Name: Fabricating Optical-quality Glass Surfaces to Study Macrophage Fusion (Video) | JoVE Journal
Uploaded: 2018-03-14T12:30:00.000+00:00
Duration: 8 min 50 s
Description: Learn how to fabricate optical-quality glass surfaces for studying macrophage fusion using live imaging and super-resolution microscopy. This protocol transforms cover glass into fusogenic surfaces to investigate immune cell behavior.

ai_agent_IP

ai_agent

maintenance

instantTrialDurationMinutes

isBiopharma

enableNewMyJoveSectionDesign

educationFeatures

seoMetaApi

ai_copilot_institution_blacklist

ai_chat_institution_blacklist

freeAccessWindow

ssoRoleCapture

scheduledMaintenanceBanner

joveLabsFeatures

disable_autoplay_for_bots

extended_trial_duration

5 minutes

We wish to thank members of the Ugarova laboratory and investigators in the Center for Metabolic and Vascular Biology for helpful discussion of this work. James Faust wishes to express his gratitude to the instructors at the European Molecular Biology Laboratory Super Resolution Microscopy course in 2015. We wish to thank Satya Khuon at Janelia for help with sample preparation for LLSM. During the review and filming portions of this work James Faust was supported by a T32 Fellowship (5T32DK007569-28). The Lattice Light Sheet component of this work was supported by HHMI and the Betty and Gordon Moore Foundation. T.U. is funded by NIH grant HL63199.

