Name: Efficient Purification of Elastin-Like Polypeptides (ELPs) from E. coli Using an Organic Solvent-based Extraction and Precipitation Method (Video) | JoVE Journal
Uploaded: 2026-01-09T13:05:00.000+00:00
Duration: 6 min 30 s
Description: Learn a rapid organic solvent-based extraction method to purify elastin-like polypeptides from E. coli while retaining fusion protein activity and controlling endotoxin levels for scalable biomaterial production.

ai_agent_IP

ai_agent

maintenance

instantTrialDurationMinutes

isBiopharma

enableNewMyJoveSectionDesign

educationFeatures

seoMetaApi

ai_copilot_institution_blacklist

ai_chat_institution_blacklist

freeAccessWindow

ssoRoleCapture

scheduledMaintenanceBanner

joveLabsFeatures

disable_autoplay_for_bots

extended_trial_duration

5 minutes

We thank the Purdue University Institute for Cancer Research and the NIH CCSG program (CA23168) for support of this work.

1. Materials preparation
<ol>
	<li>Bacterial strain: Use Escherichia coli BL21(DE3) chemically competent cells as the expression host. 
	NOTE: They were selected due to their high transformation efficiency and suitability for recombinant protein production.</li>
	<li>Expression plasmid: Use pET21(+) vector encoding ELP-I-Cm2 fusion protein with ampicillin-resistance9. Purchase the plasmid vector from addgene. Insert the Cm2 gene using the BsrG I site at the end of the intein. 
	NOTE: The plasmid DNA sequence for this protein is provided in Supplementary File 1.</li>
	<li>Growth media: Terrific Broth (TB) media preparation for 1200 mL media
	<ol>
		<li>Prepare media (Part 1) by adding 16 g of Tryptone, 32 g of Yeast Extract, 16 g of proline, 6.8 mL of glycerol to 1100 mL of ultrapure water. Mix thoroughly to dissolve all components. Adjust the final volume to 1200 mL using ultrapure water.</li>
		<li>Prepare the potassium phosphate buffer (Part 2) by mixing 23.1 g of KH2PO4 and 125.4 g of K2HPO4, and then bring the volume to 1 L with ultrapure water.</li>
		<li>Autoclave the components (Parts 1 and 2) separately. After autoclaving, assemble the media by dividing the TB base into four 300 mL aliquots. Add 33 mL of phosphate buffer to each aliquot under sterile conditions.</li>
	</ol>
	</li>
	<li>Additives for expression
	<ol>
		<li>IPTG: Perform induction using IPTG at a final concentration of 1.2 mM (e.g., add 396 &#181;L of 1 M IPTG to 330 mL culture).</li>
		<li>Antibiotic: Add ampicillin to a final concentration of 100 &#181;g/mL to ensure plasmid selection.</li>
	</ol>
	</li>
	<li>Lysis buffer (pH 8.5): Prepare the lysis buffer with 10 mM Tris Base and 22 mM ethylenediaminetetraacetic acid (EDTA). Adjust the pH to 8.5 using HCl or NaOH as required.</li>
	<li>Organic solvents for extraction
	<ol>
		<li>Employ a variety of organic solvents (Table 1) to extract the ELP-I-Cm2 fusion protein from inclusion bodies. Test these solvents both individually and in binary combinations (1:1 vol: vol) to evaluate efficiency and ELP purity. 
		NOTE: All solvents used were HPLC Grade, except Acetonitrile (Optima grade), Ethanol (USP grade), and 1-Butanol (99% pure). 
		CAUTION: All solvents listed above are volatile and flammable. They must be handled inside a chemical fume hood using appropriate PPE (lab coat, nitrile gloves, and eye protection). Many types of plasticware are not compatible with organic solvents. Polypropylene plasticware is highly recommended for extraction-precipitation experiments with organic solvents; otherwise, the plasticware to be used should be tested without a valuable sample to ensure that it is appropriate for use. The disposal of solvent waste should follow the procedures outlined in the relevant institutional hazardous waste policies.</li>
	</ol>
	</li>
</ol>
2. Cell lysis and preparation (Figure 4A)
<ol>
	<li>Resuspension: Weigh out 1 g of cell pellet and resuspend it in 4 mL of freshly prepared lysis buffer. Vortex gently until the pellet is fully dispersed and mixed with the buffer.</li>
	<li>Enzymatic lysis: Add ~5 mg of lysozyme to assist in cell wall digestion. Allow the suspension to incubate at 4 &#176;C for 1 h. This facilitates partial enzymatic digestion to boost cell lysis.</li>
	<li>Sonication: After incubation, sonicate the sample to complete cell lysis and shear genomic DNA. Use short bursts of microtip probe sonication (350 W device, power level 3) with intervals to avoid overheating (e.g., 5 s on/10 s off, repeated as needed). Sonicate the samples on ice and apply the ultrasonic energy until a uniform lysate free of visible particulates is obtained, typically for about 5-8 min. 
	NOTE: After sonication is complete, store a 100 &#956;L aliquot of the sample (or the lysate) for ELP expression analysis to monitor purification progress before and after the extraction and precipitation steps.</li>
	<li>Centrifugation and expression analysis.
	<ol>
		<li>Clarify the lysate by centrifugation at 10,000 g for 10 min at 20 &#176;C, then carefully separate the supernatant (soluble fraction) from the pellet (insoluble/inclusion-body fraction).</li>
