Name: Measurement of Ultrafast Vibrational Coherences in Polyatomic Radical Cations with Strong-Field Adiabatic Ionization (Video) | JoVE Journal
Uploaded: 2018-08-06T15:00:00.000+00:00
Duration: 8 min 22 s
Description: Learn ultrafast vibrational coherence measurement in polyatomic radical cations using strong-field adiabatic ionization. This method resolves coherent motions by preparing cations in the ground electronic state.

ai_agent_IP

ai_agent

maintenance

instantTrialDurationMinutes

isBiopharma

enableNewMyJoveSectionDesign

educationFeatures

seoMetaApi

ai_copilot_institution_blacklist

ai_chat_institution_blacklist

freeAccessWindow

ssoRoleCapture

scheduledMaintenanceBanner

joveLabsFeatures

disable_autoplay_for_bots

extended_trial_duration

5 minutes

This work was supported by the U.S. Army Research Office through Contract W911NF-18-1-0051.

NOTE: All commercially acquired instruments and parts such as the laser, vacuum pumps, chamber, time-of-flight tube and microchannel plate detector were installed and operated according to the manufacturer&#8217;s instructions or user&#8217;s manual. Laser safety goggles designed for the operating laser intensities and wavelengths should be worn.
1. Construction of TOF-MS26
<ol>
	<li>Design and build an ultrahigh vacuum (UHV) chamber that has enough space to accommodate a standard stack of ion optics26 and provisions to mount optical windows on 2 &#190;&#8221; flanges on either side of the ion optics (Figure 1).</li>
	<li>Attach the stack of ion optics mounted on a 1-m flight tube to the chamber. 
	Note: To save space on the optical table, it is easiest to mount the ion optics and flight tube vertically.</li>
	<li>Insert a 1/16&#8221; stainless steel tube into the chamber between the extractor and repeller plates, thread the tube out of the chamber, and connect it to &#188;&#8221; stainless steel tubing27. Attach one or more variable leak valves to the &#188;&#8221; stainless steel tubing. 
	Note: Glass tubes containing molecular samples or gas tanks may be attached to this tubing for sample inlet.</li>
	<li>Attach an 18-mm microchannel plate stack in Z-stack configuration29 on the end of the flight tube.</li>
	<li>Attach two optical windows (1 mm thickness, 50 mm diameter, fused silica) mounted on 2 &#190;&#8221; flanges to the chamber. 
	Note: The laser beams propagate through these two windows through the space between the repeller and extractor plates.</li>
	<li>Wire the ion optics and the detector to high-voltage power supplies via current feedthroughs and BNC cables.</li>
	<li>Attach one turbomolecular pump to the chamber near the ion optics and a second pump to the end of the flight tube near the detector (Figure 1). Connect both pumps to an appropriate backing pump. 
	CAUTION: When attaching a turbomolecular pump to the end of a vertically-mounted flight tube, take care to ensure that the TOF system does not lean to one side due to the weight of the pump. This issue can be mitigated by attaching the vacuum chamber to the optical table.</li>
	<li>Turn on the pumps and wait 24 h. The pressure in the chamber should be below 10-8 torr with no sample. If pressure is high, check for leaks and tighten the nuts or bake the chamber until desired pressure is reached.</li>
</ol>
2. Construction of Optical Pump and Probe Paths
Note: A diagram of the pump and the probe optical paths is given in Figure 1.
<ol>
	<li>Provision of femtosecond laser pulses 
	note: Femtosecond laser pulses (800 nm) were provided by a commercial Ti:Sapphire regenerative amplifier source operated according to the manufacturer&#8217;s manual.
	<ol>
		<li>Turn the laser on and wait for about 30 min for it to stabilize.</li>
		<li>Position a 90:10 (%R:%T) beam splitter after the laser output to generate two replica, which will be used to construct the pump and probe beam lines. Check the laser power of both replicas to ensure adequate power delivery.</li>
		<li>Direct the reflected beam into the optical parametric amplifier (OPA) and optimize the output power using the procedures in the manual.</li>
	</ol>
	</li>
	<li>Preparation of the pump optical path
	<ol>
		<li>Set the OPA software to select the desired wavelength.</li>
		<li>Direct the output beam from the OPA through the &#955;/2 wave plate (WP) and polarizer (P).</li>
		<li>Block the p-polarized beam and direct the s-polarized beam to the concave (f = -10 cm) and convex (f = 50 cm) mirrors to expand its diameter by a factor of 5.</li>
		<li>Direct the expanded beam to the dichroic mirror (DC).</li>
	</ol>
	</li>
	<li>Preparation of the probe optical path
	<ol>
		<li>Direct the beam that passes through the 90:10 beam splitter to the convex mirror (f = 20 cm) and concave mirror (f = -10 cm) to reduce its diameter by a factor of 2.</li>
		<li>Direct the down-collimated beam to a hollow retro-reflector mounted on a motorized linear delay stage. Adjust the mounting knobs of the two flat mirrors prior to the retro-reflector to ensure that the beam position after the retro-reflector does not change when the stage is moved along its full travel range. 
		Note: This ensures that the pump-probe spatial overlap will be maintained over the full scan range.</li>
		<li>Insert a tunable neutral density (ND) filter after the delay stage to attenuate the power of the probe pulse, insert an iris after the ND filter to adjust the beam diameter, and direct the beam to the dichroic mirror (DC).</li>
	</ol>
	</li>
	<li>Measurement of pump and probe pulse durations 
	Note: The durations of the pump and probe pulses are measured with a home-built second harmonic generation-frequency resolved optical gating (SHG-FROG) setup. Details on the construction of a SHG-FROG setup, measurement process, and data retrieval algorithms are described elsewhere30,31,32. In our experiments, pulse durations out of the OPA are typically around 20 fs and that of the 800 nm pulse around 30 fs19,20,27. However, OPAs can introduce higher-order pulse distortions, so it may be necessary to implement pulse-compression using, for instance, chirped mirrors10,11,12,13 or an acousto-optic modulator16.
	<ol>
