Translate this page to:
Choose Language…
In JoVE (1)
Other Publications (11)
- Journal of Colloid and Interface Science
- Chemical Communications (Cambridge, England)
- Journal of Colloid and Interface Science
- Nature Materials
- Proceedings of the National Academy of Sciences of the United States of America
- Advanced Materials (Deerfield Beach, Fla.)
- Advanced Materials (Deerfield Beach, Fla.)
- Chemical Communications (Cambridge, England)
- Advanced Materials (Deerfield Beach, Fla.)
- Nanoscale
- Advanced Materials (Deerfield Beach, Fla.)
Articles by Bok Yeop Ahn in JoVE
JoVE Bioengineering
Planar and Three-Dimensional Printing of Conductive Inks
1Department of Materials Science and Engineering, University of Illinois at Urbana-Champaign, 2Center for Micro- and Nanotechnology, Lawrence Livermore National Laboratory, 3Presently at the Interdisciplinary Center for Wide Band-gap Semiconductors, University Of California Santa Barbara
Planar and three-dimensional printing of conductive metallic inks is described. Our approach provides new avenues for fabricating printed electronic, optoelectronic, and biomedical devices in unusual layouts at the microscale.
Other articles by Bok Yeop Ahn on PubMed
Redispersible Rutile TiO2 Nanocrystals in Organic Media by Surface Chemical Modification with an Inorganic Barium Hydroxide
The present paper describes the synthesis of the redispersible rutile TiO2 nanocrystals in organic media by surface chemical modification reaction in an aqueous barium hydroxide solution. In our facile surface modification reactions, the surfaces of the TiO2 nanocrystals are coated by bimetallic TiOBa spices and saturated with BaOH terminal groups. The inherent characteristics such as morphology, size, crystallinity, and color of the nanocrystals remained almost unchanged after surface-treatment, but their dispersibility in organic media such as methanol and DMF were remarkably enhanced. It is ascribed that BaOH groups in the surface of the TiO2 nanocrystals prevented the formation of covalently bound agglomerates through Ti-O-Ti condensation reaction among the nanocrystals during the purification and water-elimination procedures.
Core/shell Silica-based In-situ Microencapsulation: a Self-templating Method
Core/shell SiO2 and (RSiO1.5)(1-x)-(SiO2)x (R = alkyl) microcapsules were synthesized via a single-step O/W emulsion system using a self-templating method; the facile synthetic process provides an in-situ encapsulation route for a wide range of lipophilic functional compounds.
Wet-chemical Synthesis of Crystalline BaTiO3 from Stable Chelated Titanium Complex: Formation Mechanism and Dispersibility in Organic Solvents
Crystalline barium titanate nanoparticles were synthesized in solution at low temperature (70 degrees C) from acetylacetone chelated titanium complex and barium hydroxide. Very fine crystalline solids were characterized to cubic phase of BaTiO(3) by X-ray diffraction studies of the air-dried samples. It was observed that the crystalline barium titanate was formed in solution at Ba/Ti molar ratio > or =2.5. The dependence of the reaction temperature and the Ba(OH)(2) concentration (in terms of Ba/Ti molar ratio) on formation of crystalline BaTiO(3) in solution-phase was studied, and a plausible mechanism toward the formation of crystalline BaTiO(3) was also proposed. Crystallite sizes of the BaTiO(3) were found to be in the range 33-50 nm, while the average particle sizes, measured by dynamic light scattering method were in the range 70-100 nm. The crystalline BaTiO(3) prepared from acetylacetone chelated titanium complex was highly dispersible in organic medium such as N-methyl-2-pyrillidone (NMP) and N,N-dimethyl formamide (DMF).
Ultrathin Silicon Solar Microcells for Semitransparent, Mechanically Flexible and Microconcentrator Module Designs
The high natural abundance of silicon, together with its excellent reliability and good efficiency in solar cells, suggest its continued use in production of solar energy, on massive scales, for the foreseeable future. Although organics, nanocrystals, nanowires and other new materials hold significant promise, many opportunities continue to exist for research into unconventional means of exploiting silicon in advanced photovoltaic systems. Here, we describe modules that use large-scale arrays of silicon solar microcells created from bulk wafers and integrated in diverse spatial layouts on foreign substrates by transfer printing. The resulting devices can offer useful features, including high degrees of mechanical flexibility, user-definable transparency and ultrathin-form-factor microconcentrator designs. Detailed studies of the processes for creating and manipulating such microcells, together with theoretical and experimental investigations of the electrical, mechanical and optical characteristics of several types of module that incorporate them, illuminate the key aspects.
Two- and Three-dimensional Folding of Thin Film Single-crystalline Silicon for Photovoltaic Power Applications
Fabrication of 3D electronic structures in the micrometer-to-millimeter range is extremely challenging due to the inherently 2D nature of most conventional wafer-based fabrication methods. Self-assembly, and the related method of self-folding of planar patterned membranes, provide a promising means to solve this problem. Here, we investigate self-assembly processes driven by wetting interactions to shape the contour of a functional, nonplanar photovoltaic (PV) device. A mechanics model based on the theory of thin plates is developed to identify the critical conditions for self-folding of different 2D geometrical shapes. This strategy is demonstrated for specifically designed millimeter-scale silicon objects, which are self-assembled into spherical, and other 3D shapes and integrated into fully functional light-trapping PV devices. The resulting 3D devices offer a promising way to efficiently harvest solar energy in thin cells using concentrator microarrays that function without active light tracking systems.
Direct-write Assembly of Microperiodic Planar and Spanning ITO Microelectrodes
Printed Sn-doped In(2)O(3) (ITO) microelectrodes are fabricated by direct-write assembly of sol-gel inks with varying concentration. This maskless, non-lithographic approach provides a facile route to patterning transparent conductive features in planar arrays and spanning architectures.
Transparent Conductive Grids Via Direct Writing of Silver Nanoparticle Inks
Transparent conductive grids are patterned by direct writing of concentrated silver nanoparticle inks. This maskless, etch-free patterning approach is used to produce well-defined, two-dimensional periodic arrays composed of conductive features with center-to-center separation distances of up to 400 µm and an optical transmittance as high as 94.1%.