		<li>Assess ELP expression in both fractions by SDS-PAGE: withdraw an aliquot (e.g., 10-20 &#181;L) of the supernatant and resuspend an equivalent pellet mass in lysis buffer (50 mM Tris-HCl pH 8.0, 150 mM NaCl, 1 mM EDTA) to the same volume; mix each with 4x Laemmli buffer to a final 1x, heat at 95 &#176;C for 5 min, and load equal amounts to enable direct comparison.</li>
		<li>If the target ELP is predominantly soluble, proceed with the organic-solvent extraction using the clarified supernatant. If it is predominantly insoluble (inclusion bodies), discard the supernatant and continue with the inclusion-body workflow (washing/solubilization and extraction) by processing the pellet by organic solvent extraction.</li>
	</ol>
	</li>
	<li>Pellet washing and drying (only for ELP in inclusion bodies): Invert the centrifuge tubes to allow gravity-assisted drainage of any residual lysis buffer. Once visible liquid has drained (~1-2 min), leave the pellet to air dry at room temperature for 5-10 min, ensuring it is free of excess moisture before proceeding to organic extraction.</li>
</ol>
3. Organic extraction (Figure 4B)
NOTE: Each ELP has its own preferred solvent condition for yielding high-purity extractions (e.g., AC performance in Figure 1). Therefore, an initial screen of 28 organic solvents and their combinations should be tested, and the isolates analyzed by PAGE to identify the optimal solubilization efficiency conditions for the construct of interest.
<ol>
	<li>Solvent screening. Screen the individual solvents shown in step 1.6 and their 1:1 (v/v) binary solvent mixtures. Evaluate additional mixtures (e.g., 1:2, 2:1, 4:1) to enhance the effectiveness of the process. 
	NOTE: At present, there are no guidelines for rationally selecting the most effective solvents or combinations, so a screening campaign is needed to select from solvents that have previously met with success in solubilizing hydrophobic protein aggregates. The final selection of the organic solvent extractant to be used for purification should be based on SDS-PAGE analysis of the isolates obtained from this screen.</li>
	<li>Extraction procedure
	<ol>
		<li>Solvent addition: Add 4 mL of organic solvent or solvent mixture to the air-dried pellet/supernatant obtained after lysis. For mixed combinations, ensure precise volumetric ratios (e.g., 2 mL of each for a 1:1 combination).</li>
		<li>Vortexing: Vortex the suspension vigorously for 1 min to ensure thorough mixing and penetration of solvent into the pellet.</li>
		<li>Incubation (Retention time): Allow the suspension to incubate at 20 &#176;C for 5 min, ensuring sufficient interaction time for extracellular proteins to aggregate and sediment while the ELPs solubilize in the organic phase.</li>
		<li>Centrifugation: Centrifuge the mixture at 13,000&#160;&#215;&#160;g for 10 min at 20 &#176;C to separate solubilized proteins from residual insoluble debris.</li>
		<li>Supernatant collection: Carefully collect the supernatant without disturbing the pellet. The supernatant contains the solubilized ELP, while the pellet contains host cell proteins, nucleic acids, and lipids.</li>
		<li>Volume measurement: Record the volume of the recovered supernatant precisely. Care should be taken to ensure the supernatant is free from any pellet particles. This measurement is critical for the downstream precipitation step.</li>
	</ol>
	</li>
</ol>
4. Protein precipitation
<ol>
	<li>Anti-solvent addition: Add acetone or acetonitrile to the organic supernatant at 2.33 times the measured volume of the supernatant.</li>
	<li>Incubation: Incubate the mixture at 20 &#176;C for 5-7 min.</li>
	<li>Centrifugation: Centrifuge at 10,000 g for 10 min at 20 &#176;C.</li>
	<li>Pellet handling: After centrifugation, carefully discard the supernatant and air dry the sample by leaving the tube uncapped under a gentle nitrogen gas stream for 10-15 min, or incubate by placing uncapped centrifuge tubes upside down on lint-free wipes in a fume hood for 1 h at 20 &#176;C (do not apply heat).</li>
</ol>
5. Protein pellet handling and resuspension
<ol>
	<li>Resuspension: Following precipitation and air-drying, resuspend the protein pellet in 50 &#181;L of phosphate-buffered saline (PBS). Gently pipette up and down to ensure the pellet is fully dissolved.</li>
	<li>Storage: Store the resuspended protein at -20 &#176;C for short- to medium-term use. Avoid repeated freeze-thaw cycles to maintain protein functional integrity.</li>
</ol>
6. Validation via SDS-PAGE
<ol>
	<li>Sample preparation: Mix the purified protein with 4&#215; SDS-PAGE loading buffer in a 3:1 ratio and vortex briefly to ensure homogeneity.</li>
	<li>Electrophoresis conditions: Load onto a 15% SDS-PAGE gel for ELP-I-Cm2 and run at 100-120 V until the tracking dye reaches the bottom. 
	NOTE: The % crosslinking in the gel should be based on the size of the ELP construct of interest</li>
	<li>Staining and visualization: Stain the gel using Instant Blue Coomassie stain or other suitable stain for 2 h at 20 &#176;C. Destain by rinsing with deionized water until a clear background is achieved. Test the protein isolated in activity assays to validate that activity retention has occurred after the organic solvent extraction-precipitation purification workflow.</li>
</ol>

