Name: A Friction Testing-Bioreactor Device for Study of Synovial Joint Biomechanics, Mechanobiology, and Physical Regulation (Video) | JoVE Journal
Uploaded: 2022-06-02T13:50:00.000+00:00
Duration: 9 min 48 s
Description: Learn friction testing of living biological tissues using a modular bioreactor device with reciprocal sliding and compressive load. This method evaluates mechanical and mechanobiological responses of cartilage and synovium for joint health research.

ai_agent_IP

ai_agent

maintenance

instantTrialDurationMinutes

isBiopharma

enableNewMyJoveSectionDesign

educationFeatures

seoMetaApi

ai_copilot_institution_blacklist

ai_chat_institution_blacklist

freeAccessWindow

ssoRoleCapture

scheduledMaintenanceBanner

joveLabsFeatures

disable_autoplay_for_bots

extended_trial_duration

5 minutes

This work was supported by the Orthopaedic Scientific Research Foundation, NIH 5R01 AR068133, NIH TERC 5P41EB027062, and NIGMS R01 692 GM083925 (Funder ID: 10.13039/100000057).

The authors have nothing to disclose.

A dynamic mechanical environment exists within the joint as cartilage is subjected to compressive, tensile, and shear forces, and hydrostatic and osmotic pressures44,45. Although cartilage is the main load-bearing tissue of the joint, the synovium also undergoes frictional interactions with the cartilage surface and with itself in regions where the tissue folds. The physical interactions between cartilage and synovium are likely responsible for transferring cells...

Osteoarthritis (OA) is a debilitating, degenerative joint disease that affects more than 32 million American adults, with a healthcare and socio-economic cost of over $16.5 billion1. The disease has classically been characterized by the degradation of articular cartilage and subchondral bone; however, changes to the synovium have recently garnered appreciation as synovitis has been linked to OA symptoms and progression2,3,4. In primary (idiopathic) OA, normal &#39;wear and tear&#39; associated with aging inhibits cartilage&#39;s ability to sustain its load-bearing and lubrication functions. The stresses generated by prolonged sliding contact of articular cartilage layers or sliding contact of cartilage against implant materials have been shown to facilitate delamination wear through subsurface fatigue failure5,6. As a dynamic mechanical environment exists within the joint7,8, the frictional interactions of articular cartilage and synovium may influence joint homeostasis through tissue level wear and cellular mechanotransduction. To study these mechanical and mechanobiological processes, a device has been designed to replicate the motion of the joint with tight control over compressive and frictional loading5,6,9,10,11,12,13.
The present protocol describes a friction testing device that delivers reciprocal, translating motion and compressive load to contacting surfaces of living tissue explants. The computer-controlled device permits user control of the duration of each test, applied load, range of motion of the translation stage, and translation speed. The device is modular, allowing for testing of various counterfaces, such as tissue-on-tissue (cartilage-on-cartilage and synovium-on-cartilage) and tissue-on-glass. In addition to the functional measurements obtained by the tester, tissue and lubricating bath components can be assessed before and after testing to evaluate the biological changes imparted by a given experimental regimen.
