Name: Identification of Plant Ice-binding Proteins Through Assessment of Ice-recrystallization Inhibition and Isolation Using Ice-affinity Purification (Video) | JoVE Journal
Uploaded: 2017-05-05T13:00:00.000+00:00
Duration: 9 min 43 s
Description: Learn to identify ice-binding proteins from freeze-tolerant plants using ice-recrystallization inhibition assays and ice-affinity purification. This simplified method isolates native IBPs without complex purification steps.

ai_agent_IP

ai_agent

maintenance

instantTrialDurationMinutes

isBiopharma

enableNewMyJoveSectionDesign

educationFeatures

seoMetaApi

ai_copilot_institution_blacklist

ai_chat_institution_blacklist

freeAccessWindow

ssoRoleCapture

scheduledMaintenanceBanner

joveLabsFeatures

disable_autoplay_for_bots

extended_trial_duration

5 minutes

This work was funded by an NSERC (Canada) grant to VKW.

1. Splat Apparatus Setup
<ol>
	<li>Fill a temperature-programmable circulating water bath with ethylene glycol (50% v/v in water). 
	NOTE: Green automotive ethylene glycol can be used.</li>
	<li>To assemble the external chamber, use insulated plastic tubing to attach the water bath to a double-walled glass bowl. Insulate the glass bowl with polystyrene foam and cover with a plastic petri dish lid. Cut a 3-4 inch hole in the bottom of the polystyrene chamber so that the light source can be seen through the glass chamber.</li>
	<li>Mount the external chamber on a dissection microscope, fitted with a camera port and a 4X polarized objective lens with a 10x ocular lens. Place an additional piece of polarized film in the bottom of the external chamber.</li>
	<li>Clamp a 1-1.5 m tube (~5 cm diameter) onto a retort stand and place inside a large polystyrene container, along with a cooling block positioned underneath the tube at the base of the retort stand.</li>
</ol>
2. Preparation of Native Protein Extracts for IRI Analysis
<ol>
	<li>To induce the expression of IBPs in freeze-tolerant grasses or other freeze-tolerant plant species, cold acclimate plants for up to 1 week at 4 &#176;C, under low light conditions (6 h light/ 18 h dark). This does not apply to samples collected from the field that have already been exposed to low temperature conditions and acclimation periods.</li>
	<li>Obtain approximately 0.1 g of leaf tissue by cutting at the base of the stem and then place in a 1.5 mL tube. Immediately flash freeze the sample in liquid nitrogen and store at -80 &#176;C until use.</li>
	<li>To lyse cells, grind tissue sample into a fine powder using a mortar and pestle under liquid nitrogen. Ensure that the liquid nitrogen does not evaporate during the homogenization process.</li>
	<li>Immediately place ground samples on ice and allow the liquid nitrogen to completely evaporate. Add 1 mL of a native protein extraction buffer containing 10 mM Tris-HCl, 25 mM NaCl (pH 7.5), with two EDTA-free protease inhibitor tablets added immediately before use. Pipette to mix; do not vortex. 
	NOTE: Additional additives may need to be used if the lysate contains secondary metabolites (see Discussion).</li>
	<li>Gently shake samples overnight (18-24 h) at 4 &#176;C. Conduct the remaining steps at 4 &#176;C.</li>
	<li>Remove cellular debris by centrifuging samples at ~16,000 x g for 5 min. Retain the soluble fraction and centrifuge for an additional 5 min if cellular debris persists. Clarified samples can be stored at -20 &#176;C until use.</li>
</ol>
3. Splat Assay Pre-experiment Set up
<ol>
	<li>Pour 100 mL of hexane into external chamber set up with the polarized film and add 5-6 desiccation beads to prevent moisture build up on the slides. Add a small amount of vacuum grease to the plate covering the bath and twist to ensure a tight seal and prevent evaporation of the hexane.</li>
	<li>Cool the hexane bath between -4 &#176;C and -6 &#176;C using the programmable water bath approximately 2-3 h before starting the experiment. Make sure to check the temperature of the hexane with a thermometer prior to beginning the experiment.</li>
	<li>Place the cooling block in a polystyrene box directly below the plastic tube and cover completely with dry ice, 40 min prior to starting the experiment.</li>
	<li>Before beginning the assay, ensure that the tube is level. To determine where on the cooling block the sample will drop, first test the procedure with water and indicate where the sample drops with a marker (as described below).</li>
	<li>Remove dry ice from the top of the cold block and place a glass microscope cover slide on the drop mark that has been determined with water.</li>
	<li>Immediately before starting assay, turn on the light source and scrape any ice that has formed on the bottom of the glass chamber. Avoid keeping the light source on unless ice crystals are being visualized to prevent heating the hexane.</li>
</ol>
4. Conducting the Splat Assay
<ol>
	<li>Dip the disposable tip affixed to an automatic pipette (1-20 &#181;L) in immersion oil, using a paper towel remove any excess oil. This step will allow the sample to fall rather than adhere to the outside of the pipette. 
	NOTE: Removing excess oil from the pipette is critical to ensure that oil droplets do not form on the ice crystals, making visualization difficult.</li>
	<li>Pipette 10 &#181;L of sample and place pipette directly over plastic tubing before releasing the sample. A distinct &#39;splat&#39; sound should be heard when the sample hits the glass cover slide, creating a monolayer of ice crystals.</li>
	<li>Quickly and carefully remove the microscope slide from the cold block using tweezers and place in the hexane bath on top of the polarizing film.</li>
	<li>Looking under the microscope, put the microscope slide into the field of view and adjust the objective lens so that the cross-polarization allows for the visualization of high contrast ice crystals. Adjust magnification to 40x.</li>