		<li>Block either the pump or probe beam. Direct the remaining beam into the FROG with flat mirrors placed after the dichroic mirror that combines the pump and probe pulses.</li>
		<li>Ensure that the two beam replicates in the FROG overlap in the &#946;-barium-borate (BBO) crystal. Adjust the beam alignment and delay stage until a third beam is visible between the two original beams.</li>
		<li>With an iris and a f = 10 cm lens, isolate and focus the beam into a fiber-optic mount connected to the spectrometer and computer.</li>
		<li>Collect the FROG scan and retrieve the pulse shape with the appropriate software and retrieval algorithm.</li>
		<li>Repeat steps 2.4.1-2.4.3 for the other beam. Remove the mirrors directing beams to the FROG.</li>
	</ol>
	</li>
	<li>Rough spatial overlap of the pump and probe beams 
	Note: If both pump and probe beams are visible, step 2.5.1 may be skipped.
	<ol>
		<li>Insert a 15 mm-diameter BBO crystal after the dichroic to double the wavelengths of both beams, thereby making them visible. 
		Note: It is easiest to use an OPA wavelength of ~1200-1300 nm for this step to make an orange 600-650 nm beam that is easily distinguishable from the blue 400 nm probe beam. Take care to ensure that the most intense region of the pump beam passes through the center of the crystal. The crystal angle should be optimized such that both the orange and blue pulses are easily visible, although this angle may not correspond to the maximum intensity of a given color.</li>
		<li>Adjust the pump and probe beam alignments using the mirror mounts prior to the dichroic such that the beams propagate collinearly through the TOF-MS chamber and out from the other side. 
		Note: The probe beam has a smaller diameter and should be centered in the middle of the pump beam.</li>
	</ol>
	</li>
	<li>Rough temporal overlap of pump and probe beams 
	Note: The method described here is limited to the oscilloscope resolution and can only determine the zero-delay position to within several millimeters of travel on the delay stage.
	<ol>
		<li>Place a fast photodiode detector a few centimeters in front of the window entrance to the TOF-MS chamber in the path of the pump and probe beams. Attach the detector cable to a digital oscilloscope and independently locate the signals of the pump and probe pulses.</li>
		<li>Adjust the position of the motorized delay stage on the probe line such that the pump and probe signals in the oscilloscope are temporally overlapped. If one signal is consistently in front (behind) the other in the oscilloscope, move the mounts holding the motorized delay stage to shorten or lengthen the path length as needed.</li>
		<li>Remove the photodiode detector.</li>
	</ol>
	</li>
</ol>
3. Preliminary Measurements
Note: All data in our experiments were acquired using codes written in-house with commercial instrument control software (Table of Materials). All instrument driver software was obtained from the respective manufacturer.
<ol>
	<li>Calibration of absolute peak intensity of the pump pulse28
	<ol>
		<li>Block the probe beam and insert a f = 20 cm lens mounted on a manual linear translation stage directly before the entrance window to the mass spectrometer.</li>
		<li>Adjust the wave plate (WP) rotation angle (Figure 1) to maximize the power of the pump beam measured before the lens.</li>
		<li>Attach a tank of Xe gas to the TOF-MS chamber inlet and adjust the leak valve controlling gas flow into the chamber such that the pressure gauge reads between 5-10 x 10-8 torr. Ensure that the TOF-MS power supply voltages are off when adjusting sample pressure to avoid damage to the MCP detector due to pressure spikes.</li>
		<li>Connect the output cables from the MCP detector and from the laser signal delay generator to a digital oscilloscope. Set the oscilloscope to trigger off the laser signal.</li>
		<li>Turn on the TOF-MS power supply and check the voltages. Typical values of the voltages for V1, V2, V3, and V4 (Figure 2) are +4,190 V, +3,910 V, 0 V, and -3,000 V, respectively.</li>
		<li>Check for ion signals of Xe+ (and higher charge states) in the oscilloscope directly or via a computer connected to the oscilloscope.</li>
		<li>Adjust the position of the manual translation stage holding the lens to maximize the total ion signal. This step ensures that the pump beam focus overlaps with the 0.5 mm slit shown in Figure 2.</li>
		<li>Record the Xe mass spectrum using the data acquisition software.</li>
		<li>Decrease the laser power by rotating the WP angle to obtain a power ~20 mW lower than the previously measured power.</li>
		<li>Repeat steps 3.1.8-3.1.9 until the laser power is too low to generate measurable Xe+ signal. A total of 10-15 mass spectra at different laser powers should be recorded.</li>
		<li>Using appropriate data analysis software, follow the steps in reference 28 to identify the laser pulse energy corresponding to the absolute saturation intensity for Xe+ (1.12 x 1014 W cm-2)28. This procedure provides an absolute intensity scale for any pump pulse energy used in further experiments.</li>
	</ol>
	</li>
	<li>Calibration of absolute peak intensity of the probe pulse33 
	Note: Due to the weak probe pulse intensity, the Xe calibration method described in step 3.1 cannot be used. Instead, the probe intensity in the experiments may be estimated by measuring the spot size at the focal point with a digital camera32, along with the pulse duration and energy.
	<ol>
		<li>Block the pump beam and direct the probe beam along a straight path after the dichroic mirror using two flat mirrors.</li>
		<li>Remove the focusing lens from its position adjacent to the chamber and place it in the probe beam path, ensuring that the probe beam passes through its center.</li>
		<li>Minimize the probe beam energy using the variable ND filter and add additional ND filters to attenuate the pulse energy below ~100 nJ.</li>
		<li>Place a compact CMOS camera on a manual linear translation stage and connect it to a computer with suitable data acquisition software. Mount the translation stage in the probe beam path with the camera centered near the focal spot of the beam. Locate the beam spot using the software program. Add ND filters and adjust the camera acquisition settings to prevent saturation of the CMOS detector.</li>