Studies of cartilage tribology have been performed for decades, and several techniques have been developed to measure friction coefficients between cartilage and glass and cartilage on cartilage14,15. The different approaches are motivated by the joint and/or the lubrication mechanism of interest. There is often a tradeoff between the control of experimental variables and the recapitulation of physiologic parameters. Pendulum-style devices utilize intact joints as the fulcrum of a simple pendulum where one joint surface translates freely over the second surface14,16,17,18. Instead of using intact joints, friction measurements may be obtained by sliding cartilage explants over desired surfaces14,19,20,21,22,23,24,25. Reported friction coefficients of articular cartilage have varied over a wide range (from 0.002 to 0.5) depending on the operating conditions14,26. Devices have been created to replicate rotary motion23,27,28. Gleghorn et al.26 developed a multi-well custom tribometer to observe cartilage lubrication profiles using Stribeck curve analysis, and a linear oscillatory sliding motion was applied between cartilage against a flat glass counterface.
This device aims to isolate frictional responses and explore the mechanobiology of living tissues under various loading conditions. The device employs a simplified test set-up simulating joint articulation through compressive sliding, which can approximate both rolling and sliding motion with the understanding that the resistance in pure rolling motion is negligible relative to the measured friction coefficient of articular cartilage29. Originally built to study the effects of interstitial fluid pressurization on the frictional response of articular cartilage9, the tester has since been used to explore topics such as frictional effects of removing the superficial zone of cartilage10, lubricating effects of synovial fluid11, cartilage wear hypotheses5,6,30, and synovium-on-tissue friction measurements13. The friction-testing bioreactor can conduct friction experiments under sterile conditions, providing a novel mechanism to explore how frictional forces affect the mechanobiological responses of living cartilage and synovium. This design can be used as a biomimetic bioreactor to study the physical regulation of living joint tissues in response to applied physiologic loading associated with diarthrodial joint articulation.
This study presents a configuration for synovium-on-cartilage friction testing over a range of contact stresses and in different lubricating baths. The articulating surface area of most joints is, to a great extent, synovial tissue31. While synovium-on-cartilage sliding does not occur at primary load-bearing surfaces, the frictional interactions between the two tissues may still have important implications for tissue level repair and cell mechanotransduction. It has previously been shown that fibroblast-like synoviocytes (FLS) residing on the intimal layer of the synovium are mechanosensitive, responding to fluid-induced shear stress32. It has also been demonstrated that stretch33,34 and fluid-induced shear stress35 modulate FLS lubricant production. As such, direct sliding contact between synovium and cartilage may provide another mechanical stimulus to resident cells in the synovium.
Only a few reports on synovium friction coefficients have been published31,36. Estell et al.13 sought to expand on the previous characterization by utilizing biologically relevant counterfaces. With the friction testing device&#39;s ability to test living tissues, it is possible to mimic physiologic tissue interactions during joint articulation to elucidate the role of contact shear stress on synoviocyte function and its contribution to the crosstalk between synovium and cartilage. The latter has been implicated in mediating synovial joint inflammation in arthritis and post-injury. Due to the physical proximity of cartilage to synovium and synovial fluid, which contain synoviocytes that exhibit multipotent capacity, including chondrogenesis, it is postulated that synoviocytes play a role in cartilage homeostasis and repair by engrafting to the articular surface. In this context, physical contact and reciprocal shearing of cartilage-synovium and synovium-synovium may increase the accessibility of synoviocytes to regions of cartilage damage37,38,39,40. Studies utilizing synovium-on-cartilage configurations will not only provide insights into joint gross tissue mechanics and tribology, but they may also lead to new strategies for maintaining joint health.

