Name: High-precision Electromagnetic Flowmeter with Empty Pipe Detection via Complex Programmable Logic Device-based Waveform Recognition (Video) | JoVE Journal
Uploaded: 2025-06-27T13:05:00.000+00:00
Duration: 5 min 11 s
Description: Discover how waveform recognition enhances electromagnetic flowmeter precision using CPLD-based signal processing. This method achieves 0.1% accuracy across 0.1-15 m/s flow rates with reliable empty pipe detection.

ai_agent_IP

ai_agent

maintenance

instantTrialDurationMinutes

isBiopharma

enableNewMyJoveSectionDesign

educationFeatures

seoMetaApi

ai_copilot_institution_blacklist

ai_chat_institution_blacklist

freeAccessWindow

ssoRoleCapture

scheduledMaintenanceBanner

joveLabsFeatures

disable_autoplay_for_bots

extended_trial_duration

5 minutes

1. Processing of electrode-induced voltage
<ol>
	<li>Take the induced electromotive force from both sides of the sensor as the input signal (Figure 1A). 
	​NOTE: The original voltage signal is extremely weak and severely contaminated by noise, exhibiting a low signal-to-noise ratio (SNR).</li>
	<li>Apply a 10x differential amplifier to amplify the signal (Figure 1B).</li>
	<li>Proceed to feed the signal into an active second-order bandpass filter comprising cascaded high-pass and low-pass filter stages. Initially, remove low-frequency components through the high-pass filter, then channel the filtered output via a coupling capacitor to the subsequent low-pass filter stage. At this phase, suppress residual high-frequency noise, with the resultant output waveform illustrated in Figure 1C.</li>
	<li>Amplify the denoised signal using an inverting amplifier, as illustrated in Figure 1D.</li>
	<li>Implement a gain of -1 through an inverting amplifier to convert the negative-polarity signal into positive polarity while preserving its amplitude unchanged.</li>
	<li>Direct the positive and negative half-cycle signals (Figure 1E) to the two channels of the analog switch, respectively, and simultaneously input both signals into the comparator.
	<ol>
		<li>Process the two output signals generated by the comparator using a CPLD to detect pipeline vacancy status and determine fluid flow direction.</li>
		<li>Utilize CPLD to control the channels of the analog switch, employing zero-crossing detection to precisely regulate switching timing and thereby introduce only minimal delay (Figure 1F).</li>
	</ol>
	</li>
	<li>After gating via an analog switch, feed the signal into the third-stage signal amplifier.</li>
	<li>Apply an integrating low-pass filter to process the signal, then transmit the processed signal (Figure 1G) to the microcontroller unit (MCU) for subsequent computational operations.</li>
</ol>
2. Implemented schematic and working principle
<ol>
	<li>Position the signal amplifier as illustrated in Figure 2 to amplify the signal by a factor of 10.</li>
	<li>Connect the signal amplifier to the band-pass filter.</li>
	<li>Connect the secondary amplifier to the output of the band-pass filter. Directly buffer the positive half-cycle signal for output while routing the negative half-cycle signal through an inverter prior to its input into the analog switch.</li>
	<li>Configure two comparators beneath the analog switch. Transmit the comparator output signals to the CPLD, and utilize the CPLD to control the analog switch's on/off states based on sequential logic.</li>
	<li>After undergoing secondary filtering, input the rectified signal from the analog switch output into the variable-gain amplifier.</li>
	<li>Route the processed signal through the low-pass filter into the analog-to-digital (AD) conversion channel of the processor.</li>
</ol>
3. Forward and reverse flow determination
<ol>
	<li>As illustrated in Figure 3A, observe that the forward flow mode is characterized by the falling edge of the excitation signal corresponding to the low-level forward conduction signal.</li>
	<li>Observe that the reverse flow pattern illustrated in Figure 3B manifests as a temporal correspondence between the falling edge of the excitation signal and the activation of the high-level forward conduction signal.</li>
	<li>Employ a CPLD to differentiate two characteristic signal patterns, thereby achieving precise discrimination between forward and reverse water flow.</li>
</ol>
4. Linearity correction
<ol>
	<li>Apply the piecewise linear correction method to rectify the input signal using the following mathematical expression of the correction function: 
	<img alt="Mathematical equation, summation formulas showing piecewise function for variable y; description only." src="/files/ftp_upload/68390/68390eq001v2.jpg" data-altupdatedat="1788304762000" data-alt="Equation 1"> 
	Where y is the corrected flow rate, f is the flow rate generated by the standard instrument, n is the number of segments, ki is the correction coefficient for the i-th interval, and xi is the upper boundary value of the i-th interval.</li>
	<li>Derive the correction coefficient formula based on the least squares method using the linear regression slope formula, using the following mathematical expression: 
	<img alt="Linear regression equation, k calculation, formula for slope, statistical analysis method." src="/files/ftp_upload/68390/68390eq004.jpg" data-altupdatedat="1788304762000" data-alt="Equation 4"> 
	Where k is the correction coefficient, n is the number of data points, xi is the flow rate measured by the experimental instrument, yi and is the flow rate generated by the standard instrument.</li>
</ol>

