fully-automated-centrifugal-microfluidic-device-for-ultrasensitive

Fully Automated Centrifugal Microfluidic Device for Ultrasensitive Protein Detection from Whole Blood

Enzyme-linked immunosorbent assay (ELISA) is a promising method to detect small amount of proteins in biological samples. The devices providing a platform ...

School of Life Sciences, Ulsan National Institute of Science and Technology (UNIST), UNIST-gil 50, Ulsan, Republic of Korea

KOGAS (Korea Gas Corporation) Research Institute

ELISA-based devices are promising tools for the detection of low abundant proteins in biological samples. Reductions of the sample volume and assay time as well as full automation are required for their potential use in point-of-care diagnostic applications. Here, we present a highly efficient lab-on-a-disc composed of a TiO2 nanofibrous mat for sensitive detection of serum proteins with a broad dynamic range, with only 10 μL of whole blood within 30 min. The TiO2 nanofibers provide high specific surface area as well as active functional groups to capture large amounts of antibodies on the surface. In addition, the device offers efficient mixing and washing for improving the signal-to-noise ratio, thus enhancing the overall detection sensitivity. We employ the device for the detection of cardiac biomarkers, C-reactive protein (CRP) and cardiac troponin I (cTnI), spiked in phosphate-buffered saline (PBS) as well as in serum or whole blood. The device exhibited a wide dynamic range of six orders of magnitude from 1 pg mL(-1) (~8 fM) to 100 ng mL(-1) (~0.8 pM) and a low detection limit of 0.8 pg mL(-1) (~6 fM) for CRP spiked in CRP-free serum and a dynamic range of 10 pg mL(-1) (~0.4 pM) to 100 ng mL(-1) (~4 nM) with a detection limit of 37 pg mL(-1) (~1.5 pM) for cTnI spiked in whole blood.

Electrospun TiO2 nanofiber integrated lab-on-a-disc for ultrasensitive protein detection from whole blood.

Flow monitoring in porous materials is critical for the engineering of paper-based microfluidic bioassays. Here, we present an electrochemical-sensor system that monitors the liquid flow in porous materials without affecting the real flow in paper-strip samples. The developed microfluidic sensor records an amperometric signal created by the solution movement mediated by paper wicking. This approach allows the in situ monitoring of the different hydrodynamic conditions of a specific paper geometry or composition. In addition, the method proposed in this work was employed to characterise the fluid flow of different nitrocellulose paper strips after oxygen-plasma treatment or dextran coating. The dextran fluid-flow modifiers were further used on the paper strip-based assays as means of signal enhancement. The proposed electrochemical-sensing method offers a valuable alternative to existing optical-based monitoring techniques for flow measurement in paper-based microfluidic systems.

Article	Year
Electrospun TiO2 nanofiber integrated lab-on-a-disc for ultrasensitive protein detection from whole blood. Lab on a chip\| PubMed ID: 25407164	2015
An electrochemical-sensor system for real-time flow measurements in porous materials. Biosensors & bioelectronics\| PubMed ID: 25797850	2015

Ja-Ryoung Han

Biography

JoVE Journal Publications

Other Publications