: (a) the modulation clock (yellow) and the PMT signal (magenta) when detection 0.48 pico-gram IL-8 target. (b) The resulted lock in amplifier voltage at two different scans.
The lock in amplifier didn't detect any signal when the control sample was tested. This fact, together with the visual difference in aggregation suggests that the MMB system can clearly identify the presence of IL-8 target.

<ol><li>Danielli, A., Arie, A., Porat, N., Ehrlich, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Detection+of+fluorescent-labeled+probes+at+sub-picomolar+concentrations+by+magnetic+modulation%5BTitle%5D)+AND+%22Optics+Express%22%5BJournal%5D)">Detection of fluorescent-labeled probes at sub-picomolar concentrations by magnetic modulation.</a> Optics Express. 16, 19253-19259 (2008).</li>
<li>Danielli, A., Porat, N., Arie, A., Ehrlich, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Rapid+homogenous+detection+of+the+Ibaraki+virus+NS3+cDNA+at+pico-molar+concentrations+by+magnetic+modulation%5BTitle%5D)+AND+%22Biosensors+and+Bioelectronics%22%5BJournal%5D)">Rapid homogenous detection of the Ibaraki virus NS3 cDNA at pico-molar concentrations by magnetic modulation.</a> Biosensors and Bioelectronics. 25, 858-863 (2009).</li>
<li><a target="_blank" href="http://scholar.google.com/scholar?hl=en&safe=off&q=%22Bio-Rad+%22Human+angiogenesis+assay+panel%22%22">Bio-Rad "Human angiogenesis assay panel"</a>. , Bio-Plex Pro. Forthcoming.</li>
<li>Instruction Manual. <a target="_blank" href="http://scholar.google.com/scholar?hl=en&safe=off&q=%22Bio-Plex+Precision+Pro+Cytokine+Assay%22">Bio-Plex Precision Pro Cytokine Assay</a>. , Bio-Rad Laboratories. Hercules, CA. Forthcoming.</li>
</ol>

In summary, we showed that the MMB system can be used to detect the presence of IL-8 target at low concentrations (0.5 pico-gram is the detection limit of the Bio-Plex Precision Pro cytokine assays [3,4]). The ability of the system is not limited to IL-8 and can be used to detect other proteins. The advantages of the MMB system are the ability to detect the target rapidly and without any separation or washing step. Thus, it facilitates the detection process and allows the system to be used in field applications.

<table><tbody><tr><td>Bio-Plex Pro Human Cytokine IL-8 set</td><td>Bio-Rad</td><td>171-B5008M</td><td></td></tr><tr><td>Recombinant human IL-8 target</td><td>Thermo Fisher Scientific, Inc.</td><td>R202625</td><td></td></tr><tr><td>Biotinylated monoclonal mouse anti human IL-8 antibody G265-8</td><td>BD Biosciences</td><td>554718</td><td></td></tr><tr><td>Streptavidin coupled fluorescent protein</td><td>Bio-Rad</td><td>Streptavidin PE</td><td></td></tr></tbody></table>

rapid homogeneous detection of biological assays using magnetic modulation biosensing system

Rapid Homogeneous Detection of Biological Assays Using Magnetic Modulation Biosensing System

A magnetic modulation biosensing system (MMB) [1,2] rapidly and homogeneously detected biological targets at low concentrations without any washing or separation step. When the IL-8 target was present, a 'sandwich'-based assay attached magnetic beads with IL-8 capture antibody to streptavidin coupled fluorescent protein via the IL-8 target and a biotinylated IL-8 antibody. The magnetic beads are maneuvered into oscillatory motion by applying an alternating magnetic field gradient through two electromagnetic poles. The fluorescent proteins, which are attached to the magnetic beads are condensed into the detection area and their movement in and out of an orthogonal laser beam produces a periodic fluorescent signal that is demodulated using synchronous detection. The magnetic modulation biosensing system was previously used to detect the coding sequences of the non-structural Ibaraki virus protein 3 (NS3) complementary DNA (cDNA) [2]. The techniques that are demonstrated in this work for external manipulation and condensation of particles may be used for other applications, e.g. delivery of magnetically-coupled drugs in-vivo or enhancing the contrast for in-vivo imaging applications.

Magnetic modulation biosensing system is utilized to rapidly, sensitively and simply detect biological assays, such as DNA molecules and proteins.

A magnetic modulation biosensing system (MMB) [1,2] rapidly and homogeneously detected biological targets at low concentrations without any washing or ...