<table><tbody><tr><td>Aluminum foil</td><td>Reynolds Group Holdings</td><td>Reynolds Wrap</td><td>Sterile tissue harvest</td></tr><tr><td>Aluminum-framed acrylic enclosure</td><td>Custom made</td><td></td><td>Friction tester component</td></tr><tr><td>Autoclavable instant sealing sterilization pouches</td><td>Fisherbrand</td><td>01-812-54</td><td>Sterilization of tools</td></tr><tr><td>Autoclave</td><td>Buxton</td><td></td><td>Sterilization of tools</td></tr><tr><td>Beaker (250 mL)</td><td>Pyrex Vista</td><td>70000</td><td>Tissue harvest</td></tr><tr><td>Betadine (Povidone Iodine Prep Solution)</td><td>Medline Industries, LP</td><td>MDS093906</td><td>Sterile tissue harvest</td></tr><tr><td>Biological safety cabinet</td><td>Labconco</td><td>Purifier Logic+ Class II, Type A2 BSC</td><td>Sterile tissue harvest</td></tr><tr><td>Biospy punch</td><td>Steritool Inc.</td><td>50162</td><td>Tissue harvest</td></tr><tr><td>Box cutter</td><td>American Safety Razor Company</td><td>94-120-71</td><td>Tissue harvest</td></tr><tr><td>Circular acrylic-sillicone post (synovium)</td><td>Custom made</td><td></td><td>Tissue mounting</td></tr><tr><td>Culture media</td><td>Custom made</td><td></td><td>DMEM (Cat No. 11-965-118; Gibco) supplemented with 50 &amp;mu;g/mL L-proline (Cat. No. P5607; Sigma), 100 &amp;mu;g/mL sodium pyruvate (Cat. No. S8636; Sigma), 1% ITS (Cat. No. 354350; Corning), and 1% antibiotic&amp;ndash;antimycotic (Cat. No. 15-240-062, Gibco)</td></tr><tr><td>Cyanoacrylate (Loctite 420 Clear)</td><td>Henkel</td><td>135455</td><td>Tissue mounting</td></tr><tr><td>Dead weights</td><td>OHAUS</td><td></td><td>Normal load</td></tr><tr><td>Ethanol 200 proof</td><td>Decon Labs, Inc.</td><td>2701</td><td>Dilute to 70 %</td></tr><tr><td>Fixed base</td><td>ThorLabs, Inc.</td><td>SB1T</td><td>Friction tester component</td></tr><tr><td>Forceps (synovium harvest)</td><td>Fine Science Tools</td><td>11019-12</td><td>Tissue harvest</td></tr><tr><td>Forceps (synovium mounting)</td><td>Excelta</td><td>3C-S-PI</td><td>Tissue mounting</td></tr><tr><td>Horizontal linear encoder (for translating stage)</td><td>RSF Electronics, Inc.</td><td>MSA 670.63</td><td>Friction tester component; system resolution of 1 &amp;micro;m</td></tr><tr><td>Hot glue gun and glue</td><td>FPC Corporation</td><td>Surebonder Pro 4000A</td><td>Tissue mounting</td></tr><tr><td>LabVIEW</td><td>National Instruments Corporation</td><td>LabVIEW&amp;nbsp; 2010</td><td>Friction testing program</td></tr><tr><td>Load cell</td><td>JR3 Inc.</td><td>20E12A-M25B</td><td>Friction tester component; 0.0019 lbs resolution in x&amp;amp;y, 0.0038 lbs resolution in z</td></tr><tr><td>Loading platen</td><td>Custom made</td><td></td><td>Tissue mounting</td></tr><tr><td>O-ring</td><td>Parker</td><td>S1138AS568-009</td><td>Tissue mounting</td></tr><tr><td>Petri dish (60 mm)</td><td>Falcon</td><td>351007</td><td>Tissue mounting</td></tr><tr><td>PivotLok Work Positioner (tibia holder)</td><td>Industry Depot, Pivot Lok</td><td>PL325</td><td>Tissue harvest</td></tr><tr><td>Removable base</td><td>ThorLabs, Inc.</td><td>SB1B</td><td>Friction tester component</td></tr><tr><td>Ring stand</td><td></td><td></td><td>Tissue harvest</td></tr><tr><td>Scalpel blades</td><td>Havel&#039;s Inc.</td><td>FSC22</td><td>Tissue harvest</td></tr><tr><td>Scalpel handle</td><td>FEATHER Safety Razor Co., Ltd.</td><td>No. 4</td><td>Tissue harvest</td></tr><tr><td>Screwdriver</td><td>Wera</td><td>3334</td><td>Tissue harvest</td></tr><tr><td>Stage</td><td>JMAR</td><td></td><td>Friction tester component</td></tr><tr><td>Stepper motor</td><td>Oriental Motor Co., Ltd.</td><td>PK266-03B</td><td>Friction tester component</td></tr><tr><td>Suction tool</td><td>Virtual Industries, Inc.</td><td>PEN-VAC Vacuum Pen</td><td>Tissue mounting</td></tr><tr><td>Support rod</td><td>Custom made</td><td></td><td>Tissue mounting</td></tr><tr><td>Surgical scissors</td><td>Fine Science Tools</td><td>14061-09</td><td>Tissue mounting</td></tr><tr><td>Synovial fluid (bovine)</td><td>Animal Technologies, Inc.</td><td></td><td>Friction testing bath</td></tr><tr><td>Testing bath</td><td>Custom made</td><td></td><td>Phosphate-Buffered Saline (PBS) with protease inhibitors: 0.04% isothiazolone-base biocide (Proclin 950 Cat. No. 46878-U; Sigma) and 0.1% protease inhibitor - 0.05 M ethylenediaminetetraacetic acid, EDTA (Cat. No. 0369; Sigma)</td></tr><tr><td>Tissue culture incubator</td><td>Fisher Scientific</td><td>Isotemp</td><td>Sterile culture</td></tr><tr><td>Vertical linear encoder (for loading stage)</td><td>Renishaw</td><td>T1031-30A</td><td>Friction tester component; 20 nm resolution</td></tr><tr><td>Voice coil actuator</td><td>H2W Technologies</td><td>NCC20-15-027-1RC</td><td>Friction tester component</td></tr></tbody></table>

