Prime Mover Speed Control
Prime Mover Speed Control - Related Videos
06:16
Verbal Priming
0 Views •
2023
Source: Laboratory of Jonathan Flombaum—Johns Hopkins University Human memory seems to work in two broad ways. Like modern computers, the human mind has explicit, or declarative, memory: ask a question, and a person gives the best answer they can. Input a query, and a computer program returns the contents of the relevant parts of its stored memory. Humans also have a second kind of memory system, one not really typical of computers, one that experimental psychologists call implicit. Implicit...
01:30
Stackelberg and First Mover Advantage
0 Views •
2025
The Stackelberg model explains how being the first mover in a market gives a firm a competitive edge. The first-mover advantage is the benefit of increased brand recognition, customer loyalty, and increased sales that often accompany a business who is the very first to enter the marketplace with a new product. The leader firm decides on its production first, anticipating that the follower will adjust its output accordingly. This allows the leader to influence market conditions and secure higher...
08:04
Controlling Flow Speeds of Microtubule-Based 3D Active Fluids Using Temperature
0 Views •
Cited by 4 •
2019
The goal of this protocol is to use temperature to control the flow speeds of three-dimensional active fluids. The advantage of this method not only allows for regulating flow speeds in situ but also enables dynamic control, such as periodically tuning flow speeds up and down.
13:54
Tractable Mammalian Cell Infections with Protozoan-primed Bacteria
0 Views •
Cited by 2 •
2013
This technique provides a method to harvest, normalize and quantify intracellular growth of bacterial pathogens that are pre-cultivated in natural protozoan host cells prior to infections of mammalian cells. This method can be modified to accommodate a wide variety of host cells for the priming stage as well as target cell types.
04:00
A Murine Model of Primed Mycobacterial Uveitis to Study Post-Infectious Uveitis
0 Views •
2025
This video demonstrates a method to generate a mouse model of primed mycobacterial uveitis (PMU) for studying post-infectious uveitis. Upon induction of PMU by intravitreal injection of heat-killed Mycobacterium tuberculosis in a mouse previously immunized with the same immunogen, the progression of chronic inflammation in the eye is analyzed using imaging and histopathological...
FAQs
The control system continuously uses shaft speed as feedback, compares the measured value with a desired setpoint, and changes the energy input when the two differ. A rising load tends to disturb rotational speed, so the controller adjusts fuel, steam, or water flow to oppose that disturbance. This corrective action helps the machine return toward stable operation.
The setpoint provides the reference against which actual shaft speed is evaluated. Without that reference, the governor or electronic controller cannot determine whether energy input should be increased or reduced. Maintaining the selected speed is especially important for generators, where rotational speed is tied to electrical frequency, and for other machines that must operate reliably under changing conditions.
Both governors and electronic control systems perform the essential feedback task of comparing shaft speed with a setpoint and adjusting energy input. The source distinguishes them as alternative control-system forms rather than assigning separate operating goals. Their shared purpose is to counter load-related speed changes, support stable operation, and limit unsafe overspeed in engines, turbines, and related machinery.
A practical control sequence begins by sensing rotational speed, comparing it with the selected setpoint, and determining whether the energy input must change. The system then adjusts the relevant input, such as fuel, steam, or water flow, and evaluates the resulting speed. This feedback process continues during startup, shutdown, and changing operating conditions to maintain controlled behavior.
The approach is used wherever an engine or turbine must deliver mechanical motion reliably despite changes in demand. Engineering examples include electrical generators, pumps, compressors, and vehicle power systems. In generator applications, speed regulation helps maintain electrical frequency; in other systems, it supports consistent operation while the driven equipment experiences varying loads.
Appropriate regulation can improve efficiency by matching energy input more closely to operating demand while preserving the target speed. It also limits overspeed, which is important for protecting rotating machinery, and reduces mechanical stress during startup, shutdown, and load changes. These outcomes make controlled speed valuable for reliable operation across several prime mover applications.