Magnetic modulation BIOSENSING or MMB is a novel technique for the detection of biological molecules. Here a proof of principle assay is shown in which interleukin eight is detected when interleukin eight, also called IL eight, is added to a reaction mixture containing antibody coated magnetic beads by at Inated anti IL eight antibody and fluorescently labeled strep din. A molecular sandwich is created effectively linking the fluorescent molecule to the magnetic bead.The reaction is placed into a vete and alternating magnetic field. Gradients are applied through two electromagnetic poles, which maneuver the beads into oscillatory motion. The periodic motion of the bead attached fluorescent proteins in and out of an orthogonal laser beam produces a fluorescent signal that is collected by A PMT and demo modulated.Using a lock-in amplifier, the movement of the beads can be visualized using A CCD camera in place of the PMT synchronous movement is seen in samples where the magnetic beads have been linked to fluorescent proteins via IL eight. Hi, I'm Adia from the Nonlinear Optics and Laser Lab at the Department of Physical Electronics Telaviv University. I'm NoGo from the Department of

rapid-homogeneous-detection-biological-assays-using-magnetic

Research

JoVE Journal

Biology

We describe an electrochemical sensor assay method for rapid bacterial detection and identification. The assay involves a sensor array functionalized with DNA oligonucleotide capture probes for ribosomal RNA (rRNA) species-specific sequences. Sandwich hybridization of target rRNA with the capture probe and a horseradish peroxidase-linked DNA oligonucleotide detector probe produces a measurable amperometric current.

Bacterial Detection &amp; Identification Using Electrochemical Sensors

This video demonstrates a microfluidic system for a magnetic nanoparticle-based immunoassay. The detection system utilizes a microfluidic device incorporating a magnetic trap within its channels. Pre-formed immunocomplexes, comprised of antigen-coated magnetic nanoparticles bound to primary and peroxidase-conjugated secondary antibodies, are introduced into the channels. The immunocomplexes become captured in the porous magnetic trap upon applying an external magnetic field. Using a fluorogenic...

A Magnetic Nanoparticle-Based Immunoassay Using a Microfluidic Device

Source:Rhea Kang1, Gabby Mora1, Sherry Dunbar11Luminex, A DiaSorin Company, Austin.This video demonstrates multiplexed quantitative bacterial detection employing carboxylated magnetic polystyrene microspheres dyed into distinct sets. The procedure encompasses the formation of bead-bacteria complexes, magnetic separation, and flow-based analysis, enabling precise and simultaneous quantification of multiple bacteria in the same reaction well.

Multiplexed Quantitative Bacterial Detection using Dye-Labeled Magnetic Microspheres

A scanner for imaging magnetic particles in planar samples was developed using the planar frequency mixing magnetic detection technique. The magnetic intermodulation product response from the nonlinear nonhysteretic magnetization of the particles is recorded upon a two-frequency excitation. It can be used to take 2D images of thin biological samples.

Frequency Mixing Magnetic Detection Scanner for Imaging Magnetic Particles in Planar Samples

We present a magnetic levitation technique coupled with automated imaging and analysis in both a smartphone-compatible device and a device with embedded imaging and processing. This is applied to measure the density distribution of cells with two demonstrated biomedical applications: sickle cell disease diagnosis and separating white and red blood cells.

Magnetic Levitation Coupled with Portable Imaging and Analysis for Disease Diagnostics

This protocol describes the fabrication of a small, ready-to-use cassette that can be applied for visual detection of multiple nucleic acids in a single, test that is easy to operate. In this approach, a capillary array was used for multiplex and highly efficient detection of GMO targets.

Visual Detection of Multiple Nucleic Acids in a Capillary Array

Here, we present a protocol for the detection and quantification of low abundant molecules in complex solutions using molecular imprinting in combination with a capacitance biosensor.

Ultrasensitive Detection of Biomarkers by Using a Molecular Imprinting Based Capacitive Biosensor

Electrowetting-based digital microfluidic is a technique that utilizes a voltage-driven change in the apparent contact angle of a microliter-volume droplet to facilitate its manipulation. Combining this with functionalized magnetic beads enables the integration of multiple laboratory unit operations for sample preparation and identification of pathogens using Enzyme-linked Immunosorbent Assay (ELISA).

Electrowetting-based Digital Microfluidics Platform for Automated Enzyme-linked Immunosorbent Assay

This paper describes a magnetic levitation-based method that can specifically detect the presence of antigens, either soluble or membrane-bound, by quantifying changes in the levitation height of capture beads with fixed densities.

Quantification of Cellular Densities and Antigenic Properties using Magnetic Levitation

Microfluidics is a powerful tool for the development of diagnostic tests. However, expensive equipment and materials, as well as laborious fabrication and handling techniques, are often required. Here, we detail the fabrication protocol of an acrylic microfluidic device for magnetic micro- and nanoparticle-based immunoassays in a low-cost and simple-to-use setting.

Computer Numerical Control Micromilling of a Microfluidic Acrylic Device with a Staggered Restriction for Magnetic Nanoparticle-Based Immunoassays

Learn rapid homogeneous detection of biological molecules using magnetic modulation biosensing (MMB). This method detects IL-8 via sandwich immunoassay with magnetic beads and fluorescent labeling, eliminating washing steps.

Rapid Homogeneous Detection of Biological Assays Using Magnetic Modulation Biosensing System

Explore More Videos