		<li>Adjust the position of the translation stage to obtain the smallest, most intense laser spot. This location corresponds to the focus of the beam.</li>
		<li>Acquire a camera image at the focus and fit the spot to a two-dimensional Gaussian function using appropriate data analysis software to determine the beam diameter.</li>
		<li>Remove the mirrors directing the probe beam to the camera and return the focusing lens to its position in front of the TOF-MS.</li>
	</ol>
	</li>
	<li>Determination of pump-probe spatial and temporal overlap in the TOF-MS 
	Note: The completion of the protocol in step 3.1 is assumed. While Xe gas could be used as the sample to determine spatial and temporal overlap, it is recommended to use the target molecule for study because changes in the mass spectrum can be observed over a range of positive time-delays instead of only at zero time-delay, as with Xe.
	<ol>
		<li>Connect the desired sample to the TOF-MS chamber and adjust the pressure to the range of 1-5 x 10-7 torr.</li>
		<li>Unblock the pump and probe beams and ensure that they are aligned into the TOF-MS chamber.</li>
		<li>Maximize the probe power by adjusting the ND filter. Set the pump power with the waveplate to a sufficiently high level to obtain satisfactory ion signal. 
		Note: The probe power should be sufficiently high to induce fragmentation but not so high as to create ions in the absence of the pump pulse.</li>
		<li>Adjust the spatial position of the probe beam with the knobs on the dichroic mirror mount (DC, Figure 1) until either a spike in intensity of all ions is observed (if the stage position is exactly at zero delay) or a significant depletion of the parent molecular ion and/or increase in fragment ion yields are observed (if the stage position corresponds to a positive time-delay).</li>
		<li>If no changes in the ion signals are observed, the stage position is likely at negative time-delay, i.e., probe precedes pump. Adjust the motorized delay stage to a longer path for the probe beam and repeat step 3.3.4 until a change in the mass spectrum is observed.</li>
		<li>Adjust the motorized delay stage position to produce a spike in total ion signal. This position corresponds to zero time-delay. Representative mass spectra of the molecule DMMP taken at zero time-delay with good and poor spatial overlap, along with the mass spectrum taken with only the pump beam, are shown in Figure 3.</li>
	</ol>
	</li>
	<li>Cross-correlation6,34 
	Note: The cross-correlation measurement must be performed on an inert gas such as Xe32. It serves to verify both the pulse durations measured with FROG and the delay stage position corresponding to zero time-delay.
	<ol>
		<li>With Xe gas in the chamber (step 3.1) and the beam overlap optimized (step 3.3), move the motorized stage position to locate zero time-delay (i.e., when Xe+ signal is maximized).</li>
		<li>Scan the motorized translation stage over the delay range of -200 fs to +200 fs in steps of 5 fs. This scan corresponds to steps of 1.5 &#181;m over a range of 120 &#181;m centered at the zero time-delay position. Record mass spectrum at each scan position and integrate Xe+ yields to acquire the time-dependent ion signal34.</li>
	</ol>
	</li>
</ol>
4. Pump-probe Measurements
<ol>
	<li>Preliminary checks before taking measurements
	<ol>
		<li>Check the experimental setup to confirm that both beams are propagating collinearly through the window of the chamber (Figure 1).</li>
		<li>Attach the desired sample to the TOF-MS chamber and gradually release the sample into the chamber using variable leak valve(s) to achieve a target pressure of 1-5 x 10-7 torr. Ensure that the TOF-MS power supply voltages are turned off when adjusting the sample pressure to avoid damage to the MCP detector due to pressure spikes.</li>
		<li>If the vapor pressure of the molecule is too low to produce the desired pressure, gently heat the sample holder until desired pressure is achieved.</li>
		<li>Turn on and check TOF-MS voltages (step 3.1.5). Verify the operability of the data acquisition software with respect to the communication with both the motorized delay stage and oscilloscope.</li>
		<li>Adjust the lens in front of the chamber (step 3.1.7) and pump-probe spatial alignment (step 3.3.4) to optimize ion signal and spatial overlap.</li>
	</ol>
	</li>
	<li>Data acquisition
	<ol>
		<li>Adjust the pump and probe pulse energies to obtain desired ion signals.</li>
		<li>In the data acquisition software, specify the scan length and step size. 
		Note: Typical scan lengths in our experiments range from 1000-5000 fs and step sizes range from 5-20 fs19,20.</li>
		<li>Run the data acquisition software to acquire the mass spectrum at each pump-probe delay. 
		Note: Typically, the mass spectrum recorded at each time-delay in a scan is averaged over 1000 laser shots. To obtain sufficiently high signal-to-noise ratios, 10-20 scans are taken at the desired settings (i.e., scan length, step size, pump and probe powers) and averaged. To minimize the effects of laser power drift, scans may be taken in alternating directions of delay-stage travel. All data are saved as tab-delimited text files. Representative raw mass spectral data from a single scan taken on DMMP for a scan length of 1250 fs with step size of 5 fs are shown in Figure 4.</li>
	</ol>
	</li>
	<li>Data processing
	<ol>
		<li>Identify the flight time range for each mass peak of interest (illustrated by the bracketed regions in Figure 4) and integrate over these ranges in each mass spectrum. The outputs represent the time-resolved signals of each ion of interest. For example, time-resolved ion signals of DMMP parent molecular ion with good and poor pump-probe spatial overlap obtained from one pump-probe scan are shown in Figure 5.</li>
		<li>Repeat step 4.3.1 to obtain the desired number of scans (e.g., 10-20)19,20 at the same scan settings. Average each time-resolved ion signal over all scans taken. Representative averaged ion signals are shown in Figure 6.</li>
	</ol>
	</li>
</ol>