Procedures that utilize animals were approved by the Animal Care and Use Committees at Mayo Clinic, Janelia Research Campus, and Arizona State University.
1. Preparing Acid-cleaned Cover Glass
NOTE: Cover glass purchased from many manufacturers may not be as clean as expected. Consider routinely cleaning batches of cover glass before any procedure where microscopy is involved.
<ol>
	<li>Purchase high stringency cover glass. Take special care to choose the correct thickness (0.15 or 0.17 mm). 
	NOTE: The choice of cover glass thickness is dependent on the microscope objective and is listed directly on the objective barrel.</li>
	<li>Incubate the cover glass in 12 M hydrochloric acid in a well-ventilated chemical fume hood for 1 h with sonication (42 kHz, 70 W). Repeat this step for two additional times with fresh 12 M HCl.</li>
	<li>Fill a separate beaker with ultrapure water and add the cover glass. Sonicate the cover glass for 5 - 10 min in a well-ventilated chemical hood. Repeat this step ten times.</li>
	<li>Incubate the cover glass in pure acetone in a well-ventilated chemical hood for 30 min with sonication. Repeat this step for two additional times.</li>
	<li>Fill a separate beaker with sterile ultrapure water and add the cover glass. Sonicate the cover glass for 5 - 10 min in a well-ventilated chemical hood. Repeat this step ten times.</li>
	<li>Incubate the cover glass in 100% ethyl alcohol in a chemical hood for 30 min with sonication. Repeat this step two additional times. 
	NOTE: The purity of the ethyl alcohol is important. Contaminants in the form of dissolved solids will dry on the glass and can promote macrophage fusion.</li>
	<li>For long-term storage, place the acid-cleaned cover glass in a container filled with pure ethyl alcohol. Alternatively, dry the cover glass with nitrogen gas and store in a vacuum desiccator.</li>
</ol>
2. Preparation of Fusogenic Optical-quality Surfaces
<ol>
	<li>Dissolve DMSO-free high-melting point paraffin wax in ultrapure toluene. 
	NOTE: Stock concentrations are made at 10 mg/mL, and are diluted 1:9 in ultrapure toluene to make a 1 mg/mL working solution. 
	Caution: Toluene should be handled with care as a teratogen. Dispose of toluene according to the institutional chemical hygiene plan.</li>
	<li>Apply the paraffin working solution to a dry acid-cleaned cover glass at a volume that evenly covers the glass surface. Decant excess solution and dry the cover glass with nitrogen gas or air. For bulk preparation, use a Coplin jar designed to accommodate the cover glass.</li>
	<li>Polish the cover glass by 3 strokes in the x axis and next by 3 strokes in the y axis with a lint-free wipe (see Table of Materials).</li>
	<li>Immediately before the experiment is conducted, wash the cover glass with sterile ultrapure water, and subsequently sterilize for 15 - 30 min with ultraviolet light in a biological safety hood. Alternatively, sterilize the cover glass by ethylene oxide or gamma irradiation.</li>
</ol>
3. Micropatterning Hydrocarbon-containing Compounds to Confine Fusion to Predetermined Regions
<ol>
	<li>Dry the acid-cleaned cover glass and immobilize the glass on a flat surface.</li>
	<li>Using forceps, carefully immerse a gold transmission electron microscopy finder grid in a working solution of the hydrocarbon compound(s). Choose a hydrocarbon compound that meets the end goal of the experiment (see Table 1). Wick away excess solution by gently tapping the grid on filter paper, and immediately place the grid in the center of the cover glass. Allow the toluene to dry for 2 min before proceeding to the next step.</li>
	<li>Make sure the grid is bonded to the glass by gently inverting the glass. If the grid detaches repeat step 3.2 using a new cover glass. 
	NOTE: If a plasma cleaner is not available, omit step 3.4.</li>
	<li>Plasma clean the cover glass by treatment with vacuum gas plasma. 
	NOTE: The finder grid acts as a mask to protect the underlying surface adsorbed with long-chain hydrocarbons from the plasma. The regions that are unprotected by the grid are rendered non-fusogenic by exposure to plasma. The amount of time the cover glass is expose to plasma should be determined empirically.</li>
	<li>Using fine-tip forceps, carefully remove the grid from the glass surface to expose the micropattern.</li>
</ol>
4. Fabricating Glass Bottom Dishes
<ol>
	<li>Drill a 6 - 10 mm circular hole in the bottom of a 35-mm plastic Petri dish using a step drill bit. 
	NOTE: It is critical to use a step drill bit to create smooth edges. If edges are too rough, the cover glass will not bond flat to the bottom of the dish. Imperfectly flat surfaces make microscopy difficult.</li>
	<li>Carefully mix and degas silicone elastomer according to the manufacturer&#39;s instructions (i.e., polydimethylsiloxane; PDMS).</li>
	<li>Apply a thin coating of elastomer just proximate to the edge of (i.e., circumscribing) the hole. 
	NOTE: The elastomer should appear as a continuous albeit thin band surrounding the hole.</li>
	<li>Gently apply either the fusogenic cover glass (described in section 2), or the dry acid-cleaned cover glass (described in section 1) to the dish in order to cover the hole surrounded by elastomer. Ensure that the cover glass appears flush with the bottom of the dish and extends beyond the diameter of the hole so that a substantial portion of the glass is in contact with the plastic. Cure the elastomer by baking at 50 &#176;C for 2 - 3 h.</li>
	<li>If fusogenic glass is preferred, UV sterilize the dish and culture cells according to standard protocols. However, if a micropattern is preferred, proceed to step 3.2 for micropattern preparation (the gas plasma used during micropatterning sterilizes the dish and strongly couples PDMS to glass).</li>
</ol>
5. Collecting Thioglycollate-elicited Macrophages
<ol>
	<li>Inject 8-week-old C57BL/6 mice with 0.5 mL of a sterile solution of 4% Brewer&#39;s thioglycollate as previously described3,4,6.</li>
	<li>Seventy-two hours later, euthanize the animal according to approved animal care and use guidelines, and collect macrophages by peritoneal lavage with ice-cold phosphate-buffered saline supplemented with 5 mM ethylenediaminetetraacetate.</li>
	<li>Centrifuge the macrophages at 300 x g for 3 min and resuspend in 1 mL of DMEM:F12 supplemented with 15 mM HEPES, 10% FBS, and 1% antibiotics (culture medium). 
	NOTE: The cells are subsequently counted with a Neubauer hemocytometer. Macrophages are diluted to the appropriate concentration and applied to the surfaces. The number of cells to apply to a given surface should be carefully considered by the investigator for the purpose of the experimental question. Consult known standards in the primary literature.</li>
	<li>After 30 min wash the surfaces with HBSS supplemented with 0.1% BSA to remove non-adherent cells, and replace with fresh culture medium. Return the cultures to the incubator (5% CO2 in air at 37 &#176;C).</li>
	<li>2 h later, aspirate the medium and replace with culture medium supplemented with 10 ng/mL of IL-4. Image the cells as described elsewhere4.</li>
</ol>