<ol><li>Comparing performance of ultrasonic type and magnetic type flowmeters for desalination applications. Elgali, A. 2024 IEEE 4th International Maghreb Meeting of the Conference on Sciences and Techniques of Automatic Control and Computer Engineering (MI-STA), , 156-163 (2024).</li>
<li>Kollár, L. E., Lucas, G. P., Zhang, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Proposed+method+for+reconstructing+velocity+profiles+using+a+multi-electrode+electromagnetic+flow+meter%5BTitle%5D)+AND+%22Meas+Sci+Technol%22%5BJournal%5D)">Proposed method for reconstructing velocity profiles using a multi-electrode electromagnetic flow meter.</a> Meas Sci Technol. 25, 075301(2014).</li>
<li>Mohindru, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Recent+advancements+in+volumetric+flow+meter+for+industrial+application%5BTitle%5D)+AND+%22Heat+Mass+Transfer%22%5BJournal%5D)">Recent advancements in volumetric flow meter for industrial application.</a> Heat Mass Transfer. 59 (11), 2149-2166 (2023).</li>
<li>Technical features and application of electromagnetic flow meter. Chen, B., et al. 2020 International Conference on Communications, Information System and Computer Engineering (CISCE), , 1-5 (2020).</li>
<li>Watral, Z., Jakubowski, J., Michalski, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Electromagnetic+flow+meters+for+open+channels%3A+Current+state+and+development+prospects%5BTitle%5D)+AND+%22Flow+Measurement+and+Instrumentation%22%5BJournal%5D)">Electromagnetic flow meters for open channels: Current state and development prospects.</a> Flow Measurement and Instrumentation. 42, 16-25 (2015).</li>
<li>Ge, L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Study+on+a+new+electromagnetic+flow+measurement+technology+based+on+differential+correlation+detection%5BTitle%5D)+AND+%22Sensors+%28Basel%29%22%5BJournal%5D)">Study on a new electromagnetic flow measurement technology based on differential correlation detection.</a> Sensors (Basel). 20 (9), 2489(2020).</li>
<li>Ge, L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Electromagnetic+flow+detection+technology+based+on+correlation+theory%5BTitle%5D)+AND+%22IEEE+Access%22%5BJournal%5D)">Electromagnetic flow detection technology based on correlation theory.</a> IEEE Access. 8, 56203-56213 (2020).</li>
<li>Beck, K. J. <a target="_blank" href="http://scholar.google.com/scholar?hl=en&safe=off&q=%22An+analysis+of+electromagnetic+flowmeters%3A+A+numerical+study+%5BAll+Graduate+Theses+and+s%5D%22">An analysis of electromagnetic flowmeters: A numerical study [All Graduate Theses and Dissertations]</a>. , https://digitalcommons.usu.edu/etd/8203 8203(2021).</li>
<li>Ge, L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Study+on+high-precision+electromagnetic+flow+measurement+technology+based+on+novel+regular+octagonal+excitation+coil%5BTitle%5D)+AND+%22Gongcheng+Kexue+Yu+Jishu%2FAdvanced+Engineering+Sciences%22%5BJournal%5D)">Study on high-precision electromagnetic flow measurement technology based on novel regular octagonal excitation coil.</a> Gongcheng Kexue Yu Jishu/Advanced Engineering Sciences. 54 (9), 178-190 (2022).</li>