<ol><li>Letokhov, V. S. <a target="_blank" href="https://eric.ed.gov/?id=EJ161051">Photophysics and Photochemistry.</a> Physics Today. 30 (5), 23-32 (1977).</li>
<li>Bloembergen, N., Yablonovitch, E. <a target="_blank" href="http://optoelectronics.eecs.berkeley.edu/ey1978pt.pdf">Infrared laser induced unimolecular reactions.</a> Physics Today. 31 (5), 23-30 (1978).</li>
<li>Zewail, A. H. <a target="_blank" href="http://physicstoday.scitation.org/doi/abs/10.1063/1.2913821">Laser selective chemistry-is it possible?</a> Physics Today. 33 (11), 25-33 (1980).</li>
<li>Brif, C., Chakrabarti, R. L., Rabitz, H. <a target="_blank" href="https://arxiv.org/abs/0912.5121">Control of quantum phenomena: past, present and future.</a> New Journal of Physics. 12, 075008(2010).</li>
<li>Bloembergen, N., Zewail, A. H. <a target="_blank" href="https://pubs.acs.org/doi/abs/10.1021/j150667a004">Energy redistribution and the question of mode selective laser chemistry revisited.</a> The Journal of Physical Chemistry. 88 (23), 5459-5465 (1984).</li>
<li>Rosker, M. J., Dantus, M., Zewail, A. H. <a target="_blank" href="https://aip.scitation.org/doi/abs/10.1063/1.455427">Femtosecond real-time probing of reactions. I. The technique.</a> The Journal of Chemical Physics. 89 (10), 6113-6127 (1988).</li>
<li>Zewail, A. H. <a target="_blank" href="https://pubs.acs.org/doi/abs/10.1021/jp960658s">Femtochemistry: Recent progress in studies of dynamics and control of reaction and their transition states.</a> The Journal of Physical Chemistry. 100 (31), 12701-12724 (1996).</li>
<li>Warren, W. S., Rabitz, H., Dahleh, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Coherent+Control+of+Quantum+Dynamics%3A+The+Dream+Is+Alive%5BTitle%5D)+AND+%22Science%22%5BJournal%5D)">Coherent Control of Quantum Dynamics: The Dream Is Alive.</a> Science. 259 (5101), 1581-1589 (2003).</li>
<li>Kosma, K., Trushin, S. A., Fuß, W., Schmid, E. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Cyclohexadiene+ring+opening+observed+with+13+fs+resolution%3A+coherent+oscillations+confirm+the+reaction+path%5BTitle%5D)+AND+%22Physical+Chemistry+Chemical+Physics%22%5BJournal%5D)">Cyclohexadiene ring opening observed with 13 fs resolution: coherent oscillations confirm the reaction path.</a> Physical Chemistry Chemical Physics. 11 (1), 172-181 (2009).</li>
<li>De, S., Magrakvelidze, M., Bocharova, I. A., Ray, D., Cao, W., Znakovskaya, I., Li, H., Wang, Z., Laurent, G., Thumm, U., Kling, M. F., Litvinyuk, I. V., Ben-Itzhak, I., Cocke, C. L. <a target="_blank" href="https://journals.aps.org/pra/abstract/10.1103/PhysRevA.84.043410">Following dynamic nuclear wave packets in N, O and CO with few-cycle infrared pulses.</a> Physical Review A. 84 (4), 043410(2011).</li>
<li>Bryan, W. A., McKenna, J., English, E. M. L., Wood, J., Calvert, C. R., Torres, R., Murphy, D. S., Turcu, I. C. E., Collier, J. L., McCann, J. F., Williams, I. D., Newell, W. R. <a target="_blank" href="https://arxiv.org/abs/0711.0953">Isolated vibrational wavepackets in D: Defining superposition condition and wavepacket distinguishability.</a> Physical Review A. 76 (5), 053402(2007).</li>
<li>Calvert, C., Bryan, W., Newell, W., Williams, I. <a target="_blank" href="https://www.sciencedirect.com/science/article/pii/S0370157309002889">Time resolved studies of ultrafast wavepacket dynamics in hydrogen molecules.</a> Physics Reports. 491 (1), 1-28 (2010).</li>
<li>Kelkensberg, F., Lefebvre, C., Siu, W., Ghafur, O., Nguyen-Dang, T. T., Atabek, O., Keller, A., Serov, V., Johnsson, P., Swoboda, M., Remetter, T., L'Huillier, A., Zherebtsov, S., Sansone, G., Benedetti, E., Ferrari, F., Nisoli, M., Lépine, F., Kling, M. F., Vrakking, M. J. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Molecular+dissociative+ionization+and+wave-packet+dynamics+studied+using+two-color+XUV+and+IR+pump-probe+spectroscopy%5BTitle%5D)+AND+%22Physical+Review+Letters%22%5BJournal%5D)">Molecular dissociative ionization and wave-packet dynamics studied using two-color XUV and IR pump-probe spectroscopy.</a> Physical Review Letters. 103 (12), 123005(2009).</li>
<li>Erattupuzha, S., Larimian, S., Baltuska, A., Xie, X., Kitzler, M. <a target="_blank" href="https://aip.scitation.org/doi/full/10.1063/1.4939638">Two-pulse control over double ionization pathways in CO.</a> The Journal of Chemical Physics. 144 (2), 024306(2016).</li>
<li>Rudenko, A., Makhija, V., Vajdi, A., Ergler, T., Schurholz, M., Kushawaha, R. K., Ullrich, J., Moshammer, R., Kumarappan, V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Strong+field-induced+wave+packet+dynamics+in+carbon+dioxide+molecule%5BTitle%5D)+AND+%22Faraday+Discussions%22%5BJournal%5D)">Strong field-induced wave packet dynamics in carbon dioxide molecule.</a> Faraday Discussions. 194, 463-478 (2016).</li>
<li>Pearson, J. B., Nichols, S. R., Weinacht, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Molecular+fragmentation+driven+by+ultrafast+dynamic+ionic+resonances%5BTitle%5D)+AND+%22The+Journal+of+Chemical+Physics%22%5BJournal%5D)">Molecular fragmentation driven by ultrafast dynamic ionic resonances.</a> The Journal of Chemical Physics. 127 (13), 131101(2007).</li>
<li>Bohinski, T., Tibbetts, K. M., Tarazkar, M., Romanov, D. A., Matsika, S., Levis, R. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Strong+field+adiabatic+ionization+prepares+a+launch+state+for+coherent+control%5BTitle%5D)+AND+%22The+Journal+of+Physical+Chemistry+Letters%22%5BJournal%5D)">Strong field adiabatic ionization prepares a launch state for coherent control.</a> The Journal of Physical Chemistry Letters. 5 (24), 4305-4309 (2014).</li>
<li>Tibbetts, K. M., Tarazkar, M., Bohinski, T., Romanov, D. A., Matsika, S., Levis, R. J. <a target="_blank" href="http://iopscience.iop.org/article/10.1088/0953-4075/48/16/164002">Controlling the dissociation dynamics of acetophenone radical cation through excitation of ground and excited state wavepacket.</a> The Journal of Physics B: Atomic, Molecular, and Optical Physics. 48 (16), 164002(2015).</li>
