scalable-solution-processed-fabrication-strategy-for-high-performance

Scalable Solution-processed Fabrication Strategy for High-performance, Flexible, Transparent Electrodes with Embedded Metal Mesh

Here, the authors report the embedded metal-mesh transparent electrode (EMTE), a new transparent electrode (TE) with a metal mesh completely embedded in a ...

University of Hong Kong

A new structure of flexible transparent electrodes is reported, featuring a metal mesh fully embedded and mechanically anchored in a flexible substrate, and a cost-effective solution-based fabrication strategy for this new transparent electrode. The embedded nature of the metal-mesh electrodes provides a series of advantages, including surface smoothness that is crucial for device fabrication, mechanical stability under high bending stress, strong adhesion to the substrate with excellent flexibility, and favorable resistance against moisture, oxygen, and chemicals. The novel fabrication process replaces vacuum-based metal deposition with an electrodeposition process and is potentially suitable for high-throughput, large-volume, and low-cost production. In particular, this strategy enables fabrication of a high-aspect-ratio (thickness to linewidth) metal mesh, substantially improving conductivity without considerably sacrificing transparency. Various prototype flexible transparent electrodes are demonstrated with transmittance higher than 90% and sheet resistance below 1 ohm sq(-1) , as well as extremely high figures of merit up to 1.5 × 10(4) , which are among the highest reported values in recent studies. Finally using our embedded metal-mesh electrode, a flexible transparent thin-film heater is demonstrated with a low power density requirement, rapid response time, and a low operating voltage.

High-Performance Flexible Transparent Electrode with an Embedded Metal Mesh Fabricated by Cost-Effective Solution Process.

Failure of bone fracture healing occurs in 5% to 10% of all patients. Nonunion risk is associated with the severity of injury and with the surgical treatment technique, yet progression to nonunion is not fully explained by these risk factors.

Epidemiology of Fracture Nonunion in 18 Human Bones.

Phototaxis is commonly observed in motile photosynthetic microorganisms. For example, green algae are capable of swimming towards a light source (positive phototaxis) to receive more energy for photosynthesis, or away from a light source (negative phototaxis) to avoid radiation damage or to hide from predators. Recently, with the aim of applying nanoscale machinery to biomedical applications, various inorganic nanomotors based on different propulsion mechanisms have been demonstrated. The only method to control the direction of motion of these self-propelled micro/nanomotors is to incorporate a ferromagnetic material into their structure and use an external magnetic field for steering. Here, we show an artificial microswimmer that can sense and orient to the illumination direction of an external light source. Our microswimmer is a Janus nanotree containing a nanostructured photocathode and photoanode at opposite ends that release cations and anions, respectively, propelling the microswimmer by self-electrophoresis. Using chemical modifications, we can control the zeta potential of the photoanode and program the microswimmer to exhibit either positive or negative phototaxis. Finally, we show that a school of microswimmers mimics the collective phototactic behaviour of green algae in solution.

Programmable artificial phototactic microswimmer.

Applications of graphitic carbon nitride (g-CN) in photoelectrochemical and optoelectronic devices are still hindered due to the difficulties in synthesis of g-CN films with tunable chemical, physical and catalytic properties. Herein we present a general method to alter the electronic and photoelectrochemical properties of g-CN films by annealing. We found that N atoms can be removed from the g-CN networks after annealing treatment. Assisted by theoretical calculations, we confirm that upon appropriate N removal, the adjacent C atoms will form new C=C π bonds. Detailed calculations demonstrate that the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) are located at the structure unit with C=C π bonds and the electrons are more delocalized. Valence band X-ray photoelectron spectroscopy spectra together with optical absorption spectra unveil that the structure changes result in the alteration of the g-CN energy levels and position of band edges. Our results show that the photocurrent density of the annealed g-CN film is doubled compared with the pristine one, thanks to the better charge separation and transport within the film induced by the new C=C π bonds. An ultrathin TiO2 film (2.2 nm) is further deposited on the g-CN film as stabilizer and the photocurrent density is kept at 0.05 mA cm(-2) at 1.23 V versus reversible hydrogen electrode after two-cycle stability assessment. This work enables the applications of g-CN films in many electronic and optoelectronic devices.

C=C π Bond Modified Graphitic Carbon Nitride Films for Enhanced Photoelectrochemical Cell Performance.

The epidemiology of fracture nonunion has been characterized so it is potentially possible to predict nonunion using patient-related risk factors. However, prediction models are currently too cumbersome to be useful. We test a hypothesis that nonunion can be predicted with ≤10 variables, retaining the predictive accuracy of a full model with 42 variables.

An inception cohort analysis to predict nonunion in tibia and 17 other fracture locations.

Over the last decades, scientists have endeavored to develop nanoscopic machines and envisioned that these tiny machines could be exploited in biomedical applications and novel material fabrication. Here, a visible-/near-infrared light-driven nanomotor based on a single silicon nanowire is reported. The silicon nanomotor harvests energy from light and propels itself by the self-electrophoresis mechanism. Due to the high efficiency, the silicon nanowire can be readily driven by visible and near-infrared illumination at ultralow light intensity (≈3 mW cm(-2) ). The experimental study and numerical simulation also show that the detailed structure around the concentrated reaction center determines the migration behavior of the nanomotor. Importantly, due to the optical resonance inside the silicon nanowire, the spectral response of the nanowire-based nanomotor can be readily modulated by the nanowire's diameter. Compared to other methods, light controlling potentially offers more freedom and flexibility, as light can be modulated not only with its intensity and direction, but also with the frequency and polarities. This nanowire motor demonstrates a step forward to harness the advantages of light, which opens up new opportunities for the realization of many novel functions such as multiple channels communication to nanorobots and controllable self-assembly.

Article	Year
High-Performance Flexible Transparent Electrode with an Embedded Metal Mesh Fabricated by Cost-Effective Solution Process. Small (Weinheim an der Bergstrasse, Germany)\| PubMed ID: 27027390	2016
Epidemiology of Fracture Nonunion in 18 Human Bones. JAMA surgery\| PubMed ID: 27603155	2016
Programmable artificial phototactic microswimmer. Nature nanotechnology\| PubMed ID: 27749832	2016
C=C π Bond Modified Graphitic Carbon Nitride Films for Enhanced Photoelectrochemical Cell Performance. Chemistry, an Asian journal\| PubMed ID: 28272782	2017
An inception cohort analysis to predict nonunion in tibia and 17 other fracture locations. Injury\| PubMed ID: 28377261	2017
A Silicon Nanowire as a Spectrally Tunable Light-Driven Nanomotor. Advanced materials (Deerfield Beach, Fla.)\| PubMed ID: 28599059	2017

Ze Xiong

Biography

JoVE Journal Publications

Other Publications