	<li>Attach the camera to the microscope and adjust the settings to &#34;macro&#34; to allow clear visualization of ice crystals and capture the image. 
	NOTE: Waiting up to 1 h to allow ice crystals to grow can give a clearer picture.</li>
	<li>Repeat steps 4.1-4.5 for all samples. Typically, place up to 6 slides with a different sample in the hexane chamber.</li>
	<li>Turn off the light source and place a plastic plate over the hexane bath, ensuring a tight seal. Allow ice crystals to anneal overnight (12-24 h, keeping a consistent annealing period within a particular assay). Following incubation, capture images of the ice films as described above. 
	NOTE: Some samples may recrystallize more quickly than others. If no recrystallization is apparent after 12 h, allow crystals to anneal for up to 24 h to ensure that no recrystallization will occur.</li>
</ol>
5. Splat Assay Data Analysis
<ol>
	<li>Upload the photos to a computer and directly compare the size of ice crystals before and after annealing. Samples with ice recrystallization activity will not grow, whereas samples without no IRI activity will recrystallize forming noticeably larger ice crystals. Light interference will make large ice crystals appear in slightly different hues and thus are easy to see.</li>
</ol>
6. Ice-affinity Purification Equipment Setup
<ol>
	<li>Fill a temperature-programmable circulating water bath with ethylene glycol. Green automotive ethylene glycol can be used.</li>
	<li>Connect the bath to a hollow, brass probe using insulated plastic tubing15.</li>
	<li>Construct a polystyrene container into which a 150 mL beaker can fit snuggly. Create a lid for the container with a hole in the center for the brass cold finger.</li>
</ol>
7. Preparation of Samples for Ice-affinity Purification
<ol>
	<li>Cold acclimate plant tissue as described in section 2.1.</li>
	<li>Collect ~100-150 g of the ground biomass (step 2.3) in 20 mL tubes and immediately flash freeze. Samples can be kept at -80 &#176;C before use.</li>
	<li>Prepare sample as described in sections 2.3-2.5. Use a 1:1 ratio (mg of tissue: mL of native protein extraction buffer) for resuspension of leaf tissue. Use additional protease inhibitor tablets to avoid the degradation of IBPs by endogenous proteases. 
	NOTE: If the tissue sample is too concentrated, adjust the ratio to 1:2 or 1:3 (mg of tissue: mL of native protein extraction buffer).</li>
	<li>To remove cellular debris, sieve lysate through 2 layers of cheesecloth, 3 times. Pellet the debris by centrifugation at 30,000 x g for 40 min at 4 &#176;C.</li>
	<li>Increase the volume of sample to 120 mL using native protein extraction buffer. Use the lysate immediately for ice-affinity purification to avoid any loss of ice-binding activity.</li>
</ol>
8. Conducting Ice-affinity Purification
<ol>
	<li>Prior to purification, set the programmable water bath to cool from -0.5 &#176;C to -3 &#176;C at a rate of -0.04 &#176;C/h. 
	NOTE: The cooling rate can be adjusted depending on the initial volume of sample.</li>
	<li>Cool the ice finger to -0.5 &#176;C and subsequently submerse it into a 50 mL tube containing cold distilled water. Add a few ice chips to facilitate ice nucleation and allow a thin layer of ice to form on the finger. This process typically takes between 20 and 30 min. 
	NOTE: Any lumps on the ice-coated finger should be smoothed with a gloved hand prior to placing in sample. If an ice layer does not form at -0.5 &#176;C, lower the temperature to -0.75 &#176;C.</li>
	<li>Place sample in a 150 mL glass beaker containing a small magnetic stir bar into a polystyrene container on top of the magnetic stirrer. Make sure that the ice finger is centered and lowered at least half way into the liquid sample. Seal the container.</li>
	<li>Allow the program to run for approximately two days, checking every 24 h. Once 50% of the sample is frozen, stop the program. Incorporation of IBPs into the ice hemisphere will result in &#34;ice-etching&#34;. 
	NOTE: Purification experiments can be done using larger sample volumes with the length of time at which the program runs adjusted accordingly.</li>
	<li>In order to remove the ice hemisphere, warm the probe to 4 &#176;C, rinse the hemisphere with distilled water to remove unbound protein, and then thaw at 4 &#176;C. 
	NOTE: Most IBPs are not stable in water and an appropriate buffer (i.e. 50 mM Tris-HCl, pH 8 or 50 mM ammonium bicarbonate, pH 8) will need to be added periodically during the thawing process (approximately 1 mL/2 h). Ice hemispheres can be wrapped in aluminum foil and stored at -20 &#176;C prior to thawing.</li>
	<li>If the ice-hemisphere still contains pigment, or to increase the sample purification, repeat steps 8.1-8.5 2-3 times. 
	NOTE: Although the concentration of IBP may be lower following multiple rounds of purification, purity is more valuable than yield if the purified samples will be analyzed using MS. If sufficient material is available, three rounds of ice-affinity purification is recommended.</li>
</ol>
9. Identification of IBPs
<ol>
	<li>Since IBPs are contained in a large volume following thawing of the ice-hemisphere, concentrate the samples. Concentrate samples containing ~100 g of tissue to ~1-3 mL using centrifugal concentration tubes with a 3,000 Da molecular weight cut-off to avoid the loss of small proteins.</li>
	<li>Prior to sending samples for MS, determine the protein concentration using a protein quantification assay such as a BCA or Bradford assay. Estimate the purity of samples by gel electrophoresis such as SDS-PAGE. Test the purified proteins for IRI activity prior to sending for MS to ensure that active protein has been retained through the purification and concentration steps.</li>
	<li>Use concentrated samples directly for mass spectrometry analysis10.</li>
</ol>