<li>Ampadu Boateng, D., Gutsev, G. L., Jena, P., Tibbetts, K. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Ultrafast+coherent+vibrational+dynamics+dynamics+in+dimethyl+methylphosphonate+radical+cation%5BTitle%5D)+AND+%22Physical+Chemistry+Chemical+Physics%22%5BJournal%5D)">Ultrafast coherent vibrational dynamics dynamics in dimethyl methylphosphonate radical cation.</a> Physical Chemistry Chemical Physics. 20 (7), 4636-4640 (2018).</li>
<li>Ampadu Boateng, D., Gutsev, G. L., Jena, P., Tibbetts, K. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Dissociation+dynamics+of+3-+and+4-nitrotoluene+radical+cations%3A+Coherently+driven+C-NO+bond+homolysis%5BTitle%5D)+AND+%22The+Journal+of+Chemical+Physics%22%5BJournal%5D)">Dissociation dynamics of 3- and 4-nitrotoluene radical cations: Coherently driven C-NO bond homolysis.</a> The Journal of Chemical Physics. 148 (13), 134305(2018).</li>
<li>Markevitch, A. N., Romanov, D. A., Smith, S. M., Schlegel, H. B., Ivanov, M. Y., Levis, R. J. <a target="_blank" href="https://link.aps.org/doi/10.1103/PhysRevA.69.013401">Sequential non adiabatic excitation of large molecules and ions driven by strong laser fields.</a> Physical Review A. 69 (1), 013401(2004).</li>
<li>Lezius, M., Blanchet, M., Rayner, D. M., Villeneuve, D. M., Stolow, A., Ivanov, M. Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Nonadiabatic+multielectron+dynamics+in+strong+field+molecular+ionization%5BTitle%5D)+AND+%22Physical+Review+Letters%22%5BJournal%5D)">Nonadiabatic multielectron dynamics in strong field molecular ionization.</a> Physical Review Letters. 86 (1), 51(2001).</li>
<li>Lezius, M., Blanchet, V., Ivanov, M. Y., Stolow, A. <a target="_blank" href="https://aip.scitation.org/doi/abs/10.1063/1.1487823">Polyatomic molecules in strong laser fields: Nonadiabatic multielectron dynamics.</a> The Journal of Chemical Physics. 117 (4), 1575(2002).</li>
<li>Bohinski, T., Tibbetts, K. M., Tarazkar, M., Romanov, D., Matsika, S., Levis, R. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Measurement+of+an+electronic+resonance+in+a+ground-state%2C+gas-phase+acetophenone+cation+via+strong-field+mass+spectrometry%5BTitle%5D)+AND+%22The+Journal+of+Physical+Chemistry+Letters%22%5BJournal%5D)">Measurement of an electronic resonance in a ground-state, gas-phase acetophenone cation via strong-field mass spectrometry.</a> The Journal of Physical Chemistry Letters. 4 (10), 1587-1591 (2013).</li>
<li>Bohinski, T., Tibbetts, K. M., Tarazkar, M., Romanov, D., Matsika, S., Levis, R. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Measurement+of+ionic+resonances+in+alkyl+phenyl+ketone+cations+via+infrared+strong+field+mass+spectrometry%5BTitle%5D)+AND+%22The+Journal+of+Physical+Chemistry+A%22%5BJournal%5D)">Measurement of ionic resonances in alkyl phenyl ketone cations via infrared strong field mass spectrometry.</a> The Journal of Physical Chemistry A. 117 (47), 12374-12381 (2013).</li>
<li>Wiley, W. C., McLaren, I. H. <a target="_blank" href="https://aip.scitation.org/doi/abs/10.1063/1.1715212">Time-of-Flight Mass Spectrometer with Improved Resolution.</a> Review of Scientific Instruments. 26, 1150-1156 (1955).</li>
<li>Gutsev, G. L., Ampadu Boateng, D., Jena, P., Tibbetts, K. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((A+Theoretical+and+Mass+Spectrometry+Study+of+Dimethyl+Methylphosphonate%3A+New+Isomers+and+Cation+Decay+Channels+in+a+Femtosecond+Laser+Field%5BTitle%5D)+AND+%22The+Journal+of+Physical+Chemistry+A+%22%5BJournal%5D)">A Theoretical and Mass Spectrometry Study of Dimethyl Methylphosphonate: New Isomers and Cation Decay Channels in a Femtosecond Laser Field.</a> The Journal of Physical Chemistry A . 121 (44), 8414-8424 (2017).</li>
<li>Hankin, S. M., Villeneuve, D. M., Corkum, P. B., Rayner, D. M. <a target="_blank" href="https://link.aps.org/doi/10.1103/PhysRevA.64.013405">Intense-field laser ionization rates in atoms and molecules.</a> Physical Review A. 64 (1), 013405(2001).</li>
<li>Amitay, Z., Zajfman, D. <a target="_blank" href="https://aip.scitation.org/doi/abs/10.1063/1.1147950">A new type of multiparticle three-dimensional imaging detector with subnanosecond time resolution.</a> Review of Scientific Instruments. 68 (3), 1387-1392 (1997).</li>
<li>Trebino, R., Kane, D. J. <a target="_blank" href="https://www.osapublishing.org/abstract.cfm?uri=josaa-10-5-1101">Using phase retrieval to measure the intensity and phase of ultrashort pulses: frequency-resolved optical gating.</a> Journal of the Optical Society of America A. 10 (5), 1101(1993).</li>
<li>DeLong, K. W., Trebino, R., Hunter, J., White, W. E. <a target="_blank" href="https://www.osapublishing.org/abstract.cfm?uri=josab-11-11-2206">Frequency-resolved optical gating with the use of second harmonic generation.</a> Journal of the Optical Society of America B. 11 (11), 2206(1994).</li>
<li>Trebino, R. <a target="_blank" href="http://scholar.google.com/scholar?hl=en&safe=off&q=author%3aTrebino%2C+R+%22Frequency+Resolved+Optical+Gating%22">Frequency Resolved Optical Gating</a>. , Kluwer Academy Publishers. Boston. (2000).</li>
<li>Ruff, J. A., Siegman, A. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Single-pulse+laser+beam+quality+measurements+using+a+CCD+camera+system%5BTitle%5D)+AND+%22Optics+Letters%22%5BJournal%5D)">Single-pulse laser beam quality measurements using a CCD camera system.</a> Optics Letters. 31 (24), 4907-4909 (1992).</li>
<li>Trushin, S. A., Kosma, K., Fuß, W., Schmid, W. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Sub-10-fs+supercontinuum+radiation+generated+by+filamentation+of+few-cycle+800+nm+pulses+in+argon%5BTitle%5D)+AND+%22Optics+Letters%22%5BJournal%5D)">Sub-10-fs supercontinuum radiation generated by filamentation of few-cycle 800 nm pulses in argon.</a> Optics Letters. 32 (16), 2432-2434 (2007).</li>
<li>Fuß, W., Schmid, W. E., Pushpa, K. K., Trushin, S. A., Yatsuhashi, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Ultrafast+relaxation+and+coherent+oscillations+in+aminobenzonitriles+in+the+gas+phase+probed+by+intense-field+ionization%5BTitle%5D)+AND+%22Physical+Chemistry+Chemical+Physics+%22%5BJournal%5D)">Ultrafast relaxation and coherent oscillations in aminobenzonitriles in the gas phase probed by intense-field ionization.</a> Physical Chemistry Chemical Physics . 9 (10), 1151-1169 (2007).</li>
</ol>