<ol><li>Despanie, J., Dhandhukia, J. P., Hamm-Alvarez, S. F., MacKay, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Elastin-like+polypeptides%3A+therapeutic+applications+for+an+emerging+class+of+nanomedicines%5BTitle%5D)+AND+%22J+Control+Release%22%5BJournal%5D)">Elastin-like polypeptides: therapeutic applications for an emerging class of nanomedicines.</a> J Control Release. 240, 93-108 (2016).</li>
<li>MacEwan, S. R., Chilkoti, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Applications+of+elastin-like+polypeptides+in+drug+delivery%5BTitle%5D)+AND+%22J+Control+Release%22%5BJournal%5D)">Applications of elastin-like polypeptides in drug delivery.</a> J Control Release. 190, 314-330 (2014).</li>
<li>Jenkins, I. C., Milligan, J. J., Chilkoti, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Genetically+encoded+elastin-like+polypeptides+for+drug+delivery%5BTitle%5D)+AND+%22Adv+Healthc+Mater%22%5BJournal%5D)">Genetically encoded elastin-like polypeptides for drug delivery.</a> Adv Healthc Mater. 10 (13), e2100209(2021).</li>
<li>Ju, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Molecular+targeting+of+immunosuppressants+using+a+bifunctional+elastin-like+polypeptide%5BTitle%5D)+AND+%22Bioconjug+Chem%22%5BJournal%5D)">Molecular targeting of immunosuppressants using a bifunctional elastin-like polypeptide.</a> Bioconjug Chem. 30 (9), 2358-2372 (2019).</li>
<li>Nettles, D. L., Chilkoti, A., Setton, L. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Applications+of+elastin-like+polypeptides+in+tissue+engineering%5BTitle%5D)+AND+%22Adv+Drug+Deliv+Rev%22%5BJournal%5D)">Applications of elastin-like polypeptides in tissue engineering.</a> Adv Drug Deliv Rev. 62 (15), 1479-1485 (2010).</li>
<li>Meyer, D. E., Chilkoti, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Purification+of+recombinant+proteins+by+fusion+with+thermally+responsive+polypeptides%5BTitle%5D)+AND+%22Nat+Biotechnol%22%5BJournal%5D)">Purification of recombinant proteins by fusion with thermally responsive polypeptides.</a> Nat Biotechnol. 17 (11), 1112-1115 (1999).</li>
<li>VerHeul, R., Sweet, C., Thompson, D. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Rapid+and+simple+purification+of+elastin-like+polypeptides+directly+from+whole+cells+and+cell+lysates+by+organic+solvent+extraction%5BTitle%5D)+AND+%22Biomater+Sci%22%5BJournal%5D)">Rapid and simple purification of elastin-like polypeptides directly from whole cells and cell lysates by organic solvent extraction.</a> Biomater Sci. 6 (4), 863-876 (2018).</li>
<li>Sweet, C., Aayush, A., Readnour, L., Solomon, K. V., Thompson, D. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Development+of+a+fast+organic+extraction-precipitation+method+for+improved+purification+of+elastin-like+polypeptides+that+is+independent+of+sequence+and+molecular+weight%5BTitle%5D)+AND+%22Biomacromolecules%22%5BJournal%5D)">Development of a fast organic extraction-precipitation method for improved purification of elastin-like polypeptides that is independent of sequence and molecular weight.</a> Biomacromolecules. 22 (5), 1990-1998 (1990).</li>
<li>Darji, S., Aayush, A., Estes, K. M., Strock, J. D., Thompson, D. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Unravelling+the+mechanism+of+elastin-like+polypeptide-enzyme+fusion+stabilization+in+organic+solvents%5BTitle%5D)+AND+%22Biomacromolecules%22%5BJournal%5D)">Unravelling the mechanism of elastin-like polypeptide-enzyme fusion stabilization in organic solvents.</a> Biomacromolecules. 25 (1), 272-281 (2024).</li>
<li>Urry, D. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Physical+chemistry+of+biological+free+energy+transduction+as+demonstrated+by+elastic+protein-based+polymers%5BTitle%5D)+AND+%22J+Phys+Chem+B%22%5BJournal%5D)">Physical chemistry of biological free energy transduction as demonstrated by elastic protein-based polymers.</a> J Phys Chem B. 101 (51), 11007-11028 (1997).</li>