<li>Li, Z., Huang, Q., Duan, Y., Chen, W., Zou, L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Research+on+electromagnetic+flowmeter+based+on+double-frequency+trapezoidal+wave+excitation%5BTitle%5D)+AND+%22J+Phys%3A+Conf+Ser%22%5BJournal%5D)">Research on electromagnetic flowmeter based on double-frequency trapezoidal wave excitation.</a> J Phys: Conf Ser. 1549, 052086(2020).</li>
<li>Cheng, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Portable+intelligent+electromagnetic+flowmeter+controlled+by+magnetic+induction+intensity%5BTitle%5D)+AND+%22Electronics%22%5BJournal%5D)">Portable intelligent electromagnetic flowmeter controlled by magnetic induction intensity.</a> Electronics. 13 (3), 556(2024).</li>
<li>Cao, J. L., Li, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Study+on+methods+of+empty+pipe+detection+for+electromagnetic+flowmeter%5BTitle%5D)+AND+%22Chin+J+Sci+Instrum%22%5BJournal%5D)">Study on methods of empty pipe detection for electromagnetic flowmeter.</a> Chin J Sci Instrum. 27 (6), 643(2006).</li>
<li>Michalski, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((A+new+approach+to+estimating+the+main+error+of+a+primary+transducer+for+an+electromagnetic+flowmeter%5BTitle%5D)+AND+%22IEEE+Trans+Instrum+Meas%22%5BJournal%5D)">A new approach to estimating the main error of a primary transducer for an electromagnetic flowmeter.</a> IEEE Trans Instrum Meas. 50 (3), 764-767 (2001).</li>
<li>Lathi, B. P., Green, R. <a target="_blank" href="http://scholar.google.com/scholar?hl=en&safe=off&q=author%3aLathi%2C+BP+%22Signal+processing+and+linear+systems%22">Signal processing and linear systems</a>. 2, Oxford University Press. Oxford. (1998).</li>
<li>Tetirick, J. E., Mengoli, L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Calibration+and+use+of+square-wave+electromagnetic+flowmeter%5BTitle%5D)+AND+%22Surgery%22%5BJournal%5D)">Calibration and use of square-wave electromagnetic flowmeter.</a> Surgery. 54 (4), 621-626 (1963).</li>
<li>Clarke, D. W., Hemp, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Eddy-current+effects+in+an+electromagnetic+flowmeter%5BTitle%5D)+AND+%22Flow+Measurement+and+Instrumentation%22%5BJournal%5D)">Eddy-current effects in an electromagnetic flowmeter.</a> Flow Measurement and Instrumentation. 20 (1), 22-37 (2009).</li>
<li>Maalouf, A. I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((A+validated+model+for+the+zero+drift+due+to+eddy+currents+in+electromagnetic+flowmeters+operating+with+electrolytic+conductors%5BTitle%5D)+AND+%22IEEE+Sensors+Journal%22%5BJournal%5D)">A validated model for the zero drift due to eddy currents in electromagnetic flowmeters operating with electrolytic conductors.</a> IEEE Sensors Journal. 7 (11), 1497-1505 (2007).</li>
<li>Li, B., Yan, Y., Chen, J., Fan, X. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Study+of+the+ability+of+an+electromagnetic+flowmeter+based+on+step+excitation+to+overcome+slurry+noise%5BTitle%5D)+AND+%22IEEE+Access%22%5BJournal%5D)">Study of the ability of an electromagnetic flowmeter based on step excitation to overcome slurry noise.</a> IEEE Access. 8, 126540-126558 (2020).</li>
</ol>

