single-molecule-manipulation-of-g-quadruplexes-by-magnetic-tweezers

Single-molecule Manipulation of G-quadruplexes by Magnetic Tweezers

Non-canonical nucleic acid secondary structure G-quadruplexes (G4) are involved in diverse cellular processes, such as DNA replication, transcription, RNA ...

National University of Singapore

In Escherichia coli, the filament of RecA formed on single-stranded DNA (ssDNA) is essential for recombinational DNA repair. Although ssDNA-binding protein (SSB) plays a complicated role in RecA reactions in vivo, much of our understanding of the mechanism is based on RecA binding directly to ssDNA. Here we investigate the role of SSB in the regulation of RecA polymerization on ssDNA, based on the differential force responses of a single 576-nucleotide-long ssDNA associated with RecA and SSB. We find that SSB outcompetes higher concentrations of RecA, resulting in inhibition of RecA nucleation. In addition, we find that pre-formed RecA filaments de-polymerize at low force in an ATP hydrolysis- and SSB-dependent manner. At higher forces, re-polymerization takes place, which displaces SSB from ssDNA. These findings provide a physical picture of the competition between RecA and SSB under tension on the scale of the entire nucleoprotein SSB array, which have broad biological implications particularly with regard to competitive molecular binding.

Force and ATP hydrolysis dependent regulation of RecA nucleoprotein filament by single-stranded DNA binding protein.

Double-stranded DNA (dsDNA) unconstrained by torsion undergoes an overstretching transition at about 65 pN, elongating the DNA to about 1.7-fold. Three possible structural transitions have been debated for the nature of DNA overstretching: (i) "peeling" apart of dsDNA to produce a peeled ssDNA strand under tension while the other strand coils, (ii) "inside-strand separation" of dsDNA to two parallel ssDNA strands that share tension (melting bubbles), and (iii) "B-to-S" transition to a novel dsDNA, termed S-DNA. Here we overstretched an end-opened DNA (with one open end to allow peeling) and an end-closed (i.e., both ends of the linear DNA are covalently closed to prohibit peeling) and torsion-unconstrained DNA. We report that all three structural transitions exist depending on experimental conditions. For the end-opened DNA, the peeling transition and the B-to-S transition were observed; for the end-closed DNA, the inside-strand separation and the B-to-S transition were observed. The peeling transition and the inside-strand separation are hysteretic and have an entropy change of approximately 17 cal/(K⋅mol), whereas the B-to-S transition is nonhysteretic and has an entropy change of approximately -2 cal/(K⋅mol). The force-extension curves of peeled ssDNA, melting bubbles, and S-DNA were characterized by experiments. Our results provide experimental evidence for the formation of DNA melting bubbles driven by high tension and prove the existence of nonmelted S-DNA. Our findings afford a full understanding of three possible force-driven structural transitions of torsion-unconstrained DNA and the resulting three overstretched DNA structures.

Revealing the competition between peeled ssDNA, melting bubbles, and S-DNA during DNA overstretching by single-molecule calorimetry.

The RecA filament formed on double-stranded (ds) DNA is proposed to be a functional state analogous to that generated during the process of DNA strand exchange. RecA polymerization and de-polymerization on dsDNA is governed by multiple physiological factors. However, a comprehensive understanding of how these factors regulate the processes of polymerization and de-polymerization of RecA filament on dsDNA is still evolving. Here, we investigate the effects of temperature, pH, tensile force, and DNA ends (in particular ssDNA overhang) on the polymerization and de-polymerization dynamics of the E. coli RecA filament at a single-molecule level. Our results identified the optimal conditions that permitted spontaneous RecA nucleation and polymerization, as well as conditions that could maintain the stability of a preformed RecA filament. Further examination at a nano-meter spatial resolution, by stretching short DNA constructs, revealed a striking dynamic RecA polymerization and de-polymerization induced saw-tooth pattern in DNA extension fluctuation. In addition, we show that RecA does not polymerize on S-DNA, a recently identified novel base-paired elongated DNA structure that was previously proposed to be a possible binding substrate for RecA. Overall, our studies have helped to resolve several previous single-molecule studies that reported contradictory and inconsistent results on RecA nucleation, polymerization and stability. Furthermore, our findings also provide insights into the regulatory mechanisms of RecA filament formation and stability in vivo.

Dynamics and Regulation of RecA Polymerization and De-Polymerization on Double-Stranded DNA.

Many crucial biological processes are regulated by mechanical stimuli. Here, we report new findings that pico-Newton forces can drastically affect the stability of the site-specific DNA binding of a single transcription factor, the E. coli integration host factor (IHF), by stretching a short ~150 nm DNA containing a single IHF binding site. Dynamic binding and unbinding of single IHF were recorded and analyzed for the force-dependent stability of the IHF-DNA complex. Our results demonstrate that the IHF-DNA interaction is fine tuned by force in different salt concentration and temperature over physiological ranges, indicating that, besides other physiological factors, force may play equally important role in transcription regulation. These findings have broad implications with regard to general mechanosensitivity of site-specific DNA bending proteins.

Mechanosensing of DNA bending in a single specific protein-DNA complex.

Efficient bacterial recombinational DNA repair involves rapid cycles of RecA filament assembly and disassembly. The RecX protein plays a crucial inhibitory role in RecA filament formation and stability. As the broken ends of DNA are tethered during homologous search, RecA filaments assembled at the ends are likely subject to force. In this work, we investigated the interplay between RecX and force on RecA filament formation and stability. Using magnetic tweezers, at single molecular level, we found that Mycobacterium tuberculosis (Mt) RecX could catalyze stepwise de-polymerization of preformed MtRecA filament in the presence of ATP hydrolysis at low forces (<7 pN). However, applying larger forces antagonized the inhibitory effects of MtRecX, and a partially de-polymerized MtRecA filament could re-polymerize in the presence of MtRecX, which cannot be explained by previous models. Theoretical analysis of force-dependent conformational free energies of naked ssDNA and RecA nucleoprotein filament suggests that mechanical force stabilizes RecA filament, which provides a possible mechanism for the observation. As the antagonizing effect of force on the inhibitory function of RecX takes place in a physiological range; these findings broadly suggest a potential mechanosensitive regulation during homologous recombination.