a friction testing-bioreactor device for study of synovial joint biomechanics, mechanobiology, and physical regulation

A Friction Testing-Bioreactor Device for Study of Synovial Joint Biomechanics, Mechanobiology, and Physical Regulation

In primary osteoarthritis (OA), normal 'wear and tear' associated with aging inhibits the ability of cartilage to sustain its load-bearing and lubrication functions, fostering a deleterious physical environment. The frictional interactions of articular cartilage and synovium may influence joint homeostasis through tissue level wear and cellular mechanotransduction. To study these mechanical and mechanobiological processes, a device capable of replicating the motion of the joint is described. The friction testing device controls the delivery of reciprocal translating motion and normal load to two contacting biological counterfaces. This study adopts a synovium-on-cartilage configuration, and friction coefficient measurements are presented for tests performed in a phosphate-buffered saline (PBS) or synovial fluid (SF) bath. The testing was performed for a range of contact stresses, highlighting the lubricating properties of SF under high loads. This friction testing device can be used as a biomimetic bioreactor for studying the physical regulation of living joint tissues in response to applied physiologic loading associated with diarthrodial joint articulation.

A synovium-on-cartilage configuration was used to friction test juvenile bovine explants. The synovium was mounted on a 10 mm diameter acrylic loading platen such that the intimal layer would be in contact with the underlying cartilage. A tibial strip was used as the cartilage counterface (Figure 6A). Tibial strips were cut with a depth of approximately 1.4 mm and a size of 10 mm x 30 mm. The samples were tested for 1 h at 37 °C in a phosphate-buffered saline (PBS) bath or a bovine synovial ...

The present protocol describes a friction testing device that applies simultaneous reciprocal sliding and normal load to two contacting biological counterfaces.

In primary osteoarthritis (OA), normal 'wear and tear' associated with aging inhibits the ability of cartilage to sustain its load-bearing and lubrication ...

a-friction-testing-bioreactor-device-for-study-synovial-joint

Research

JoVE Journal

Bioengineering

A cyclic pressure bioreactor capable of subjecting heart valve tissue to physiological and pathological pressure conditions has been designed. A LabVIEW program allows users to control pressure magnitude, amplitude and frequency. This device can be used to study the mechanobiology of heart valve tissue or isolated cells.

Design of a Cyclic Pressure Bioreactor for the Ex Vivo Study of Aortic Heart Valves

We designed a novel mechanical loading bioreactor that can apply uniaxial or biaxial mechanical strain to a cartilage biocomposite prior to transplantation into an articular cartilage defect.

Design of a Biaxial Mechanical Loading Bioreactor for Tissue Engineering

We present in this article a novel stretching platform that can be used to investigate single cell responses to complex anisotropic biaxial mechanical deformation and quantify the mechanical properties of biological tissues.

A Novel Stretching Platform for Applications in Cell and Tissue Mechanobiology

Substrates with stiffness in the kilopascal-range are useful to study the response of cells to physiologically relevant micro-environment stiffness. Using just a widefield fluorescence microscope, the Young's modulus of soft silicone gels can be determined using an indentation with a suitable sphere.

Stiffness Measurement of Soft Silicone Substrates for Mechanobiology Studies Using a Widefield Fluorescence Microscope

Here we present a protocol to develop a pure uniaxial loading machine. Critical design aspects are employed to ensure accurate and reproducible testing results.

Application of Design Aspects in Uniaxial Loading Machine Development

The protocol describes efficient and reproducible tensile biomechanical testing methods for murine tendons through the use of custom-fit 3D printed fixtures.

Biomechanical Testing of Murine Tendons

Probing during arthroscopy surgery is normally done to assess the condition of the soft tissue, but this approach has always been subjective and qualitative. This report describes a probing device that can measure the resistance of the soft tissue quantitatively with a tri-axial force sensor during arthroscopy.

A Probing Device for Quantitatively Measuring the Mechanical Properties of Soft Tissues during Arthroscopy

This protocol describes the preparation, biotribological testing, and analysis of osteochondral cylinders sliding against metal implant material. Outcome measures included in this protocol are metabolic activity, gene expression and histology.

Biotribological Testing and Analysis of Articular Cartilage Sliding against Metal for Implants

The goal of this protocol is to execute a dynamic co-culture of human macrophages and myofibroblasts in tubular electrospun scaffolds to investigate material-driven tissue regeneration, using a bioreactor which enables the decoupling of shear stress and cyclic stretch.

A Multi-Cue Bioreactor to Evaluate the Inflammatory and Regenerative Capacity of Biomaterials under Flow and Stretch

We provide detailed methods for generating four types of tissues from human mesenchymal stem cells, which are used to recapitulate the cartilage, bone, fat pad, and synovium in the human knee joint. These four tissues are integrated into a customized bioreactor and connected through microfluidics, thus generating a knee joint-on-a-chip.

Creation of a Knee Joint-on-a-Chip for Modeling Joint Diseases and Testing Drugs

We developed a human ex vivo transwell system capable of evaluating acute inflammatory, infectious, and structural changes in synovium.

A Pre-Clinical Model of Synovitis Using Ex vivo Human Synovial Tissue with Preserved Function and Architecture

Learn friction testing of living biological tissues using a modular bioreactor device with reciprocal sliding and compressive load. This method evaluates mechanical and mechanobiological responses of cartilage and synovium for joint health research.

A Friction Testing-Bioreactor Device for Study of Synovial Joint Biomechanics, Mechanobiology, and Physical Regulation

Explore More Videos