<ol><li>Sidebottom, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Heat-stable+antifreeze+protein+from+grass%5BTitle%5D)+AND+%22Nature%22%5BJournal%5D)">Heat-stable antifreeze protein from grass.</a> Nature. 406 (6793), 256(2000).</li>
<li>Duman, J. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Antifreeze+and+ice+nucleator+proteins+in+terrestrial+arthropods%5BTitle%5D)+AND+%22Annu+Rev+Physiol%22%5BJournal%5D)">Antifreeze and ice nucleator proteins in terrestrial arthropods.</a> Annu Rev Physiol. 63, 327-357 (2001).</li>
<li>Davies, P. L., Hew, C. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Biochemistry+of+fish+antifreeze+proteins%5BTitle%5D)+AND+%22FASEB+J%22%5BJournal%5D)">Biochemistry of fish antifreeze proteins.</a> FASEB J. 4 (8), 2460-2468 (1990).</li>
<li>Gilbert, J. A., Hill, P. J., Dodd, C. E., Laybourn-Parry, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Demonstration+of+antifreeze+protein+activity+in+Antarctic+lake+bacteria%5BTitle%5D)+AND+%22Microbiology%22%5BJournal%5D)">Demonstration of antifreeze protein activity in Antarctic lake bacteria.</a> Microbiology. 150 (Pt 1), 171-180 (2004).</li>
<li>Knight, C. A., Cheng, C. C., DeVries, A. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Adsorption+of+alpha-helical+antifreeze+peptides+on+specific+ice+crystal+surface+planes%5BTitle%5D)+AND+%22Biophys.+L%22%5BJournal%5D)">Adsorption of alpha-helical antifreeze peptides on specific ice crystal surface planes.</a> Biophys. L. 59 (20), 409-418 (1991).</li>
<li>Yeh, Y., Feeney, R. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Antifreeze+proteins%3A+structures+and+mechanisms+of+function%5BTitle%5D)+AND+%22Chem.+Rev%22%5BJournal%5D)">Antifreeze proteins: structures and mechanisms of function.</a> Chem. Rev. 96 (2), 601-618 (1996).</li>
<li>Smolin, N., Daggett, V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Formation+of+ice-like+water+structure+on+the+surface+of+an+antifreeze+protein%5BTitle%5D)+AND+%22J.+Phys.+Chem.+B%22%5BJournal%5D)">Formation of ice-like water structure on the surface of an antifreeze protein.</a> J. Phys. Chem. B. 112 (19), 6193-6202 (2008).</li>
<li>Graham, L. A., Davies, P. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Glycine-rich+antifreeze+proteins+from+snow+fleas%5BTitle%5D)+AND+%22Science%22%5BJournal%5D)">Glycine-rich antifreeze proteins from snow fleas.</a> Science. 310 (5747), 461(2005).</li>
<li>Hawes, T. C., Marshall, C. J., Wharton, D. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Antifreeze+proteins+in+the+Antarctic+springtail%2C+Gressittacantha+terranova%5BTitle%5D)+AND+%22J.+Comp.+Physiol.+B%22%5BJournal%5D)">Antifreeze proteins in the Antarctic springtail, Gressittacantha terranova.</a> J. Comp. Physiol. B. 181 (6), 713-719 (2011).</li>
<li>Basu, K., Graham, L. A., Campbell, R. L., Davies, P. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Flies+expand+the+repertoire+of+protein+structures+that+bind+ice%5BTitle%5D)+AND+%22Proc.+Natl.+Acad.+Sci.+U.S.A%22%5BJournal%5D)">Flies expand the repertoire of protein structures that bind ice.</a> Proc. Natl. Acad. Sci. U.S.A. 112 (3), 737-742 (2015).</li>
<li>Guo, S., Garnham, C. P., Whitney, J. C., Graham, L. A., Davies, P. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Re-evaluation+of+a+Bacterial+Antifreeze+Protein+as+an+Adhesin+with+Ice-Binding+Activity%5BTitle%5D)+AND+%22PLoS+One%22%5BJournal%5D)">Re-evaluation of a Bacterial Antifreeze Protein as an Adhesin with Ice-Binding Activity.</a> PLoS One. 7 (11), e48805(2012).</li>
<li>Marshall, C. B., Fletcher, G. L., Davies, P. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Hyperactive+antifreeze+protein+in+a+fish%5BTitle%5D)+AND+%22Nature%22%5BJournal%5D)">Hyperactive antifreeze protein in a fish.</a> Nature. 429 (6988), 153(2004).</li>
<li>Zhang, D. Q., Liu, B., Feng, D. R., He, Y. M., Wang, J. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Expression%2C+purification+and+antifreeze+activity+of+carrot+antifreeze+protein+and+its+mutants%5BTitle%5D)+AND+%22Protein+Expr.+Purif%22%5BJournal%5D)">Expression, purification and antifreeze activity of carrot antifreeze protein and its mutants.</a> Protein Expr. Purif. 35 (2), 257-263 (2007).</li>
<li>Gupta, R., Dreswal, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Low+temperature+stress+modulated+secretome+analysis+and+purification+of+antifreeze+protein+from+Hippophae+rhamnoides%2C+a+Himalayan+wonder+plant%5BTitle%5D)+AND+%22Proteome+Res%22%5BJournal%5D)">Low temperature stress modulated secretome analysis and purification of antifreeze protein from Hippophae rhamnoides, a Himalayan wonder plant.</a> Proteome Res. 11 (5), 2684-2696 (2012).</li>