The authors have no conflicts of interest to declare.

There are various implementations of excitation waveforms in electromagnetic flowmeters, among which square wave excitation and step wave excitation are two commonly used types. Square wave excitation is widely adopted due to its simplicity in implementation15. However, this method is prone to inducing eddy current effects during the transient phase of excitation switching, which negatively impacts the stability of the measurement signal16. Additionally, the issue of zero-p...

Electromagnetic flowmeters are flow measurement instruments that operate based on Faraday&#39;s law of electromagnetic induction. Compared with traditional mechanical flowmeters, electromagnetic flowmeters exhibit superior adaptability to various media and have lower requirements for straight pipe sections1. When fluid passes through the pipeline, the electromagnetic flowmeter generates a magnetic field and measures the induced voltage difference in the fluid to calculate the flow velocity2. Electromagnetic flowmeters are particularly suitable for complex environments like those in the chemical and petroleum industries3,4,5. However, due to their operation in harsh environments, the accuracy of electromagnetic flowmeters is easily affected by external interference6, necessitating advancements in detection technologies to improve accuracy7.
Accuracy can be improved in several ways. Optimizing the electrode shape has been shown to effectively enhance precision8, and optimizing the excitation coil&#39;s magnetic field can significantly improve flow measurement accuracy while maintaining magnetic field uniformity9. Additionally, improvements in drive waveforms, such as using dual-frequency driving, can effectively boost precision10. However, these methods still face issues of insufficient adaptability and limited flexibility when dealing with dynamic changes in complex environments.
To improve the performance of electromagnetic flowmeters in complex environments, this study implements two key enhancements aimed at improving accuracy and stability. First, a multi-stage step waveform drive is implemented to suppress high-order harmonics and optimize excitation waveforms. Second, signal processing is enhanced through a combination of Complex Programmable Logic Device (CPLD)-based hardware filtering, rectification, and software-based filtering techniques.
The step waveform drive controlled by the analog switch effectively suppresses high-order harmonics that typically arise in traditional methods. By adjusting the current step amplitude and switching timing, the excitation waveform is optimized, reducing interference with the electrodes. Additionally, after undergoing multi-stage amplification and band-pass filtering, the signal is effectively denoised and its strength is enhanced. Furthermore, the positive and negative half-cycle signals are separated and recombined to ensure signal stability, leading to improved measurement accuracy. The integration of these two enhancements significantly boosts the precision and anti-interference capability of the flowmeter, making it more reliable in complex industrial environments.
In industrial applications, pipelines may not always be fully filled with fluid. If the fluid level falls below the measurement electrodes, the electromagnetic flowmeter cannot provide valid flow velocity readings, making empty pipe detection a critical aspect of system reliability. Traditional empty pipe detection methods primarily rely on conductivity variations, but these are highly susceptible to changes in fluid composition and concentration, leading to instability under dynamic conditions.
To address these challenges, alternative detection strategies have been explored. A method based on electrode capacitance variation has been proposed11, but its performance deteriorates when fluid properties change or when external interference is present. Similarly, an approach utilizing interference amplitude variations has been introduced12; yet its threshold-based detection mechanism is significantly influenced by the type of liquid, limiting its adaptability. These limitations underscore the need for a more robust and adaptive solution.
In this study, a waveform-based empty pipe detection method is also proposed, leveraging the correlation between excitation waveforms and signal processing mechanisms to analyze waveform characteristics. This method effectively improves detection accuracy by eliminating dependencies on amplitude variations or conductivity fluctuations. More importantly, it enhances stability and reliability, particularly in complex industrial environments where fluid properties and external disturbances frequently change.
In summary, this study presents a high-precision electromagnetic flow measurement method that enhances accuracy and stability in complex environments. The proposed method integrates a multi-stage amplification and filtering process with an optimized excitation waveform and CPLD-based rectification to effectively suppress high-order harmonics and reduce noise interference. Additionally, software-based filtering techniques are incorporated to further refine the signal, enhancing measurement stability and reducing the impact of external disturbances. Furthermore, an empty pipe detection approach based on waveform pattern recognition is introduced, providing enhanced detection reliability compared to conventional amplitude- or conductivity-based methods.
It is worth noting that velocity non-uniformity in pipelines can introduce significant measurement errors13. Therefore, this study assumes a uniform velocity distribution as a prerequisite to ensure high-precision flow measurement. Experimental results demonstrate that the proposed approach achieves a measurement accuracy of 0.1% within a velocity range of 0.1-15 m/s, with a repeatability error of less than 1%. These findings validate the effectiveness of the proposed methodology and offer a promising solution for high-precision industrial flow measurement applications. Future research will focus on further evaluating the method&#39;s adaptability to varying fluid properties and external disturbances to enhance its robustness in real-world environments.

<table><tbody><tr><td>Electromagnetic flowmeter</td><td>ABB</td><td>ABB-DN50</td><td>As a standard instrument, it is compared with the instrument in this article.</td></tr><tr><td>Electromagnetic flowmeter sensor</td><td>ABB</td><td>ABB-DN50</td><td>Used for collecting induced electromotive force.</td></tr></tbody></table>

high-precision electromagnetic flowmeter with empty pipe detection via complex programmable logic device-based waveform recognition

High-precision Electromagnetic Flowmeter with Empty Pipe Detection via Complex Programmable Logic Device-based Waveform Recognition

Traditional electromagnetic flowmeters are inherently prone to external interference and uneven velocity distribution during measurement, which severely limits their accuracy. In this study, an improved method is proposed, which optimizes the excitation drive waveform, performs multiple filtering and amplification of the electrode input, and uses a Complex Programmable Logic Device to achieve rapid switching between positive and negative induction signals. This enables smooth rectification and, in combination with software filtering techniques, achieves highly precise performance. Additionally, empty pipe detection is realized by recognizing excitation waveform and input waveform patterns.
Experimental verification shows that the designed electromagnetic flowmeter achieves an accuracy of 0.1% within a flow velocity range of 0.1-15 m/s, with system repeatability errors of less than 1%. The results validate the effectiveness of the proposed method in high-precision flow measurement. The study demonstrates that high-precision detection can be achieved with minimal additional cost, which is important for industry applications.