The authors have nothing to disclose.

This protocol enables us to resolve ultrafast vibrational dynamics in polyatomic radical cations through selective preparation of the ions in the ground electronic state. While the standard strong-field ionization procedure using 800 nm can prepare vibrational coherences in ground-electronic state radical cations of first-row diatomics10,11,12,13 and CO214<sup...

Since the invention of the laser in 1960&#39;s, the goal of selectively breaking chemical bonds in molecules has been a longstanding dream of chemists and physicists. The ability to tune both laser frequency and intensity was believed to enable direct cleavage of a target bond through selective energy absorbance at the associated vibrational frequency1,2,3,4. However, early experiments found that intramolecular vibrational redistribution of the absorbed energy throughout the molecule often resulted in non-selective cleavage of the weakest bond4,5. It was not until the development of femtosecond pulsed lasers and the pump-probe technique6 in the late 1980&#39;s that direct manipulation of coherent vibrational states, or &#34;wave packets&#34;, enabled successful control over bond cleavage and other objectives6,7,8. Pump-probe measurements, wherein the &#34;pump&#34; pulse prepares an excited state or ion that is subsequently excited by a time-delayed &#34;probe&#34; pulse, remain one of the most widely used techniques for studying ultrafast processes in molecules9,10,11,12,13,14,15,16,17,18,19,20.
A significant limitation to studying the ultrafast dissociation dynamics of polyatomic radical cations using pump-probe excitation coupled to mass spectrometric detection arises from nonselective fragmentation of the target molecule by the ionizing pump pulse at the Ti:Sapphire wavelength of 800 nm21,22,23. This excess fragmentation results from nonadiabatic multiphoton ionization and can be mitigated by shifting the excitation wavelength into the near-infrared (e.g., 1200-1500 nm)22,23,24,25. At these longer wavelengths, the contribution of adiabatic electron tunneling increases relative to multiphoton excitation in the ionization process22,23. Adiabatic tunneling imparts little excess energy to the molecule and forms predominantly &#34;cold&#34; ground state molecular ions19,22,23. Our previous work has demonstrated that the use of near-infrared excitation significantly improves the preparation of coherent vibrational excitations, or &#34;wave packets&#34;, in polyatomic radical cations as compared to 800 nm excitation19,20. This work will illustrate the difference between strong-field ionization dominated by multiphoton and tunneling contributions with pump-probe measurements taken on the chemical warfare agent simulant dimethyl methylphosphonate (DMMP) using 1500 nm and 800 nm pump wavelengths.
In our pump-probe experiments, a pair of ultrashort laser pulses is time-delayed, recombined, and focused into a time-of-flight mass spectrometer, as shown in our setup in Figure 1. These experiments require a Ti:Sapphire regenerative amplifier producing &#62;2 mJ, 800 nm, 30 fs pulses. The amplifier output is split on a 90:10 (%R:%T) beam splitter, where most of the energy is used to pump an optical parametric amplifier (OPA) for generation of 1200 - 1600 nm, 100 - 300 &#181;J, 20 - 30 fs pulses. The diameter of the IR pump beam is expanded to 22 mm and the diameter of the 800 nm probe beam down-collimated to 5.5 mm and cored using an iris. These collimations result in the pump beam focusing to a significantly smaller beam waist (9 &#181;m) than the probe beam (30 &#181;m), thereby ensuring that all ions formed during the ionizing pump pulse are excited by the time-delayed probe pulse. This configuration is used because the goal of our experiments is to probe the dynamics of the parent molecular ion, which may be formed even at lower intensities near the edges of the focused beam. We note that if the dynamics of more highly-excited ionic species are of interest, then the probe beam diameter should be made smaller than that of the pump.
The pump and probe pulses propagate collinearly and are focused into the extraction region of a Wiley-McLaren time-of-flight mass spectrometer (TOF-MS)26 (Figure 2). Molecular samples placed in a vial are attached to the inlet and opened to the vacuum. This setup requires that the molecule under investigation have a nonzero vapor pressure; for molecules with low vapor pressure, the vial may be heated. The flow of gaseous sample into the chamber is controlled by two variable leak valves. The sample enters the chamber through a 1/16&#34; stainless steel tube approximately 1 cm away from the laser focus (Figure 2) in order to deliver a locally high concentration of target molecule in the extraction region27. The extraction plate has a 0.5 mm slit oriented orthogonal to the laser propagation and ion paths. Because the Rayleigh range of the pump beam is approximately 2 mm, this slit serves as a filter, allowing only ions generated from the central focal volume where the intensity is highest to pass through the extraction plate28. The ions enter a 1 m field-free drift tube to reach the Z-gap micro channel plate (MCP) detector29, where they are detected and recorded with a 1 GHz digital oscilloscope at the 1 kHz repetition rate of typical commercial Ti:Sapphire lasers.