<li>Kuiper, M. J., Lankin, C., Gauthier, S. Y., Walker, V. K., Davies, P. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Purification+of+antifreeze+proteins+by+adsorption+to+ice%5BTitle%5D)+AND+%22Biochem.+Biphys.+Res.+Commun%22%5BJournal%5D)">Purification of antifreeze proteins by adsorption to ice.</a> Biochem. Biphys. Res. Commun. 300 (3), 645-648 (2003).</li>
<li>Middleton, A. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Isolation+and+characterization+of+ice-binding+proteins+from+higher+plants%5BTitle%5D)+AND+%22Methods+Mol.+Biol%22%5BJournal%5D)">Isolation and characterization of ice-binding proteins from higher plants.</a> Methods Mol. Biol. 1166, 255-277 (2014).</li>
<li>Bredow, M., Vanderbeld, B., Walker, V. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Ice-binding+proteins+confer+freezing+tolerance+in+transgenic+Arabidopsis+thaliana%5BTitle%5D)+AND+%22Plant+Biotechnol.+J%22%5BJournal%5D)">Ice-binding proteins confer freezing tolerance in transgenic Arabidopsis thaliana.</a> Plant Biotechnol. J. , (2016).</li>
<li>Olijve, L. L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Blocking+rapid+ice+crystal+growth+through+nonbasal+plane+adsorption+of+antifreeze+proteins%5BTitle%5D)+AND+%22Proc.+Natl.+Acad.+Sci.+U.S.A%22%5BJournal%5D)">Blocking rapid ice crystal growth through nonbasal plane adsorption of antifreeze proteins.</a> Proc. Natl. Acad. Sci. U.S.A. 113 (14), 3740-3745 (2016).</li>
<li>Zakharov, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Ice+Recrystallization+in+a+Solution+of+a+Cryoprotector+and+Its+inhibition+by+a+Protein%3A+Synchrotron+X-Ray+Diffraction+Study%5BTitle%5D)+AND+%22J.+Pharm.+Sci%22%5BJournal%5D)">Ice Recrystallization in a Solution of a Cryoprotector and Its inhibition by a Protein: Synchrotron X-Ray Diffraction Study.</a> J. Pharm. Sci. 105 (7), 2129-2138 (2016).</li>
<li>Capicciotti, C. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Small+molecule+ice+recrystallization+inhibitors+enable+freezing+of+human+red+blood+cells+with+reduced+glycerol+concentrations%5BTitle%5D)+AND+%22Sci.+Rep%22%5BJournal%5D)">Small molecule ice recrystallization inhibitors enable freezing of human red blood cells with reduced glycerol concentrations.</a> Sci. Rep. 5, 9692(2015).</li>
<li>Knight, C. A., Cheng, C. C., DeVries, A. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Adsorption+of+alpha-helical+antifreeze+peptides+on+specific+ice+crystal+surface+planes%5BTitle%5D)+AND+%22Biophys.+J%22%5BJournal%5D)">Adsorption of alpha-helical antifreeze peptides on specific ice crystal surface planes.</a> Biophys. J. 59 (2), 409-418 (1991).</li>
<li>Van Driessche, E., Beeckmans, S., Dejaegere, R., Kanarek, L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Thiourea%3A+the+antioxidant+of+choice+for+the+purification+of+proteins+from+phenol+rich+plant+tissues%5BTitle%5D)+AND+%22Anal.+Biochem%22%5BJournal%5D)">Thiourea: the antioxidant of choice for the purification of proteins from phenol rich plant tissues.</a> Anal. Biochem. 141 (1), 184-188 (1984).</li>
<li>Marshall, C. J., Basu, K., Davies, P. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Ice-shell+purification+of+ice-binding+proteins%5BTitle%5D)+AND+%22Cryobiology%22%5BJournal%5D)">Ice-shell purification of ice-binding proteins.</a> Cryobiology. 72 (3), 258-263 (2016).</li>
<li>Basu, K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Determining+the+ice-binding+planes+of+antifreeze+proteins+by+fluorescence-based+ice+plane+affinity%5BTitle%5D)+AND+%22J.+Vis.+Exp%22%5BJournal%5D)">Determining the ice-binding planes of antifreeze proteins by fluorescence-based ice plane affinity.</a> J. Vis. Exp. (83), e51185(2014).</li>
<li>Sandve, S. R., Rudi, H., Asp, T., Rognli, O. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Tracking+the+evolution+of+a+cold+stress+associated+gene+family+in+cold+tolerant+grasses%5BTitle%5D)+AND+%22BMC+Evol.+Biol%22%5BJournal%5D)">Tracking the evolution of a cold stress associated gene family in cold tolerant grasses.</a> BMC Evol. Biol. 8 (245), (2008).</li>
<li>Middleton, A. J., Brown, A. M., Davies, P. L., Walker, V. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Identification+of+the+ice-binding+face+of+a+plant+antifreeze+protein%5BTitle%5D)+AND+%22FEBS+Lett%22%5BJournal%5D)">Identification of the ice-binding face of a plant antifreeze protein.</a> FEBS Lett. 583 (4), 815-819 (2009).</li>
</ol>