<li>Guo, Y., Liu, S., Jing, D., Liu, N., Luo, X. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((The+construction+of+elastin-like+polypeptides+and+their+applications+in+drug+delivery+system+and+tissue+repair%5BTitle%5D)+AND+%22J+Nanobiotechnology%22%5BJournal%5D)">The construction of elastin-like polypeptides and their applications in drug delivery system and tissue repair.</a> J Nanobiotechnology. 21, 418(2023).</li>
<li>Yi, A., Sim, D., Lee, S. -B., Sarangthem, V., Park, R. -W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Application+of+bioengineered+elastin-like+polypeptide-based+system+for+targeted+gene+delivery+in+tumor+cells%5BTitle%5D)+AND+%22Biomater+Biosyst%22%5BJournal%5D)">Application of bioengineered elastin-like polypeptide-based system for targeted gene delivery in tumor cells.</a> Biomater Biosyst. 6, 100050(2022).</li>
<li>Clement, H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Comparison+between+the+recombinant+expression+and+chemical+synthesis+of+a+short+cysteine-rich+insecticidal+spider+peptide%5BTitle%5D)+AND+%22J+Venom+Anim+Toxins+Trop+Dis%22%5BJournal%5D)">Comparison between the recombinant expression and chemical synthesis of a short cysteine-rich insecticidal spider peptide.</a> J Venom Anim Toxins Trop Dis. 21, 19(2015).</li>
<li>Miranda, L. P., Alewood, P. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Accelerated+chemical+synthesis+of+peptides+and+small+proteins%5BTitle%5D)+AND+%22Proc+Natl+Acad+Sci+U+S+A%22%5BJournal%5D)">Accelerated chemical synthesis of peptides and small proteins.</a> Proc Natl Acad Sci U S A. 96 (4), 1181-1186 (1999).</li>
<li>Eweje, F., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Self-assembling+protein+nanoparticles+for+cytosolic+delivery+of+nucleic+acids+and+proteins%5BTitle%5D)+AND+%22Nat+Biotechnol%22%5BJournal%5D)">Self-assembling protein nanoparticles for cytosolic delivery of nucleic acids and proteins.</a> Nat Biotechnol. , (2025).</li>
<li>Hassouneh, W., Christensen, T., Chilkoti, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Elastin-like+polypeptides+as+a+purification+tag+for+recombinant+proteins%5BTitle%5D)+AND+%22Curr+Protoc+Protein+Sci%22%5BJournal%5D)">Elastin-like polypeptides as a purification tag for recombinant proteins.</a> Curr Protoc Protein Sci. 6 (11), 1-16 (2010).</li>
<li>Yakhnin, A. V., Vinokurov, L. M., Surin, A. K., Alakhov, Y. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Green+fluorescent+protein+purification+by+organic+extraction%5BTitle%5D)+AND+%22Protein+Expr+Purif%22%5BJournal%5D)">Green fluorescent protein purification by organic extraction.</a> Protein Expr Purif. 14 (3), 382-386 (1998).</li>
<li>Aayush, A., Darji, S., Estes, K. M., Yeh, E., Thompson, D. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Development+of+an+elastin-like+polypeptide-based+nucleic+acid+delivery+system+targeted+to+EGFR%2B+bladder+cancer+cells+using+a+layer-by-layer+approach%5BTitle%5D)+AND+%22Biomacromolecules%22%5BJournal%5D)">Development of an elastin-like polypeptide-based nucleic acid delivery system targeted to EGFR+ bladder cancer cells using a layer-by-layer approach.</a> Biomacromolecules. 25 (9), 5729-5744 (2024).</li>
<li>Christensen, T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Fusion+order+controls+expression+level+and+activity+of+elastin-like+polypeptide+fusion+proteins%5BTitle%5D)+AND+%22Protein+Sci%22%5BJournal%5D)">Fusion order controls expression level and activity of elastin-like polypeptide fusion proteins.</a> Protein Sci. 18 (7), 1377-1387 (2009).</li>
</ol>