<ol><li>McNally, A. K., Anderson, J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Interleukin-4+induces+foreign+body+giant+cells+from+human+monocytes%2Fmacrophages.+Differential+lymphokine+regulation+of+macrophage+fusion+leads+to+morphological+variants+of+multinucleated+giant+cells%5BTitle%5D)+AND+%22Am+J+Pathol%22%5BJournal%5D)">Interleukin-4 induces foreign body giant cells from human monocytes/macrophages. Differential lymphokine regulation of macrophage fusion leads to morphological variants of multinucleated giant cells.</a> Am J Pathol. 147 (5), 1487(1995).</li>
<li>Helming, L., Gordon, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Molecular+mediators+of+macrophage+fusion%5BTitle%5D)+AND+%22Trends+Cell+Biol%22%5BJournal%5D)">Molecular mediators of macrophage fusion.</a> Trends Cell Biol. 19 (10), 514-522 (2009).</li>
<li>Podolnikova, N. P., Kushchayeva, Y. S., Wu, Y., Faust, J., Ugarova, T. P. <a target="_blank" href="https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4973655/">The Role of Integrins α M β 2 (Mac-1, CD11b/CD18) and α D β 2 (CD11d/CD18) in Macrophage Fusion.</a> Am J Pathol. 186 (8), 2105-2116 (2016).</li>
<li>Faust, J. J., Christenson, W., Doudrick, K., Ros, R., Ugarova, T. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Development+of+fusogenic+glass+surfaces+that+impart+spatiotemporal+control+over+macrophage+fusion%3A+Direct+visualization+of+multinucleated+giant+cell+formation%5BTitle%5D)+AND+%22Biomaterials%22%5BJournal%5D)">Development of fusogenic glass surfaces that impart spatiotemporal control over macrophage fusion: Direct visualization of multinucleated giant cell formation.</a> Biomaterials. 128, 160-171 (2017).</li>
<li>Jenney, C. R., Anderson, J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Alkylsilane-modified+surfaces%3A+Inhibition+of+human+macrophage+adhesion+and+foreign+body+giant+cell+formation%5BTitle%5D)+AND+%22J+Biomed+Mater+Res%22%5BJournal%5D)">Alkylsilane-modified surfaces: Inhibition of human macrophage adhesion and foreign body giant cell formation.</a> J Biomed Mater Res. 46 (1), 11-21 (1999).</li>
<li>Vignery, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Methods+to+fuse+macrophages+in+vitro%5BTitle%5D)+AND+%22Cell+Fusion%3A+Overviews+Methods%22%5BJournal%5D)">Methods to fuse macrophages in vitro.</a> Cell Fusion: Overviews Methods. , 383-395 (2008).</li>
<li>Zhao, Q., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Foreign-body+giant+cells+and+polyurethane+biostability%3A+In+vivo+correlation+of+cell+adhesion+and+surface+cracking%5BTitle%5D)+AND+%22J+Biomed+Mater+Res%22%5BJournal%5D)">Foreign-body giant cells and polyurethane biostability: In vivo correlation of cell adhesion and surface cracking.</a> J Biomed Mater Res. 25 (2), 177-183 (1991).</li>
<li>Anderson, J. M., Rodriguez, A., Chang, D. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Foreign+body+reaction+to+biomaterials%5BTitle%5D)+AND+%22Semin+Immunol%22%5BJournal%5D)">Foreign body reaction to biomaterials.</a> Semin Immunol. 20 (2), 86-100 (2008).</li>
<li>Jenney, C. R., Anderson, J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Effects+of+surface-coupled+polyethylene+oxide+on+human+macrophage+adhesion+and+foreign+body+giant+cell+formation+in+vitro%5BTitle%5D)+AND+%22J+Biomed+Mater+Res%22%5BJournal%5D)">Effects of surface-coupled polyethylene oxide on human macrophage adhesion and foreign body giant cell formation in vitro.</a> J Biomed Mater Res. 44 (2), 206-216 (1999).</li>
<li>DeFife, K. M., Colton, E., Nakayama, Y., Matsuda, T., Anderson, J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Spatial+regulation+and+surface+chemistry+control+of+monocyte%2Fmacrophage+adhesion+and+foreign+body+giant+cell+formation+by+photochemically+micropatterned+surfaces%5BTitle%5D)+AND+%22J+Biomed+Mater+Res%22%5BJournal%5D)">Spatial regulation and surface chemistry control of monocyte/macrophage adhesion and foreign body giant cell formation by photochemically micropatterned surfaces.</a> J Biomed Mater Res. 45 (2), 148-154 (1999).</li>