The authors have nothing to disclose.

For the successful analysis and purification of IBPs, it is important to understand the temperature-sensitive nature of some of these proteins. Certain plant IBPs become unstable at temperatures above 0 &#176;C, resulting in unfolding, precipitation and inactivity. In order to obtain active IBPs, it is often critical that plants are processed in a cold room (~4 &#176;C) and samples are kept on ice during experimentation. Another factor to consider when using whole-cell crude lysates is the degradation of proteins by endo...

Ice-binding proteins (IBPs) are a diverse family of protective proteins that have been discovered in a number of organisms including plants1, insects2, fish3, and microbes4. The key feature of these proteins is their unique ability to specifically and efficiently adsorb to ice crystals, modifying their growth. IBPs have several documented properties, with the two most well characterized being thermal hysteresis (TH) and ice-recrystallization inhibition (IRI). TH activity is more readily observed in IBPs produced in freeze-intolerant animals. This activity results in lowering of the freezing point of organisms&#39; circulatory or interstitial fluids to prevent freezing. In contrast, in freeze-tolerant organisms, which will inevitably freeze at subzero temperatures, IBPs appear to have low TH activity. Despite the low TH activity, a high IRI activity to restrict ice crystal growth is often observed with these proteins. For the freeze-tolerant organism, this IRI activity presumably helps protect cells from the uncontrolled growth of ice in extracellular compartments.
The &#34;mattress button&#34; model can be used to describe the mechanism by which IBPs prevent the growth of ice crystals5. Under this model, IBPs specifically adsorb to the ice crystal surface at intervals, such that water molecules can only incorporate with the growing ice crystal lattice in the space between bound IBPs. This creates a curvature that makes the incorporation of additional water molecules unfavorable, an event that can be described by the Gibbs-Thomson effect6. The anchored clathrate waters hypothesis provides a mechanism for the specific binding of IBPs to the ice crystal surface whereby the presence of charged residues, specifically positioned on the protein ice binding site, results in the reorganization of water molecules so they match one or more planes of the ice crystal lattice7.
TH activity can be quantified by measuring the difference between the melting and freezing temperatures of a single ice crystal in the presence of an IBP. While TH activity is a widely accepted method of evaluating the activity of IBPs, the low TH gap produced by plant IBPs (typically only a fraction of a degree) normally requires a high protein concentration, specialized equipment and operator experience. Although non-IBPs may restrict ice crystal growth, it is a property shared by all IBPs and thus testing for IRI activity is an effective initial screen for the presence of IBPs, especially for those with low TH activity. The methodology used to test this activity is known as a &#39;splat assay&#39;, whereby a protein sample is flash frozen to produce a monolayer of small ice crystals, which are observed over a period of time to determine if ice crystal growth is restricted. Unlike other methods used to screen a source tissue sample for the presence of IBPs, this technique is applicable to low protein concentrations in the range of 10-100 ng, utilizes easily-fabricated equipment, and generates data that is quickly and easily interpreted. However, it is important to stress that this assay provides an initial screen for IBPs that should be followed by the determination of TH and ice crystal shaping.
The isolation of native proteins is challenging, often requiring information regarding the structural and biochemical properties of a protein of interest. The affinity of IBPs for ice allows for the isolation of these proteins using ice as a substrate for purification purposes. Since the majority of molecules are pushed ahead of the ice-water boundary during ice crystal growth, slow growth of an ice-hemisphere in the presence of an IBP sample results in a highly-purified sample, devoid of large quantities of contaminating proteins and solutes. This method has been used to identify IBPs from insects8,9,10, bacteria11, fish12 and plants13,14. Additionally, the IBP-enriched fractions achieved through this method can also be used for downstream biochemical analysis. This paper outlines the identification of IBPs in plants through the induction and extraction of IBPs, analysis of IRI activity to confirm the presence of proteins, and the isolation of proteins using ice affinity purification.