The authors have nothing to disclose.

ITC has previously been used for non-chromatographic purification of ELP19; however, it can be a time-consuming method and low-yielding process. In the methods detailed above, we describe an approach for the rapid purification of an ELP-I-Cm2 fusion protein, demonstrating how the organic solvent-based extraction-precipitation method can be effectively used for the purification of a wide variety of ELP and ELP fusions. The organic solvent protocol is not only faster than ITC, but also much more eff...

Elastin-like polypeptides (ELPs) are biopolymers composed of repeating (VPGXG)n motifs1,2,3,4,5,6,7,8,9. The guest residue X in the pentapeptide unit can be any amino acid other than proline. Variations in X can be used to tune the hydrophobicity, thermal transition behavior, and functional characteristics of the ELP construct to create modular biocompatible materials that have been widely explored in various biomedical applications10,11,12 .
While chemical synthesis can be used to produce short peptides, it is poorly suited for high molecular weight ELPs or for retaining the functionality of fusion proteins13,14. For reasons such as these, ELPs are typically expressed recombinantly in E. coli, allowing for sequence-defined production in large quantities. However, this approach can also bring challenges. During their expression in E. coli, ELPs often accumulate within dense inclusion bodies, requiring efficient recovery strategies to extract functional protein15. Moreover, bacterial expression introduces unwanted biomolecules such as host cell proteins, nucleic acids, and lipopolysaccharides (endotoxins) that must be separated from the ELP during purification. Traditional solubilization strategies using detergents (e.g., sodium dodecyl sulphate (SDS) or Triton X-100) or chaotropic agents like urea have met with limited success for our ELP fusion sequences. In our experience, Triton and urea failed to extract ELPs from the pellet phase, while SDS enabled partial solubilization but interfered with downstream affinity purification and was difficult to fully remove from the hydrophobic ELP sequence.
To date, inverse transition cycling (ITC) remains the most widely used purification method for ELPs. This technique exploits their LCST behavior to selectively precipitate and resolubilize the ELP across temperature and salt gradients16. However, with lower molecular weight proteins, ITC is a time-consuming multi-step process that is poorly suited for ELPs trapped in inclusion bodies, requiring multiple ITC cycles that can lead to protein loss at each step7,16.
To overcome these limitations, we adopted an organic solvent-based extraction and precipitation workflow. While Yakhnin&#160;et al. first demonstrated a hydrophobicity-driven partitioning strategy for GFP purification using ethanol and salt gradients in 199817, the novel method we developed employs organic solvent blends to directly extract ELP fusion proteins from E. coli cells7. Sweet et al. and Darji et al. adapted this approach to ELP fusions, showing that organic solvent extraction enables rapid recovery of functional ELPs while maintaining structural integrity and bioactivity8,9. This approach uses sonication and organic solvents to lyse bacterial cells and extract ELPs in a single operation, while precipitating most of the host proteins and nucleic acids. Recovery of the ELP-rich organic phase, followed by rapid precipitation to isolate the ELPs from solvents and solubilized impurities, yields highly pure ELPs. This approach is also capable of yielding pure ELP from E. coli pellets with endotoxin levels below 1 EU/mL in under three hours7,8.
Studies to date show that this method is capable of purifying ELP constructs and ELP fusion proteins of varying molecular weight and isoelectric point, without multiple ITC cycles or solubilization steps (Figure 1). Atomic force microscopy (AFM) and transmission electron microscopy (TEM) imaging suggest that ELP-fusion proteins purified in this manner form reverse micelle-like structures (Figure 2), thus helping to preserve the structure and function of ELP fusion domains during organic solvent extraction. This streamlined workflow enables faster and more reliable ELP purification for diverse biomedical applications7,8. Notably, Aayush et al. reported that ELP constructs purified by this method retained epidermal growth factor receptor-binding function18, highlighting the point that this method not only produces pure ELP material, but also maintains the activity of the fusion protein domain.
As a further demonstration of the utility of this method in isolating an ELP-enzyme fusion, we describe a detailed organic solvent-based method to purify an ELP-Intein-Chorismate mutase 2 (ELP-I-Cm2) construct (Figure 3). This method may be useful for rapid purification of other ELPs for drug delivery and nanomaterials applications.