Mechanical force antagonizes the inhibitory effects of RecX on RecA filament formation in Mycobacterium tuberculosis.

Replication protein A (RPA) is a ubiquitous eukaryotic single-stranded DNA (ssDNA) binding protein that serves to protect ssDNA from degradation and annealing, and as a template for recruitment of many downstream factors in virtually all DNA transactions in cell. During many of these transactions, DNA is tethered and is likely subject to force. Previous studies of RPA's binding behavior on ssDNA were conducted in the absence of force; therefore the RPA-ssDNA conformations regulated by force remain unclear. Here, using a combination of atomic force microscopy imaging and mechanical manipulation of single ssDNA tethers, we show that force mediates a switch of the RPA bound ssDNA from amorphous aggregation to a much more regular extended conformation. Further, we found an interesting non-monotonic dependence of the binding affinity on monovalent salt concentration in the presence of force. In addition, we discovered that zinc in micromolar concentrations drives ssDNA to a unique, highly stiff and more compact state. These results provide new mechanochemical insights into the influences and the mechanisms of action of RPA on large single ssDNA.

Mechanochemical regulations of RPA's binding to ssDNA.

Single-molecule manipulation technologies have been extensively applied to studies of the structures and interactions of DNA and proteins. An important aspect of such studies is to obtain the dynamics of interactions; however the initial binding is often difficult to obtain due to large mechanical perturbation during solution introduction. Here, we report a simple disturbance-free rapid solution exchange method for magnetic tweezers single-molecule manipulation experiments, which is achieved by tethering the molecules inside microwells (typical dimensions-diameter (D): 40-50 μm, height (H): 100 μm; H:D∼2:1). Our simulations and experiments show that the flow speed can be reduced by several orders of magnitude near the bottom of the microwells from that in the flow chamber, effectively eliminating the flow disturbance to molecules tethered in the microwells. We demonstrate a wide scope of applications of this method by measuring the force dependent DNA structural transitions in response to solution condition change, and polymerization dynamics of RecA on ssDNA/SSB-coated ssDNA/dsDNA of various tether lengths under constant forces, as well as the dynamics of vinculin binding to α-catenin at a constant force (< 5 pN) applied to the α-catenin protein.

Disturbance-free rapid solution exchange for magnetic tweezers single-molecule studies.

Mechanosensing of the micro-environments has been shown to be essential for cell survival, growth, differentiation and migration. The mechanosensing pathways are mediated by a set of mechanosensitive proteins located at focal adhesion and cell-cell adherens junctions as well as in the cytoskeleton network. Here we review the applications of magnetic tweezers on elucidating the molecular mechanisms of the mechanosensing proteins. The scope of this review includes the principles of the magnetic tweezers technology, theoretical analysis of force-dependent stability and interaction of mechanosensing proteins, and recent findings obtained using magnetic tweezers.

Uncovering mechanosensing mechanisms at the single protein level using magnetic tweezers.

The giant protein titin plays a critical role in regulating the passive elasticity of muscles, mainly through the stochastic unfolding and refolding of its numerous immunoglobulin domains in the I-band of sarcomeres. The unfolding dynamics of titin immunoglobulin domains at a force range greater than 100 pN has been studied by atomic force microscopy, while that at smaller physiological forces has not been measured before. By using magnetic tweezers, it is found that the titin I27 domain unfolds in a surprising non-monotonic force-dependent manner at forces smaller than 100 pN, with the slowest unfolding rate occurring around 22 pN. We further demonstrate that a model with single unfolding pathway taking into account the elasticity of the transition state can reproduce the experimental results. These results provide important novel insights into the regulation mechanism of the passive elasticity of muscle tissues.

Article	Year
Force and ATP hydrolysis dependent regulation of RecA nucleoprotein filament by single-stranded DNA binding protein. Nucleic acids research\| PubMed ID: 23221642	2013
Revealing the competition between peeled ssDNA, melting bubbles, and S-DNA during DNA overstretching by single-molecule calorimetry. Proceedings of the National Academy of Sciences of the United States of America\| PubMed ID: 23431154	2013
Dynamics and Regulation of RecA Polymerization and De-Polymerization on Double-Stranded DNA. PloS one\| PubMed ID: 23825559	2013
Mechanosensing of DNA bending in a single specific protein-DNA complex. Scientific reports\| PubMed ID: 24336435	2013
Mechanical force antagonizes the inhibitory effects of RecX on RecA filament formation in Mycobacterium tuberculosis. Nucleic acids research\| PubMed ID: 25294832	2014
Mechanochemical regulations of RPA's binding to ssDNA. Scientific reports\| PubMed ID: 25787788	2015
Disturbance-free rapid solution exchange for magnetic tweezers single-molecule studies. Nucleic acids research\| PubMed ID: 26007651	2015
Uncovering mechanosensing mechanisms at the single protein level using magnetic tweezers. Methods (San Diego, Calif.)\| PubMed ID: 26318089	2016
Elasticity of the Transition State Leading to an Unexpected Mechanical Stabilization of Titin Immunoglobulin Domains. Angewandte Chemie (International ed. in English)\| PubMed ID: 28394039	2017

Shimin Le

Biography

JoVE Journal Publications

Other Publications