<table><tbody><tr><td>1.5 mL microcentrifugetubes</td><td>Fisher</td><td>05-408-129</td><td></td></tr><tr><td>Adjustable lab jack</td><td>Fisher</td><td>S63080</td><td></td></tr><tr><td>Benchtop centrifuge</td><td>Desaga MC2</td><td></td><td></td></tr><tr><td>Brass probe</td><td>Custom built</td><td></td><td></td></tr><tr><td>Camera/camera port</td><td>Canon</td><td></td><td>Canon Power Shot SX110 digitial camera; custom built microscope port</td></tr><tr><td>Cheesecloth</td><td>Purewipe/Fisher Scientific</td><td>06-665-25A</td><td></td></tr><tr><td>Concentration tubes (0.5 mL)</td><td>EMD Millipore</td><td>UFC501008</td><td></td></tr><tr><td>Concentration tubes (15 mL)</td><td>EMD Millipore</td><td>UFC900308</td><td></td></tr><tr><td>Conical tubes (50 mL)</td><td>Thermo Fisher</td><td>AM12502</td><td></td></tr><tr><td>Cooling block</td><td>VWR</td><td>13259</td><td>Use a metal heating block</td></tr><tr><td>Dehumidifier</td><td>Whirlpool</td><td></td><td>50 pint Energy Star dehumidifier; purchase from local supplier</td></tr><tr><td>Dessciation beads</td><td>t.h.e. Dessicant/VWR</td><td>EM-DX0017-2</td><td>6-8 mesh size; 100% indicating</td></tr><tr><td>Dissection microscope</td><td>Olympus Tokyo</td><td></td><td></td></tr><tr><td>Double walled glass bowl</td><td>Generic</td><td></td><td>Purchase from local lab glassware supplier</td></tr><tr><td>Dry ice</td><td>Generic</td><td></td><td>Use local supplier; hazardous&amp;nbsp;</td></tr><tr><td>EDTA-protease inhibitor tablets</td><td>Sigma Aldrich</td><td>11836170001</td><td>Roche cOmplete mini</td></tr><tr><td>Ethylene glycol</td><td>Generic</td><td></td><td>Green automotive ethylene glycol can be purchased from any local hardware store (&lt;em&gt;i.e.&lt;/em&gt; Home Depot)</td></tr><tr><td>Hexane</td><td>Sigma Aldrich</td><td>296090</td><td>Anhydrous, 95%; hazardous</td></tr><tr><td>Immersion oil</td><td>Sigma Aldrich</td><td>56822</td><td></td></tr><tr><td>JA10/20 centrifuge</td><td>Beckman</td><td></td><td></td></tr><tr><td>Large plastic Petri dish</td><td>Generic</td><td></td><td></td></tr><tr><td>Liquid nitrogen</td><td>Generic</td><td></td><td>Use local supplier; hazardous&amp;nbsp;</td></tr><tr><td>Magnetic stir plate</td><td>Hanna Instruments</td><td>HI190M</td><td></td></tr><tr><td>Microscope cover slides</td><td>Fisher</td><td>12-542A</td><td></td></tr><tr><td>Plastic tube</td><td>Generic</td><td></td><td>Purchase PVC pipe from local hardware store</td></tr><tr><td>Polarized film</td><td>Edmund Optics</td><td>43-781</td><td></td></tr><tr><td>Polystyrene foam</td><td>Generic</td><td></td><td>Can be constructed from polystyrene shipping boxes</td></tr><tr><td>Poreclain mortar and pestle</td><td>Fisher</td><td>FB961</td><td></td></tr><tr><td>PVPP</td><td>Sigma Aldrich</td><td>77627</td><td>110 &amp;micro;m particle size</td></tr><tr><td>Retort Stand</td><td>Fisher</td><td>12-000</td><td></td></tr><tr><td>Small stir bar</td><td>Fisher</td><td>14-513-51</td><td></td></tr><tr><td>Temperature-programmable water bath</td><td>VWR</td><td>13271-118</td><td></td></tr><tr><td>Vacuum grease</td><td>Dow Corning/Sigma Aldrich</td><td>Z273554</td><td></td></tr><tr><td>Vinyl tubing</td><td>Generic</td><td></td><td></td></tr></tbody></table>

identification of plant ice-binding proteins through assessment of ice-recrystallization inhibition and isolation using ice-affinity purification

Identification of Plant Ice-binding Proteins Through Assessment of Ice-recrystallization Inhibition and Isolation Using Ice-affinity Purification

Ice-binding proteins (IBPs) belong to a family of stress-induced proteins that are synthesized by certain organisms exposed to subzero temperatures. In plants, freeze damage occurs when extracellular ice crystals grow, resulting in the rupture of plasma membranes and possible cell death. Adsorption of IBPs to ice crystals restricts further growth by a process known as ice-recrystallization inhibition (IRI), thereby reducing cellular damage. IBPs also demonstrate the ability to depress the freezing point of a solution below the equilibrium melting point, a property known as thermal hysteresis (TH) activity. These protective properties have raised interest in the identification of novel IBPs due to their potential use in industrial, medical and agricultural applications. This paper describes the identification of plant IBPs through 1) the induction and extraction of IBPs in plant tissue, 2) the screening of extracts for IRI activity, and 3) the isolation and purification of IBPs. Following the induction of IBPs by low temperature exposure, extracts are tested for IRI activity using a &#39;splat assay&#39;, which allows the observation of ice crystal growth using a standard light microscope. This assay requires a low protein concentration and generates results that are quickly obtained and easily interpreted, providing an initial screen for ice binding activity. IBPs can then be isolated from contaminating proteins by utilizing the property of IBPs to adsorb to ice, through a technique called &#39;ice-affinity purification&#39;. Using cell lysates collected from plant extracts, an ice hemisphere can be slowly grown on a brass probe. This incorporates IBPs into the crystalline structure of the polycrystalline ice. Requiring no a priori biochemical or structural knowledge of the IBP, this method allows for recovery of active protein. Ice-purified protein fractions can be used for downstream applications including the identification of peptide sequences by mass spectrometry and the biochemical analysis of native proteins.

For ease of set-up, Figure 1 and Figure 2 are included as visual representations of the equipment used for IRI analysis and ice-affinity purification, respectively. Results of IRI analysis using extracts collected from mustard weed with and without IBPs are depicted in Figure 3. These results show that extracts collected from mustard weed, which is not freeze-tolerant, were unable to...