<table><tbody><tr><td>2-Mercaptoethanol</td><td>Bio-Rad</td><td>161-0710</td><td>SDS-PAGE Component</td></tr><tr><td>30% Acrylamide/Bis-acrylamide</td><td>TCI</td><td>A3218</td><td>SDS-PAGE Component</td></tr><tr><td>Acetone</td><td>Fisher Scientific</td><td>A949</td><td>Organic Solvent</td></tr><tr><td>Acetonitrile</td><td>Fisher Scientific</td><td>A996</td><td>Organic Solvent</td></tr><tr><td>Ampicilin</td><td>Gold Bio- Gold Biotechnology</td><td>A-301-25</td><td>Antibiotic</td></tr><tr><td>APS (Ammonium Persulfate)</td><td>Bio-Rad</td><td>1610700</td><td>SDS-PAGE Component</td></tr><tr><td>Butanol</td><td>Fisher Scientific</td><td>L13171</td><td>Organic Solvent</td></tr><tr><td>EDTA</td><td>Fisher Bioreagents</td><td>BP118-500</td><td>Lysis Buffer Component</td></tr><tr><td>Ethanol</td><td>Decon Labs</td><td>UN1170</td><td>Organic Solvent</td></tr><tr><td>Ethyl Acetate</td><td>Fisher Scientific</td><td>E195</td><td>Organic Solvent</td></tr><tr><td>Glycerol</td><td>Research Products International</td><td>G22020-0.5</td><td>Terrific Broth (TB) Media Component</td></tr><tr><td>Hydrochloric Acid</td><td>Fisher Scientific</td><td>A144SI-212</td><td>Lysis Buffer Component</td></tr><tr><td>Instant Coomasie stain</td><td>Abcam</td><td>ab119211</td><td>SDS-PAGE Component</td></tr><tr><td>IPTG</td><td>Gold Bio- Gold Biotechnology</td><td>12481C25</td><td>Protein Expression Component</td></tr><tr><td>Isopropanol</td><td>Fisher Scientific</td><td>A451-1</td><td>Organic Solvent</td></tr><tr><td>K2HPO4 (Potassium Phosphate Monobasic)</td><td>Wards&#039; Science</td><td>470302-246</td><td>Part 2 Buffer Component</td></tr><tr><td>KH2PO4 (Potasium Phosphate Dibasic)</td><td>Wards&#039; Science</td><td>470302-254</td><td>Part 2 Buffer Component</td></tr><tr><td>L-Proline</td><td>Research Products International</td><td>P5200-500.0</td><td>Terrific Broth (TB) Media Component</td></tr><tr><td>Lysozyme</td><td>Gold Bio- Gold Biotechnology</td><td>L-040-1</td><td>Lysis Buffer Component</td></tr><tr><td>Methanol</td><td>Fisher Scientific</td><td>A452</td><td>Organic Solvent</td></tr><tr><td>Native Sample Buffer</td><td>Bio-Rad</td><td>161-0738</td><td>SDS-PAGE Component</td></tr><tr><td>Protein Ladder</td><td>Gold Bio- Gold Biotechnology</td><td>P008-500</td><td>SDS-PAGE Component</td></tr><tr><td>Resolving Gel Buffer</td><td>Bio-Rad</td><td>1610798</td><td>SDS-PAGE Component</td></tr><tr><td>Sodim Dodecyl Sulfate (SDS)</td><td>Thermo Scientific</td><td>J18220-36</td><td>SDS-PAGE Component</td></tr><tr><td>Sodium Hydroxide</td><td>Fisher Scientific</td><td>S318-500</td><td>Lysis Buffer Component</td></tr><tr><td>Stacking Gel Buffer</td><td>Bio-Rad</td><td>1610799</td><td>SDS-PAGE Component</td></tr><tr><td>TEMED</td><td>Bio-Rad</td><td>1610801</td><td>SDS-PAGE Component</td></tr><tr><td>Tris Base</td><td>Fisher Bioreagents</td><td>BP-152</td><td>Lysis Buffer Component</td></tr><tr><td>Tryptone</td><td>Research Products International</td><td>T60065-1000.0</td><td>Terrific Broth (TB) Media Component</td></tr><tr><td>Yeast Extract</td><td>Research Products International</td><td>Y20025-1000.0</td><td>Terrific Broth (TB) Media Component</td></tr></tbody></table>

efficient purification of elastin-like polypeptides (elps) from e. coli using an organic solvent-based extraction and precipitation method

Efficient Purification of Elastin-Like Polypeptides (ELPs) from E. coli Using an Organic Solvent-based Extraction and Precipitation Method

Elastin-like polypeptides (ELP) are engineered biopolymers built from repetitive pentapeptide sequences that mimic motifs found in mammalian tropoelastin. Their unique characteristics make them ideal candidates for a wide array of biomedical applications, ranging from drug and gene delivery to tissue engineering and targeted molecular imaging. Conventional purification approaches from Escherichia coli (E. coli) expression can be ineffective for ELP due to the formation of inclusion bodies. Other methods, such as inverse transition cycling (ITC), utilize the lower critical solution temperature (LCST) properties of ELP to separate it from contaminants such as lipopolysaccharides (LPS), but typically require multiple heating and cooling steps that are time-consuming and can result in low recoveries depending on the sequence, concentration, and molecular weight of the ELP construct. To tackle these challenges, we have developed an organic solvent-based extraction-precipitation workflow that exploits the intrinsic hydrophobicity of ELP to enable rapid, robust, and broadly applicable purification directly from E. coli cell pellets. This method uses polar organic solvents to aid in cell disruption and selectively solubilize ELP in a single step. A subsequent precipitation step effectively removes residual organic solvents, low-molecular-weight impurities, and endotoxins, yielding highly pure ELP with LPS levels below 1 EU/mL in under 3 h. Atomic force microscopy data suggest that ELP-fusion proteins purified in this manner can self-assemble into reverse micelle-like structures that retain fusion protein function. This rapid purification method offers researchers a straightforward and potentially scalable way to purify ELP, creating new possibilities for using ELP and their fusion proteins as flexible building blocks for material and biomedical applications.

