Ponding Method
Ponding Method - Related Videos
06:37
Continuous Hydrologic and Water Quality Monitoring of Vernal Ponds
0 Views •
Cited by 1 •
2017
Understanding the ecosystem services and processes provided by vernal ponds and the impacts of anthropogenic activities on their ability to provide these services requires intensive hydrologic monitoring. This sampling protocol using in-situ monitoring equipment was developed to understand the impact of anthropogenic activities on water levels and quality.
07:34
Biogas Purification through the use of a Microalgae-Bacterial System in Semi-Industrial High Rate Algal Ponds
0 Views •
Cited by 1 •
2024
Air pollution impacts the quality of life of all organisms. Here, we describe the use of microalgae biotechnology for the treatment of biogas (simultaneous removal of carbon dioxide and hydrogen sulfide) and the production of biomethane through semi-industrial open high-rate algal ponds and subsequent analysis of treatment efficiency, pH, dissolved oxygen, and microalgae growth.
08:17
Coupling Carbon Capture from a Power Plant with Semi-automated Open Raceway Ponds for Microalgae Cultivation
0 Views •
Cited by 5 •
2020
A protocol is described to utilize the carbon dioxide in natural gas power plant flue gas to cultivate microalgae in open raceway ponds. Flue gas injection is controlled with a pH sensor, and microalgae growth is monitored with real time measurements of optical density.
08:08
Creating a Winogradsky Column: A Method to Enrich the Microbial Species in a Sediment Sample
0 Views •
2023
Source: Elizabeth Suter1, Christopher Corbo1, Jonathan Blaize1 1 Department of Biological Sciences, Wagner College, 1 Campus Road, Staten Island NY, 10301 The Winogradsky column is a miniature, enclosed ecosystem used for enriching sediment microbial communities, especially those involved in sulfur cycling. The column was first used by Sergei Winogradsky in the 1880s and has since been applied in the study of many diverse microorganisms involved in biogeochemistry, such as photosynthesizers,...
01:29
Methods of Sterilization I: Physical Methods
0 Views •
2025
As used in a healthcare facility, sterilization destroys all microorganisms through physical or chemical methods. The physical method includes steam, dry heat, boiling water, and radiation. Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...
FAQs
Maintaining a shallow pond creates a controlled water supply at the test surface while infiltration proceeds. Because the pond is sustained over a defined area, engineers can observe how much water enters the soil over a measured period rather than relying on a single momentary observation. This controlled condition makes the resulting infiltration measurement useful for engineering comparisons and design.
The recorded infiltration rate reflects the soil’s hydraulic conductivity under the conditions established during testing. Hydraulic conductivity describes how readily water moves through a soil or porous surface, so the result provides an engineering indicator of permeability at the tested location. Interpreting the value as condition-specific helps engineers apply it appropriately to drainage, irrigation, or stormwater decisions.
Either the volume needed to sustain the pond or the change in water level over time provides the measurement basis. These observations connect water entering the surface with elapsed time across the defined test area. The resulting rate allows engineers to characterize infiltration behavior and judge how effectively a site may transmit water below the surface.
A typical procedure establishes a defined test area, places a shallow layer of water over the soil or porous surface, and maintains that pond while infiltration occurs. The operator then records the water volume or water-level change required to sustain the pond over time. Those measurements are used to calculate or characterize the site’s infiltration rate.
Engineers use the results when they need site-specific information about how quickly water can enter the ground. The measurements support evaluation of soil permeability, runoff estimates, and stormwater planning. They can also help assess whether an infiltration facility is suitable for the site, linking observed surface behavior with practical drainage and water-management decisions.
Ponding Method data help determine whether site soils can support systems that depend on water entering the ground. Relevant applications include recharge basins, permeable pavements, and septic leach fields. The same information can inform estimates of groundwater recharge and help engineers evaluate whether the tested surface provides adequate infiltration for the intended facility.