<table><tbody><tr><td>&lt;strong&gt;Mass spectrometer components&lt;/strong&gt;</td><td></td><td></td><td></td></tr><tr><td>TOF lens stack and flight tube assembly</td><td>Jordan TOF Products, Inc.</td><td>C-677</td><td></td></tr><tr><td>18 mm Z-gap detector assembly</td><td>Jordan TOF Products, Inc.</td><td>C-701Z</td><td></td></tr><tr><td>TOF high voltage power supply</td><td>Jordan TOF Products, Inc.</td><td>D-603</td><td></td></tr><tr><td>&lt;strong&gt;Vacuum system components&lt;/strong&gt;</td><td></td><td></td><td></td></tr><tr><td>Rotary vane backing pump</td><td>Edwards Vacuum LLC</td><td>RV12</td><td></td></tr><tr><td>Turbomolecular pumps (2)</td><td>Edwards Vacuum LLC</td><td>EXT255H</td><td></td></tr><tr><td>Turbomolecular pump controllers (2)</td><td>Edwards Vacuum LLC</td><td>EXC300</td><td></td></tr><tr><td>Pressure gauge</td><td>Edwards Vacuum LLC</td><td>AIGX-S-DN40CF</td><td></td></tr><tr><td>Chiller for water cooling</td><td>Neslab</td><td>CFT-25</td><td></td></tr><tr><td>&lt;strong&gt;Femtosecond laser system&lt;/strong&gt;</td><td></td><td></td><td></td></tr><tr><td>Ti:Sapphire regenerative amplifier</td><td>Coherent, Inc.</td><td>Astrella</td><td>oscillator and amplifier in a single integrated system</td></tr><tr><td>Optical Parametric Amplifer (OPA)</td><td>Light Conversion</td><td>TOPAS Prime</td><td></td></tr><tr><td>&lt;strong&gt;Motion control&lt;/strong&gt;</td><td></td><td></td><td></td></tr><tr><td>Motorized linear translation stage 1&quot; travel</td><td>Thorlabs</td><td>Z825B</td><td></td></tr><tr><td>controller for linear translation stage</td><td>Thorlabs</td><td>KDC 101</td><td></td></tr><tr><td>USB controller hub and power supply</td><td>Thorlabs</td><td>KCH 601</td><td></td></tr><tr><td>Manual linear translation stage 1&quot; travel</td><td>Thorlabs</td><td>PT1</td><td></td></tr><tr><td>&lt;strong&gt;Detectors&lt;/strong&gt;</td><td></td><td></td><td></td></tr><tr><td>Pyroelectric laser energy meter</td><td>Coherent, Inc.</td><td>1168337</td><td></td></tr><tr><td>Thermal laser power meter</td><td>Coherent, Inc.</td><td>5356E16R</td><td></td></tr><tr><td>Si-biased detector 200-1100 nm</td><td>Thorlabs</td><td>DET10A</td><td></td></tr><tr><td>Compact USB CMOS Camera</td><td>Thorlabs</td><td>DCC1545M</td><td></td></tr><tr><td>USB spectrometer</td><td>Ocean Optics</td><td>HR4000</td><td></td></tr><tr><td>1 GHz digital oscilloscope&amp;nbsp;</td><td>LeCroy</td><td>WaveRunner 610Zi</td><td></td></tr><tr><td>&lt;strong&gt;Optics&lt;/strong&gt;</td><td></td><td></td><td></td></tr><tr><td>Type 1 BBO crystal</td><td>Crylight Photonics</td><td>BBO007</td><td>aperture and thickness may be customized</td></tr><tr><td>Achromatic half wave plate, 1100-2000 nm</td><td>Thorlabs</td><td>AHWP05M-1600</td><td></td></tr><tr><td>Wollaston prism polarizer</td><td>Thorlabs</td><td>WPM10</td><td></td></tr><tr><td>Hollow retro-reflector</td><td>PLX, Inc.</td><td>OW-20-1C</td><td></td></tr><tr><td>Variable neutral density filter</td><td>Thorlabs</td><td>NDC-100C-2</td><td></td></tr><tr><td>Longpass dichroic mirror 2&quot; diameter</td><td>Thorlabs</td><td>DMLP950L</td><td></td></tr><tr><td>&lt;strong&gt;Software&lt;/strong&gt;</td><td></td><td></td><td></td></tr><tr><td>Digital Camera image software</td><td>Thorlabs</td><td>ThorCam</td><td></td></tr><tr><td>Instrument communication interface</td><td>National Instruments</td><td>NI-MAX</td><td></td></tr><tr><td>Graphical development environment for measurement programs</td><td>National Instruments</td><td>LabVIEW</td><td></td></tr><tr><td>Data processing software</td><td>Mathworks</td><td>MATLAB</td><td></td></tr></tbody></table>

measurement of ultrafast vibrational coherences in polyatomic radical cations with strong-field adiabatic ionization