After going through the final phases of the protocol, the next step is visualization of the extraction-precipitation outcome by SDS-PAGE analysis and Coomassie blue staining. When there is a lysis step prior to organic extraction, a prominent ELP band should be apparent. In the case of ELP-I-Cm2, this band appears at 100 kDa (Figure 3A).
Screening of different organic solvent combinations demonstrated variable extraction efficiencies (Figure 3...

This protocol describes a rapid, reproducible organic solvent-based extraction and precipitation method for purifying elastin-like polypeptide (ELP) from Escherichia coli, providing a potentially scalable alternative to conventional ELP purification methods.

Elastin-like polypeptides (ELP) are engineered biopolymers built from repetitive pentapeptide sequences that mimic motifs found in mammalian tropoelastin. ...

The scope of this research asks whether solvent extraction precipitation can rapidly purify ELP fusion proteins while retaining fusion activity function. Recent developments include rapid solvent-based ELP purification with improved endotoxin control, enabling active self-assembling nanoparticles for targeted nucleic acid delivery. To begin, weigh out one gram of the E.coli cell pellet.Add four milliliters of freshly prepared lysis buffer to resuspend the cell pellet. Vortex gently until the pellet is fully dispersed and mixed with the buffer. Add approximately five milligrams of lysozyme to the resuspended cells to assist in cell wall digestion.Then place the tube on ice and incubate for one hour. Following incubation, sonicate the sample using a micro-tip probe sonicater in five-second intervals. Keep the sample on ice and continue sonication until a uniform lysate free of visible particulates is obtained typically for five to eight minutes.Centrifuge the sonicate lysate at 10, 000 G for 10 minutes at 20 degrees Celsius to clarify it. Then carefully separate the supernatant containing the soluble fraction from the pellet containing the insoluble fraction. Pipette out 10 to 20 microliters of the supernatant and resuspend an equivalent mass of the pellet in lysis buffer.Mix both fractions with 4x Laemmli buffer to a final 1x concentration. Then heat the suspension at 95 degrees Celsius for five minutes. If the ELP is predominantly soluble, proceed with organic solvent extraction using the clarified supernatant.To perform solvent extraction, add four milliliters of organic solvent or solvent mixture to the air-dried pellet or supernatant. For binary solvent mixtures, use exact volumetric ratios, such as two milliliters of each for a one-to-one combination. Vortex the suspension vigorously for one minute to ensure proper solvent penetration into the pellet.Now, incubate the mixture at 20 degrees Celsius for five minutes to allow aggregation of extracellular proteins and solubilization of ELP in the organic phase. Centrifuge the sample at 13, 000 G for 10 minutes at 20 degrees Celsius to separate solubilized proteins from insoluble debris. Carefully collect the supernatant without disturbing the pellet as it contains the solubilized ELP.Measure the volume of the collected supernatant precisely to prepare for precipitation. Next, add acetone or acetonitrile to the supernatant at 2.33 times its volume for protein precipitation. Incubate the mixture at 20 degrees Celsius for five to seven minutes.Centrifuge the sample at 10, 000 G for 10 minutes at 20 degrees Celsius. Then discard the supernatant and air dry the pellet either under a gentle nitrogen gas stream for 10 to 15 minutes or by placing uncapped centrifuge tubes upside down on lint-free wipes in a fume hood for one hour at 20 degrees Celsius. Resuspend the dried protein pellet in 50 microliters of PBS.Then pipette up and down gently to ensure complete dissolution. Store the resuspended protein at minus 20 degrees Celsius for short-to-medium term use. To perform validation using SDS-PAGE, first mix the purified protein with 4x SDS-PAGE loading buffer.Vortex the solution briefly for homogeneity. Load the sample onto a 10%SDS-PAGE gel for ELP and TEEN fused to chorismate mutase. Run the gel at 100 to 120 volts until the tracking dive reaches the bottom.Now, stain the gel using InstantBlue Coomassie stain or a suitable alternative for two hours at 20 degrees Celsius. Rinse with deionized water until a clear background is achieved. A prominent ELP and TEEN fused to chorismate mutase band appeared at 100 kilodaltons following a lysis step prior to organic extraction.Different organic solvent combinations resulted in varied extraction efficiencies and purities of ELP and TEEN fused to chorismate mutase. The AG and BG one-to-one mixtures yielded the highest protein recovery. The AG solvent extracted ELP and TEEN fused to chorismate mutase retained approximately 80%of its enzymatic activity compared to ITC-purified protein, while BG retained around 50%activity, and the V40 control showed almost no activity.Significant findings include demonstrating that organic solvent extraction precipitation rapidly purifies ELP fusions with low endotoxin while preserving fusion protein activity. This protocol addresses the lack of rapid detergent-free methods to purify ELP fusions from E.Coli with or without inclusion bodies without multi-step ITC. This protocol offers a single-step rapid purification directly from E.coli pellets, yielding highly pure, low-endotoxin ELP fusions while preserving fusion protein function.