<li>Jenney, C. R., DeFife, K. M., Colton, E., Anderson, J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Human+monocyte%2Fmacrophage+adhesion%2C+macrophage+motility%2C+and+IL-4-induced+foreign+body+giant+cell+formation+on+silane-modified+surfaces+in+vitro%5BTitle%5D)+AND+%22J+Biomed+Mater+Res%22%5BJournal%5D)">Human monocyte/macrophage adhesion, macrophage motility, and IL-4-induced foreign body giant cell formation on silane-modified surfaces in vitro.</a> J Biomed Mater Res. 41 (2), 171-184 (1998).</li>
<li>Hell, S. W., Wichmann, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Breaking+the+diffraction+resolution+limit+by+stimulated+emission%3A+stimulated-emission-depletion+fluorescence+microscopy%5BTitle%5D)+AND+%22Opt+Lett%22%5BJournal%5D)">Breaking the diffraction resolution limit by stimulated emission: stimulated-emission-depletion fluorescence microscopy.</a> Opt Lett. 19 (11), 780-782 (1994).</li>
<li>van de Linde, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Direct+stochastic+optical+reconstruction+microscopy+with+standard+fluorescent+probes%5BTitle%5D)+AND+%22Nat+Protocols%22%5BJournal%5D)">Direct stochastic optical reconstruction microscopy with standard fluorescent probes.</a> Nat Protocols. 6 (7), 991-1009 (2011).</li>
<li>Fölling, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Fluorescence+nanoscopy+by+ground-state+depletion+and+single-molecule+return%5BTitle%5D)+AND+%22Nat+Methods%22%5BJournal%5D)">Fluorescence nanoscopy by ground-state depletion and single-molecule return.</a> Nat Methods. 5 (11), 943-945 (2008).</li>
<li>Heilemann, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Subdiffraction-resolution+fluorescence+imaging+with+conventional+fluorescent+probes%5BTitle%5D)+AND+%22Ange+Chem+Int+Edit%22%5BJournal%5D)">Subdiffraction-resolution fluorescence imaging with conventional fluorescent probes.</a> Ange Chem Int Edit. 47 (33), 6172-6176 (2008).</li>
<li>Betzig, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Proposed+method+for+molecular+optical+imaging%5BTitle%5D)+AND+%22Optics+Letters%22%5BJournal%5D)">Proposed method for molecular optical imaging.</a> Optics Letters. 20 (3), 237-239 (1995).</li>
<li>Betzig, E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Imaging+intracellular+fluorescent+proteins+at+nanometer+resolution%5BTitle%5D)+AND+%22Science%22%5BJournal%5D)">Imaging intracellular fluorescent proteins at nanometer resolution.</a> Science. 313 (5793), 1642-1645 (2006).</li>
<li>Shtengel, G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Interferometric+fluorescent+super-resolution+microscopy+resolves+3D+cellular+ultrastructure%5BTitle%5D)+AND+%22P+Natl+Acad+Sci+U+S+A%22%5BJournal%5D)">Interferometric fluorescent super-resolution microscopy resolves 3D cellular ultrastructure.</a> P Natl Acad Sci U S A. 106 (9), 3125-3130 (2009).</li>
<li>Shtengel, G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Imaging+cellular+ultrastructure+by+PALM%2C+iPALM%2C+and+correlative+iPALM-EM%5BTitle%5D)+AND+%22Method+Cell+Biol%22%5BJournal%5D)">Imaging cellular ultrastructure by PALM, iPALM, and correlative iPALM-EM.</a> Method Cell Biol. 123, 273-294 (2013).</li>
<li>Chen, B. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Lattice+light-sheet+microscopy%3A+Imaging+molecules+to+embryos+at+high+spatiotemporal+resolution%5BTitle%5D)+AND+%22Science%22%5BJournal%5D)">Lattice light-sheet microscopy: Imaging molecules to embryos at high spatiotemporal resolution.</a> Science. 346 (6208), 1257998(2014).</li>
<li>Planchon, T. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Rapid+three-dimensional+isotropic+imaging+of+living+cells+using+Bessel+beam+plane+illumination%5BTitle%5D)+AND+%22Nat+Methods%22%5BJournal%5D)">Rapid three-dimensional isotropic imaging of living cells using Bessel beam plane illumination.</a> Nat Methods. 8 (5), 417-423 (2011).</li>
</ol>