Measurement of Ultrafast Vibrational Coherences in Polyatomic Radical Cations with Strong-Field Adiabatic Ionization

We present a pump-probe method for preparing vibrational coherences in polyatomic radical cations and probing their ultrafast dynamics. By shifting the wavelength of the strong-field ionizing pump pulse from the commonly used 800 nm into the near-infrared (1200-1600 nm), the contribution of adiabatic electron tunneling to the ionization process increases relative to multiphoton absorption. Adiabatic ionization results in predominant population of the ground electronic state of the ion upon electron removal, which effectively prepares a coherent vibrational state (&#34;wave packet&#34;) amenable to subsequent excitation. In our experiments, the coherent vibrational dynamics are probed with a weak-field 800 nm pulse and the time-dependent yields of dissociation products measured in a time-of-flight mass spectrometer. We present the measurements on the molecule dimethyl methylphosphonate (DMMP) to illustrate how using 1500 nm pulses for excitation enhances the amplitude of coherent oscillations in ion yields by a factor of 10 as compared to 800 nm pulses. This protocol may be implemented in existing pump-probe setups through the incorporation of an optical parametric amplifier (OPA) for wavelength conversion.

Results obtained for the molecule DMMP21 are presented. Figure 3 shows the DMMP mass spectra taken at zero time-delay with the peak intensities of the 1500 nm pump and 800 nm probe pulses being 8 x 1013 and 8 x 1012 W cm-2, respectively. For reference, the mass spectrum taken with only the pump pulse is also shown. The spectra are averaged over 10,000 laser shots (total acquisition time 12 s). The incre...

We present a protocol for probing ultrafast vibrational coherences in polyatomic radical cations that result in molecular dissociation.

We present a pump-probe method for preparing vibrational coherences in polyatomic radical cations and probing their ultrafast dynamics. By shifting the ...

measurement-ultrafast-vibrational-coherences-polyatomic-radical

Research

JoVE Journal

Chemistry

A molecular beam coupled to tunable vacuum ultraviolet photoionization mass spectrometer at a synchrotron provides a convenient tool to explore the electronic structure of isolated gas phase molecules and clusters. Proton transfer mechanisms in DNA base dimers were elucidated with this technique.

Molecular Beam Mass Spectrometry With Tunable Vacuum Ultraviolet (VUV) Synchrotron Radiation

Time-resolved atomic and diatomic molecular species are measured using LIBS. The spectra are collected at various time delays following the generation of optical breakdown plasma with Nd:YAG laser radiation and are analyzed to infer electron density and temperature.

Measurement and Analysis of Atomic Hydrogen and Diatomic Molecular AlO, C2, CN, and TiO Spectra Following Laser-induced Optical Breakdown

We present a protocol for creating a real-time movie of a molecular rotational wave packet using a high-resolution Coulomb explosion imaging setup.

Direct Imaging of Laser-driven Ultrafast Molecular Rotation

For small chiral species, Coulomb Explosion Imaging provides a new approach to determine the handedness of individual molecules.

Coulomb Explosion Imaging as a Tool to Distinguish Between Stereoisomers

We describe an experiment designed to probe the electronic damage induced in nanocrystals of Buckminsterfullerene (C60) by intense, femtosecond pulses of X-rays. The experiment found that, surprisingly, rather than being stochastic, the X-ray induced electron dynamics in C60 are highly correlated, extending over hundreds of unit cells within the crystals1.

Measurements of Long-range Electronic Correlations During Femtosecond Diffraction Experiments Performed on Nanocrystals of Buckminsterfullerene

This protocol describes the key steps for performing and analyzing pump-probe experiments combining a femtosecond optical laser with a free-electron laser in order to study ultrafast photochemical reactions in gas-phase molecules.

An Experimental Protocol for Femtosecond NIR/UV - XUV Pump-Probe Experiments with Free-Electron Lasers

Here, we present a protocol for photoelectron imaging of anionic species. Anions generated in vacuo and separated by mass spectrometry are probed using velocity mapped photoelectron imaging, providing details of anion and neutral energy levels, anion and neutral structure and the nature of the anion electronic state.

Photoelectron Imaging of Anions Illustrated by 310 Nm Detachment of F&#8722;

Details of signal generation and optimization, measurement, data acquisition, and data handling for a femtosecond time-resolved near-IR stimulated Raman spectrometer are described. A near infrared stimulated Raman study on the excited-state dynamics of β-carotene in toluene is shown as a representative application.

Ultrafast Time-resolved Near-IR Stimulated Raman Measurements of Functional &#960;-conjugate Systems

A dye-sensitized solar cell was solvated by RTILs; using optimized empirical potentials, a molecular dynamics simulation was applied to compute vibrational properties. The obtained vibrational spectra were compared with experiment and ab initio molecular dynamics; various empirical potential spectra show how partial-charge charge parameterization of the ionic liquid affects vibrational spectra prediction.

Vibrational Spectra of a N719-Chromophore/Titania Interface from Empirical-Potential Molecular-Dynamics Simulation, Solvated by a Room Temperature Ionic Liquid

This protocol is a beginner's entryway into processing, fitting, and interpreting transient absorption spectra. The focus of this protocol is the preparation of datasets, and fitting using both single wavelength kinetics and global lifetime analysis. Challenges associated with transient absorption data and its fitting are discussed.

An Introduction to Processing, Fitting, and Interpreting Transient Absorption Data

Learn ultrafast vibrational coherence measurement in polyatomic radical cations using strong-field adiabatic ionization. This method resolves coherent motions by preparing cations in the ground electronic state.

Measurement of Ultrafast Vibrational Coherences in Polyatomic Radical Cations with Strong-Field Adiabatic Ionization

Explore More Videos