efficient-purification-elastin-like-polypeptides-elps-from-e-coli

Research

JoVE Journal

Biochemistry

Here, we describe a protocol for the purification of highly active Hsp104, a hexameric AAA+ protein from yeast, which couples ATP hydrolysis to protein disaggregation. This scheme exploits a His6-tagged construct for affinity purification from E. coli followed by anion-exchange chromatography, His6-tag removal with TEV protease, and size-exclusion chromatography.

Purification of Hsp104, a Protein Disaggregase

In this video, we demonstrate reversed-phase high-performance liquid chromatography to purify peptides from a digested protein lysate mixture. These purified peptides are then lyophilized and stored for downstream applications. Analysis of peptides can help understand the mechanics involved in cellular signaling and cancer.

Peptide Purification: An RP-HPLC-based Technique to Extract Peptides from Digested Protein Lysates

Elastin-like polypeptides are stimulus-responsive biopolymers with applications ranging from recombinant protein purification to drug delivery. This protocol describes the purification and characterization of elastin-like polypeptides and their peptide or protein fusions from Escherichia coli using their lower critical solution temperature phase transition behavior as a simple alternative to chromatography.

Non-chromatographic Purification of Recombinant Elastin-like Polypeptides and their Fusions with Peptides and Proteins from Escherichia coli

Recombinant technologies have enabled material designers to create novel artificial proteins with customized functionalities for tissue engineering applications. For example, artificial extracellular matrix proteins can be designed to incorporate structural and biological domains derived from native ECMs. Here, we describe the construction and purification of aECM proteins containing elastin-like repeats.

Design and Construction of Artificial Extracellular Matrix (aECM) Proteins from Escherichia coli for Skin Tissue Engineering

The protocol provides a methodology to solubilize aerobic granular sludge in order to extract alginate-like extracellular polymers (ALE).

Extraction of Structural Extracellular Polymeric Substances from Aerobic Granular Sludge

Recombinant protein-engineered hydrogels are advantageous for 3D cell culture as they allow for complete tunability of the polymer backbone and therefore, the cell microenvironment. Here, we describe the process of recombinant elastin-like protein purification and its application in 3D hydrogel cell encapsulation.

Production of Elastin-like Protein Hydrogels for Encapsulation and Immunostaining of Cells in 3D

Presented here are protocols for the creation of peptide-based small unilamellar vesicles capable of growth. To facilitate in vesiculo production of the membrane peptide, these vesicles are equipped with a transcription-translation system and the peptide-encoding plasmid.

In Vesiculo Synthesis of Peptide Membrane Precursors for Autonomous Vesicle Growth

At the interface of organic and aqueous solvents, tailored amphiphilic elastin-like proteins assemble into complex supramolecular structures such as vesicles, fibers and coacervates triggered by environmental parameters. The described assembly protocols yield Protein Membrane-Based Compartments (PMBCs) with tunable properties, enabling the encapsulation of various cargo.

Directed Assembly of Elastin-like Proteins into defined Supramolecular Structures and Cargo Encapsulation In Vitro

Bacteria secrete nanometer-sized extracellular vesicles (EVs) carrying bioactive biological molecules. EV research focuses on understanding their biogenesis, role in microbe-microbe and host-microbe interactions and disease, as well as their potential therapeutic applications. A workflow for scalable isolation of EVs from various bacteria is presented to facilitate standardization of EV research.

Scalable Isolation and Purification of Extracellular Vesicles from Escherichia coli and Other Bacteria

The present protocol describes solvent-based protein precipitation under controlled conditions for robust and rapid recovery and purification of proteome samples prior to mass spectrometry.

Organic Solvent-Based Protein Precipitation for Robust Proteome Purification Ahead of Mass Spectrometry

This article describes a methodology for overexpressing recombinant Nsp15, a toxic nuclease, in a C41(DE3) expression system, followed by purification of the tagged protein utilizing affinity and size exclusion chromatography. These protocols can be adapted for other challenging toxic proteins.

Overexpressing and Purifying a Toxic Nuclease from Escherichia coli

Learn a rapid organic solvent-based extraction method to purify elastin-like polypeptides from E. coli while retaining fusion protein activity and controlling endotoxin levels for scalable biomaterial production.

Efficient Purification of Elastin-Like Polypeptides (ELPs) from E. coli Using an Organic Solvent-based Extraction and Precipitation Method (Video) | JoVE Journal

Efficient Purification of Elastin-Like Polypeptides (ELPs) from E. coli Using an Organic Solvent-based Extraction and Precipitation Method

Explore More Videos