The authors declare that they have no competing financial interests.

The need to identify and subsequently develop optical-quality glass surfaces that promote macrophage fusion stemmed from the fact that until recently no published study directly visualized macrophage fusion in the context of living specimens3,4. This is due to the fact that fusogenic plastic surfaces that are commonly used require LWD objectives and are largely limited to phase contrast optics. These barriers were overcome by engineering an optical-quality glass ...

The formation of MGCs accompanies a number of pathological states in the human body distinguished by chronic inflammation1. Despite agreement that mononucleated macrophages fuse to form MGCs2, surprisingly few studies have shown fusion in context with living specimens3,4. This is because clean glass surfaces that are required for most imaging techniques do not promote macrophage fusion when induced by inflammatory cytokines5. Indeed, if clean glass is used as a substrate for macrophage fusion, then low to intermediate magnification objectives (i.e., 10 - 20X) and more than 15 h of continuous imaging are often required to observe a single fusion event.
On the other hand, fusogenic plastic surfaces (e.g., permanox) or bacteriological grade plastic promote fusion2. However, imaging through plastic is problematic because the substrate is thick and scatters light. This complicates imaging since long working distance (LWD) objectives are required. However, LWD objectives usually have low light gathering capacity compared to their coverslip-corrected counterpart. Further, techniques that exploit changes in the polarity of light passing through the specimen such as differential interference contrast are impossible since plastic is birefringent. The barriers associated with the use of plastic are further underscored by the fact that it is impossible to predict where macrophage fusion/MGC formation will occur on the surface. Together, these limitations restrict the visualization of macrophage fusion to phase contrast optics, extended total imaging durations (&#62;15 continuous hours), and low resolution.
We recently identified a highly fusogenic glass surface while conducting single-molecule super resolution microscopy with fixed macrophages/MGCs4. This observation was surprising because clean glass surfaces promote fusion at the very low rate of ~ 5% after 24 h in the presence of interleukin-4 (IL-4) as determined by the fusion index4. We found that the capacity to promote fusion was due to oleamide contamination. Adsorption of oleamide or other compounds that similarly contained long-chain hydrocarbons made the glass fusogenic. The most fusogenic compound (paraffin wax) was micropatterned, and it imparted a high degree of spatiotemporal control over macrophage fusion and a 2-fold increase in the number of fusion events observed within the same amount of time compared to permanox. These optical-quality surfaces provided the first glimpse into the morphological features and kinetics that govern the formation of MGCs in living specimens.
In this protocol we describe the fabrication of a variety of glass surfaces that can be used to monitor the formation of MGCs from living specimens. In addition, we show that these surfaces are amenable to far-field super-resolution techniques. Surface fabrication is dependent on the goal of the experiment, and each surface is described with related examples in the proceeding text.