This paper outlines the identification of ice-binding proteins from freeze-tolerant plants through the assessment of ice-recrystallization inhibition activity and subsequent isolation of native IBPs using ice-affinity purification.

Ice-binding proteins (IBPs) belong to a family of stress-induced proteins that are synthesized by certain organisms exposed to subzero temperatures. In ...

The overall goal of this protocol is to identify novel ice-binding proteins or IBPs from plants by testing for ice-binding activity and isolating native peptides using ice-affinity purification. This method can help answer key questions in the field of plant freeze tolerance, specifically ice-binding proteins. The main advantage of this technique is that it allows you isolate ice-binding proteins from native extracts without the use of complicated purification methods.Visual demonstration of this method is critical, since the apparatus set-up can be difficult to conceptualize. Begin this protocol with splat apparatus setup as described in the text protocol. To induce the expression of ice-binding proteins, or IBPs, in freeze-tolerant grasses or other freeze-tolerant plant species, cold-acclimate plants for up to one week at four degrees Celsius under low light conditions.Obtain approximately 0.1 gram of leaf tissue by cutting at the base of the stem and then placing in a 1.5 milliliter tube. Immediately flash-freeze the sample in liquid nitrogen and store at minus 80 degrees Celsius until use. To lyse the cells, grind the tissue sample into a fine powder using a mortar and pestle under liquid nitrogen.Ensure that the liquid nitrogen does not evaporate during the homogenization process. Immediately place the ground samples on ice and allow the liquid nitrogen to completely evaporate. Then add one milliliter of a native protein extraction buffer and pipette to mix.Gently shake the samples overnight at four degrees Celsius and conduct the remaining steps at the same temperature. The next day, remove cellular debris by centrifuging the samples at approximately 1, 600 times G for five minutes. Retain the soluble fraction and centrifuge for an additional five minutes if cellular debris persists.Clarified samples can be stored at minus 20 degrees Celsius until use. Pour 100 milliliters of hexane into the external chamber set up with the polarized film and add five to six desiccation beads to prevent moisture buildup on the slides. Then add a small amount of vacuum grease to the plate covering the bath and twist to ensure a tight seal and prevent evaporation of the hexane.40 minutes prior to starting the experiment, place the cooling block in a polystyrene box directly below the plastic tube and cover it completely with dry ice. Before beginning the assay, ensure that the tube is level. Then remove the dry ice from the top of the cold block.First, test this procedure with water to determine where on the cooling block the sample will drop. Dip the disposable tip affixed to an automatic pipette in immersion oil, which will allow the sample to fall rather than adhere to the outside of the pipette. Use a paper towel to remove any excess oil.Then aspirate 10 microliters of water. Place the pipette directly over the plastic tubing before releasing the water. A distinct splat sound should be heard when the water hits the cooling block, creating a monolayer of ice crystals.Next, place a glass microscope cover slide on the drop mark that has been determined with water. Immediately before starting the assay, turn on the light source and scrape any ice that has formed on the bottom of the glass chamber. Then perform the splat assay with the sample, as done for the water, releasing 10 microliters of the sample onto the glass cover slide to create a monolayer of ice crystals.Quickly and carefully remove the microscope slide from the cold block using tweezers and place in the hexane bath on top of the polarizing film. Looking under the microscope, put the microscope slide into the field of view and adjust the objective lens so that the cross-polarization allows for the visualization of high-contrast ice crystals. Attach the camera to the microscope and adjust the settings to macro to allow clear visualization of ice crystals and capture the image.Repeat these steps for all samples. Typically place up to six slides with a different sample in the hexane chamber. Once finished, turn off the light source.Then place a plastic plate over the hexane bath, ensuring a tight seal, and allow ice crystals to anneal overnight. Following incubation, capture images of the ice films as before. After cold-acclimating the plant tissue as before, collect approximately 100 to 150 grams of the ground biomass in 20-milliliter tubes.Immediately flash-freeze the samples, and keep them at minus 80 degrees Celsius before use. Prepare the sample as before, using a one-to-one ratio for re-suspension of the leaf tissue. Use additional protease inhibitor tablets to avoid the degradation of IBPs by endogenous proteases.To remove cellular debris, sift the lysate through two layers of cheesecloth three times. Pellet the debris by centrifugation at 30, 000 times G for 40 minutes at four degrees Celsius. Then increase the volume of sample to 120 milliliters using native protein extraction buffer and use the lysade immediately for ice-affinity purification to avoid any loss of ice-binding activity.After cooling the ice finger to minus 0.5 degrees Celsius, subsequently submerse it into a 50-milliliter tube containing cold distilled water. Add a few ice chips to facilitate ice nucleation and allow a thin layer of ice to form on the finger. This process typically takes between 20 and 30 minutes.Place the sample in a 150-milliliter glass beaker containing a small magnetic stir bar, which is placed in a polystyrene container on top of the magnetic stirrer. Make sure that the ice finger is centered and lowered at least halfway into the liquid sample. Then seal the container.Allow the program to run for approximately two days, checking every 24 hours. Once 50%of the sample is frozen, stop the program. Incorporation of IBPs into the ice hemisphere will result in ice etching.To remove the ice hemisphere, warm the probe to four degrees Celsius. Then rinse the hemisphere with distilled water to remove unbound protein and thaw at four degrees Celsius. If the ice hemisphere still contains pigment, or to increase the sample purification, repeat the purification steps two to three times.Shown here are extracts collected from a buffer control lacking IBPs and extracts from wild-type Arabidopsis thaliana that do not contain IBPs. After 18 hours, the buffer control and A.thaliana extracts are unable to restrict ice crystal growth. In contrast, the small ice crystals seen with extracts of transgenic A.thaliana expressing IBPs from cold-acclimated Lolium perenne restrict ice crystal growth substantially.After the first round of purification, the high degree of ice etching on the hemisphere surface indicates that IBPs have adsorped to the ice and modified growth of the ice crystals. To remove additional solutes, pigments, and contaminating proteins, a second round of ice-affinity was used, resulting in a clearer ice hemisphere. Following this procedure, ice shaping and thermal hysteresis can be evaluated using a nanoliter osmometer in order to further characterize ice-binding proteins.Additionally, isolated fractions can be sent for mass spectometry in order to identify the peptide sequences.