To ensure standardized experimental conditions and the reliability of results, the experiment utilizes the hydraulic pump shown in Figure 4 to generate a stable standard water flow as the experimental environment. The water flow generated by this hydraulic pump can be approximated as a constant-velocity stream due to its stable power output characteristics, thereby meeting the experimental requirements for uniform fluid delivery. The standard instrument used ...

This study improves electromagnetic flowmeter accuracy by optimizing excitation waveforms, applying multi-stage filtering, and using Complex Programmable Logic Device (CPLD)-based rectification. A novel waveform-based empty pipe detection method enhances reliability. Experiments show 0.1% accuracy within 0.1-15 m/s, validating industrial applicability.

Traditional electromagnetic flowmeters are inherently prone to external interference and uneven velocity distribution during measurement, which severely ...

high-precision-electromagnetic-flowmeter-with-empty-pipe-detection

Research

JoVE Journal

Engineering

We have developed a flow cytometer using laser induced ultrasound to detect circulating melanoma cells as an early indicator of metastatic disease.

Detection and Isolation of Circulating Melanoma Cells using Photoacoustic Flowmetry

In this video we first describe fabrication and operation procedures of a surface acoustic wave (SAW) acoustic counterflow device. We then demonstrate an experimental setup that allows for both qualitative flow visualization and quantitative analysis of complex flows within the SAW pumping device.

Fabrication, Operation and Flow Visualization in Surface-acoustic-wave-driven Acoustic-counterflow Microfluidics

This paper describes the design, construction, and function of a 1,000 m2 facility containing 24 individual 33.6 m2 field plots equipped for measuring total runoff volumes with time and collection of runoff subsamples at selected intervals for quantification of chemical constituents in the runoff water from simulated home lawns.

Design and Construction of an Urban Runoff Research Facility

Spaceflight blood diagnostics need innovation.  Few demonstrations have been published illustrating in-flight, reduced-gravity health diagnostic technology.  Here we present a method for construction and operation of a parabolic flight test rig for a prototype point-of-care flow-cytometry design, with components and preparation strategies adaptable to other setups.

Reduced-gravity Environment Hardware Demonstrations of a Prototype Miniaturized Flow Cytometer and Companion Microfluidic Mixing Technology

Here, we present a protocol for the operation and tuning of parallel segmented flow chromatography columns to enable multiplexed detection.

Tuning a Parallel Segmented Flow Column and Enabling Multiplexed Detection

A scanner for imaging magnetic particles in planar samples was developed using the planar frequency mixing magnetic detection technique. The magnetic intermodulation product response from the nonlinear nonhysteretic magnetization of the particles is recorded upon a two-frequency excitation. It can be used to take 2D images of thin biological samples.

Frequency Mixing Magnetic Detection Scanner for Imaging Magnetic Particles in Planar Samples

Multicolor fluorescence detection in droplet microfluidics typically involves bulky and complex epifluorescence microscope-based detection systems. Here we describe a compact and modular multicolor detection scheme that utilizes an array of optical fibers to temporally encode multicolor data collected by a single photodetector.

Multicolor Fluorescence Detection for Droplet Microfluidics Using Optical Fibers

We demonstrate a microfluidic platform with an integrated surface electrode network that combines resistive pulse sensing (RPS) with code division multiple access (CDMA), to multiplex detection and sizing of particles in multiple microfluidic channels.

Microfluidic Platform with Multiplexed Electronic Detection for Spatial Tracking of Particles

This protocol shows how to apply ultrafast ultrasound Doppler imaging to quantify blood flows. After a 1 s long acquisition, the experimenter has access to a movie of the full field of view with axial velocity values for each pixel every ≈0.3 ms (depending on the ultrasound time of flight).

Blood Flow Imaging with Ultrafast Doppler

This protocol describes methods for obtaining weir flow equation coefficients for a V-notch weir within a drainage control structure using (1) a laboratory calibration procedure and (2) an online tool, the "Weir Flow Equation Coefficients Calculator", developed by the authors. These methods apply to flows contained within the V-notch and overtopping flows.

Parameterizing V-notch Weir Equations for Flow Monitoring in a Drainage Control Structure

Discover how waveform recognition enhances electromagnetic flowmeter precision using CPLD-based signal processing. This method achieves 0.1% accuracy across 0.1-15 m/s flow rates with reliable empty pipe detection.

High-precision Electromagnetic Flowmeter with Empty Pipe Detection via Complex Programmable Logic Device-based Waveform Recognition (Video) | JoVE Journal

High-precision Electromagnetic Flowmeter with Empty Pipe Detection via Complex Programmable Logic Device-based Waveform Recognition

Explore More Videos