<table><tbody><tr><td>Plasma cleaner</td><td>Harrick Plasma</td><td>PCD-32G</td><td></td></tr><tr><td>Finder grid</td><td>Electron microscopy sciences</td><td>G400F1-Au</td><td>any gold TEM grid will work</td></tr><tr><td>Cover glass (22x22 mm)</td><td>Thor Labs</td><td>CG15CH</td><td>use only high stringency cover glass</td></tr><tr><td>Paraffin wax</td><td>Sigma Aldrich</td><td>17310</td><td></td></tr><tr><td>Petrolatum</td><td>Sigma Aldrich</td><td>16415</td><td>must be &amp;alpha;-tocopherol-free if substituted</td></tr><tr><td>Oleamide</td><td>Sigma Aldrich</td><td>O2136</td><td>prepare fresh</td></tr><tr><td>Isopropanol</td><td>Sigma Aldrich</td><td>278475</td><td></td></tr><tr><td>Toluene</td><td>Sigma Aldrich</td><td>244511</td><td></td></tr><tr><td>Acetone</td><td>VWR International</td><td>BDH1101</td><td></td></tr><tr><td>Ethanol</td><td>Electron microscopy sciences</td><td>15050</td><td>use low dissolved solids ethanol</td></tr><tr><td>Hydrochloric acid</td><td>Fischer Scientific</td><td>A144C-212</td><td>use to acid wash cover glass</td></tr><tr><td>Slyguard 184</td><td>VWR International</td><td>102092-312</td><td>mix in a 1:10 ratio and cure at 50 &amp;deg;C for 4 h</td></tr><tr><td>35 mm petri dish</td><td>Santa Cruz Biotech</td><td>sc-351864</td><td></td></tr><tr><td>Dumont no. 5 forceps</td><td>Electron microscopy sciences</td><td>72705</td><td>ideal for removing TEM grid in section 3.5</td></tr><tr><td>FBS</td><td>Atlanta Biological</td><td>S11550</td><td></td></tr><tr><td>DMEM:F12</td><td>Corning</td><td>10-092</td><td>contains 15 mM HEPES</td></tr><tr><td>Pen/Strept</td><td>Corning</td><td>30-002-Cl</td><td></td></tr><tr><td>HBSS</td><td>Corning</td><td>21-023</td><td></td></tr><tr><td>BSA solution</td><td>Sigma Aldrich</td><td>A9576</td><td>use at 0.1% in HBSS to wash non-adherent macrophages</td></tr><tr><td>IL-4</td><td>Genscript</td><td>Z02996</td><td>aliquot at 10 &amp;mu;g/mL and store at -20 &amp;deg;C</td></tr><tr><td>C57BL/6J</td><td>Jackson Laboratory</td><td>000664</td><td>use for fixed samples or techniques that do not require contrast agents</td></tr><tr><td>eGFP-LifeAct mice</td><td>n/a</td><td>n/a</td><td>use for live fluorescence imaging</td></tr><tr><td>Kimwipe</td><td>Kimberly Clark&amp;nbsp;</td><td>34155</td><td>use to polish hydrocarbon adsorbed surfaces</td></tr></tbody></table>

fabricating optical-quality glass surfaces to study macrophage fusion

Fabricating Optical-quality Glass Surfaces to Study Macrophage Fusion

Visualizing the formation of multinucleated giant cells (MGCs) from living specimens has been challenging due to the fact that most live imaging techniques require propagation of light through glass, but on glass macrophage fusion is a rare event. This protocol presents the fabrication of several optical-quality glass surfaces where adsorption of compounds containing long-chain hydrocarbons transforms glass into a fusogenic surface. First, preparation of clean glass surfaces as starting material for surface modification is described. Second, a method is provided for the adsorption of compounds containing long-chain hydrocarbons to convert non-fusogenic glass into a fusogenic substrate. Third, this protocol describes fabrication of surface micropatterns that promote a high degree of spatiotemporal control over MGC formation. Finally, fabricating glass bottom dishes is described. Examples of use of this in vitro cell system as a model to study macrophage fusion and MGC formation are shown.

Physicochemical parameters of materials have dramatic effects on the extent of macrophage fusion7,8,9,10. Moreover, surface contaminants are known to promote macrophage fusion11. Therefore, it is important to start with clean cover glass as a negative control for macrophage fusion. When cleaned as described in protocol 1, the cover glass ...

This protocol describes the fabrication of optical-quality glass surfaces adsorbed with compounds containing long-chain hydrocarbons that can be used to monitor macrophage fusion of living specimens and enables super-resolution microscopy of fixed specimens.

