Journal
/
Bioengineering
/
Monitoring the Wall Mechanics During Stent Deployment in a Vessel
JoVE Journal
Bioengineering
A subscription to JoVE is required to view this content.  Sign in or start your free trial.
JoVE Journal Bioengineering
Monitoring the Wall Mechanics During Stent Deployment in a Vessel

Monitoring the Wall Mechanics During Stent Deployment in a Vessel

DOI:
10.3791/3945-v

•

08:28 min

•

May 08, 2012

•

, ,
1Department of Mechanical and Materials Engineering,University of Nebraska-Lincoln

Chapters

  • 00:05Title
  • 01:12Preparation of the Latex Vessel
  • 02:17In vitro Test System and Calibration of ARAMIS System
  • 03:53Pretest to Avoid Excessive Background Noise
  • 04:31Stent Deployment
  • 05:27Image Analysis
  • 07:09Results: The Recoil Process of a Balloon-expandable Stent
  • 08:12Conclusion

Summary

Automatic Translation

Automatic Translation

Stent-induced arterial strain distributions are characterized using an optical surface strain measurement system. This visualization technique is used to gain insights into the impact of stent implantation on the host vessel.

Tags

Stent DeploymentVesselClinical TrialsRestenosis RatesStent DesignsStent-induced Strain ConcentrationsArterial WallRestenosisNon-uniform Strain DistributionStented ArterySurface Strain Measurement MethodARAMIS Stereo Optical Surface Strain Measurement SystemHigh Speed CamerasReference Point MotionThree Dimensional StrainsMesh StentLatex VesselContrasting PatternSurface Strain RecordingDeformationCalculated Strain DistributionsLocal Lesion ResponseComputational ModelsIn Vivo Study

Article

Embed

ADD TO PLAYLIST

Usage Statistics

Related Videos

check_url/3945?article_type=v

Magnetic Resonance Elastography Methodology for the Evaluation of Tissue Engineered Construct Growth
check_url/3945?article_type=v

Mass Cytometry: Protocol for Daily Tuning and Running Cell Samples on a CyTOF Mass Cytometer
check_url/3945?article_type=v

A Versatile Automated Platform for Micro-scale Cell Stimulation Experiments
check_url/3945?article_type=v

Experimental Investigation of Secondary Flow Structures Downstream of a Model Type IV Stent Failure in a 180° Curved Artery Test Section
check_url/3945?article_type=v

Adapting the Electrospinning Process to Provide Three Unique Environments for a Tri-layered In Vitro Model of the Airway Wall
check_url/3945?article_type=v

Ferromagnetic Bare Metal Stent for Endothelial Cell Capture and Retention
check_url/3945?article_type=v

Mammalian Cell Encapsulation in Alginate Beads Using a Simple Stirred Vessel
check_url/3945?article_type=v

Simulating the Mechanics of Lens Accommodation via a Manual Lens Stretcher
check_url/3945?article_type=v

Nondestructive Monitoring of Degradable Scaffold-Based Tissue-Engineered Blood Vessel Development Using Optical Coherence Tomography
check_url/3945?article_type=v

A Tripeptide-Stabilized Nanoemulsion of Oleic Acid

Read Article