identification-plant-ice-binding-proteins-through-assessment-ice

Research

JoVE Journal

Biochemistry

Ice binding proteins (IBPs), also known as antifreeze proteins, inhibit ice growth and are a promising additive for use in the cryopreservation of tissues. The main tool used to investigate IBPs is the nanoliter osmometer. We developed a home-designed cooling stage mounted on an optical microscope and controlled using a custom-built LabVIEW routine. The nanoliter osmometer described here manipulated the sample temperature in an ultra-sensitive manner.

LabVIEW-operated Novel Nanoliter Osmometer for Ice Binding Protein Investigations

We describe here a protocol for the purification and characterization of plant protein complexes. We demonstrate that by immunoprecipitating a single protein within a complex, so we can identify its post-translational modifications and its interacting partners.

Identification of Post-translational Modifications of Plant Protein Complexes

Antifreeze proteins (AFPs) bind to specific planes of ice to prevent or slow ice growth. Fluorescence-based ice plane affinity (FIPA) analysis is a modification of the original ice-etching method for determination of AFP-bound ice planes. AFPs are fluorescently labeled, incorporated into macroscopic single ice crystals, and visualized under UV light.

Determining the Ice-binding Planes of Antifreeze Proteins by Fluorescence-based Ice Plane Affinity

Here we present a protocol that allows one to visualize sites of ice formation and avenues of ice propagation in plants utilizing high resolution infrared thermography (HRIT).

The Use of High-resolution Infrared Thermography (HRIT) for the Study of Ice Nucleation and Ice Propagation in Plants

Chromatin immunoprecipitation is a powerful technique for the identification of DNA binding sites of Arabidopsis proteins in vivo. This procedure includes chromatin cross-linking and fragmentation, immunoprecipitation with selective antibodies against the protein of interest, and qPCR analysis of bound DNA. We describe a simple ChIP assay optimized for Arabidopsis plants.

Chromatin Immunoprecipitation Assay for the Identification of Arabidopsis Protein-DNA Interactions In Vivo

This protocol combines the characterization of a protein sample by capillary gel electrophoresis and a fast-binding screening for charged ligands by affinity capillary electrophoresis. It is recommended for proteins with a flexible structure, such as intrinsically disordered proteins, to determine any differences in binding for different conformers.

Analysis of AtHIRD11 Intrinsic Disorder and Binding Towards Metal Ions by Capillary Gel Electrophoresis and Affinity Capillary Electrophoresis

This protocol focuses on the identification of proteins that bind to inositol phosphates or phosphoinositides. It uses affinity chromatography with biotinylated inositol phosphates or phosphoinositides that are immobilized via streptavidin to agarose or magnetic beads. Inositol phosphate or phosphoinositide binding proteins are identified by Western blotting or mass spectrometry.

Identification of Inositol Phosphate or Phosphoinositide Interacting Proteins by Affinity Chromatography Coupled to Western Blot or Mass Spectrometry

Described here is a proximity labeling method for identification of interaction partners of the TIR domain of the NLR immune receptor in Nicotiana benthamiana leaf tissue. Also provided is a detailed protocol for the identification of interactions between other proteins of interest using this technique in Nicotiana and other plant species.

TurboID-Based Proximity Labeling for In Planta Identification of Protein-Protein Interaction Networks

The present protocol describes the crystallization of microscopic ice crystals and clathrate hydrates in microfluidic devices, enabling liquid exchange around the formed crystals. This provides unparalleled possibilities to examine the crystallization process and binding mechanisms of the inhibitors.

A Microfluidic Approach for the Study of Ice and Clathrate Hydrate Crystallization

Here, we present a step-by-step protocol for performing the proximity labeling (PL) experiment in cucumber (Cucumis sativus L.) using AT4G18020 (APRR2)-AirID protein as a model. The method describes the construction of a vector, the transformation of a construct through agroinfiltration, biotin infiltration, protein extraction, and purification of biotin-labeled proteins through affinity purification technique.

AirID-Based Proximity Labeling for Protein-Protein Interaction in Plants

Learn to identify ice-binding proteins from freeze-tolerant plants using ice-recrystallization inhibition assays and ice-affinity purification. This simplified method isolates native IBPs without complex purification steps.

Identification of Plant Ice-binding Proteins Through Assessment of Ice-recrystallization Inhibition and Isolation Using Ice-affinity Purification (Video) | JoVE Journal

Identification of Plant Ice-binding Proteins Through Assessment of Ice-recrystallization Inhibition and Isolation Using Ice-affinity Purification

Explore More Videos