Visualizing the formation of multinucleated giant cells (MGCs) from living specimens has been challenging due to the fact that most live imaging ...

fabricating-optical-quality-glass-surfaces-to-study-macrophage-fusion

Research

JoVE Journal

Immunology and Infection

Source: Lê-Bury, G., et al. Phagosome Migration and Velocity Measured in Live Primary Human Macrophages Infected with HIV-1. J. Vis. Exp. (2016)This video demonstrates live confocal imaging of HIV-1-infected human macrophages to visualize and quantify phagosome migration using GFP fluorescence and bright field tracking, providing insights into how HIV alters intracellular trafficking during Fc receptor–mediated phagocytosis.

Live Imaging of Phagosome Migration in HIV-1-Infected Human Macrophages

This video demonstrates an assay to monitor independent macrophage-mediated red blood cell (RBC) phagocytosis events. Mouse immunoglobulin G (IgG)-opsonized human RBCs are incubated with mouse macrophages and observed under a confocal microscope. The RBCs are engulfed by macrophages via a phagocytic cup formation and targeted for lysosomal degradation.

Real-Time Imaging of Macrophage Phagocytosis of IgG-Opsonized Red Blood Cells

This video demonstrates a high-resolution total internal reflection fluorescence (TIRF) microscopy technique for real-time visualization of phagosome formation and closure during macrophage-mediated phagocytosis of IgG-opsonized red blood cells (RBCs) attached to the surface of a glass bottom dish. The macrophages extend pseudopodia around the RBCs and engulf them inside the phagosomes, detaching them from the glass surface.

TIRF Microscopy-Based Visualization of Phagosome Formation and Closure

Phagocytic cells play a major role in the innate immune system by removing and eliminating invading microorganisms in their phagosomes. Phagosome ...

Study of Phagolysosome Biogenesis in Live Macrophages

This protocol describes customizable surface functionalization of the desthiobiotin, streptavidin, and APTES system in order to isolate specific cell types of interest. In addition, this manuscript covers the applications, optimization, and verification of this process.

A Method of Targeted Cell Isolation via Glass Surface Functionalization

We describe an experimental setup to visualize with unprecedented high resolution phagosome formation and closure in three dimensions in living macrophages, using total internal reflection fluorescence microscopy. It allows monitoring of the base of the phagocytic cup, the extending pseudopods, as well as the precise site of phagosome scission.

"Phagosome Closure Assay" to Visualize Phagosome Formation in Three Dimensions Using Total Internal Reflection Fluorescent Microscopy (TIRFM)

Here we describe methods using spinning disk confocal microscopy to image single phagocytic events by mouse resident peritoneal macrophages. The protocols can be extended to other phagocytic cells.

Time-lapse 3D Imaging of Phagocytosis by Mouse Macrophages

This protocol provides researchers with a rapid, indirect method of measuring TLR-dependent NF-кB/AP-1 transcription factor activity in a murine macrophage cell line in response to a variety of polymeric surfaces and adsorbed protein layers that model the biomaterial implant microenvironment.

A Macrophage Reporter Cell Assay to Examine Toll-Like Receptor-Mediated NF-kB/AP-1 Signaling on Adsorbed Protein Layers on Polymeric Surfaces

This protocol describes the fabrication of an implantable integrated imaging window using 3D laser printing. The window consists of a system of microlenses coupled with micro-scaffolds. The method involves two-photon polymerization (2PP) of the biocompatible photoresist SZ2080 in a continuous sequence, optimizing manufacturing efficiency and alignment between the different components.

Microfabrication of Implantable Optics Integrated in a Microstructured Imaging Window for Advanced In Vivo Imaging

Glass wool filters have been used to concentrate waterborne viruses by a number of research groups around the world. Here we show a simple approach for constructing glass wool filters and demonstrate the filters are also effective in concentrating waterborne viral, bacterial and protozoan pathogens.

Glass Wool Filters for Concentrating Waterborne Viruses and Agricultural Zoonotic Pathogens

Learn how to fabricate optical-quality glass surfaces for studying macrophage fusion using live imaging and super-resolution microscopy. This protocol transforms cover glass into fusogenic surfaces to investigate immune cell behavior.

Fabricating Optical-quality Glass Surfaces to Study Macrophage Fusion

Explore More Videos