preparation-graphene-liquid-cells-for-observation-lithium-ion-battery

Preparation of Graphene Liquid Cells for the Observation of Lithium-ion Battery Material

In this work, we introduce the preparation of graphene liquid cells (GLCs), encapsulating both electrode materials and organic liquid electrolytes between ...

Korea Advanced Institute of Science and Technology

Resistive random access memory (ReRAM) is a promising candidate for future nonvolatile memories. Resistive switching in a metal-insulator-metal structure is generally assumed to be caused by the formation/rupture of nanoscale conductive filaments (CFs) under an applied electric field. The critical issue of ReRAM for practical memory applications, however, is insufficient repeatability of the operating voltage and resistance ratio. Here, we present an innovative approach to reliably and reproducibly control the CF growth in unipolar NiO resistive memory by exploiting uniform formation of insulating SiOx nanostructures from the self-assembly of a Si-containing block copolymer. In this way, the standard deviation (SD) of set and reset voltages was markedly reduced by 76.9% and 59.4%, respectively. The SD of high resistance state also decreased significantly, from 6.3 × 10(7) Ω to 5.4 × 10(4) Ω. Moreover, we report direct observations of localized metallic Ni CF formation and their controllable growth using electron microscopy and discuss electrothermal simulation results based on the finite element method supporting our analysis results. 

Reliable control of filament formation in resistive memories by self-assembled nanoinsulators derived from a block copolymer.

The ambient-temperature rechargeable lithium/sulfur (Li/S) cell is a strong candidate for the beyond lithium ion cell since significant progress on developing advanced sulfur electrodes with high sulfur loading has been made. Here we report on a new sulfur electrode active material consisting of a cetyltrimethylammonium bromide-modified sulfur-graphene oxide-carbon nanotube (S-GO-CTA-CNT) nanocomposite prepared by freeze-drying. We show the real-time formation of nanocrystalline lithium sulfide (LiS) at the interface between the S-GO-CTA-CNT nanocomposite and the liquid electrolyte by in situ TEM observation of the reaction. The combination of GO and CNT helps to maintain the structural integrity of the S-GO-CTA-CNT nanocomposite during lithiation/delithiation. A high S loading (11.1 mgS/cm, 75% S) S-GO-CTA-CNT electrode was successfully prepared using a three-dimensional structured Al foam as a substrate and showed good S utilization (1128 mAh/g S corresponding to 12.5 mAh/cm), even with a very low electrolyte to sulfur weight ratio of 4. Moreover, it was demonstrated that the ionic liquid in the electrolyte improves the Coulombic efficiency and stabilizes the morphology of the Li metal anode.

Freeze-Dried Sulfur-Graphene Oxide-Carbon Nanotube Nanocomposite for High Sulfur-Loading Lithium/Sulfur Cells.

Sodium ion batteries have been considered a promising alternative to lithium ion batteries for large-scale energy storage owing to their low cost and high natural abundance. However, the commercialization of this device is hindered by the lack of suitable anodes with an optimized morphology that ensure high capacity and cycling stability of a battery. Here, we not only demonstrate that copper sulfide nanoplates exhibit close-to-theoretical capacity (~560 mAh g) and long-term cyclability, but also reveal that their sodiation follows a non-equilibrium reaction route, which involves successive crystallographic tuning. By employing in situ transmission electron microscopy, we examine the atomic structures of four distinct sodiation phases of copper sulfide nanoplates including a metastable phase and discover that the discharge profile of copper sulfide directly reflects the observed phase evolutions. Our work provides detailed insight into the sodiation process of the high-performance intercalation-conversion anode material.

Article	Year
Reliable control of filament formation in resistive memories by self-assembled nanoinsulators derived from a block copolymer. ACS nano\| PubMed ID: 25192434	2014
Freeze-Dried Sulfur-Graphene Oxide-Carbon Nanotube Nanocomposite for High Sulfur-Loading Lithium/Sulfur Cells. Nano letters\| PubMed ID: 29035057	2017
Atomic visualization of a non-equilibrium sodiation pathway in copper sulfide. Nature communications\| PubMed ID: 29500359	2018

Hyeon Kook Seo

Biography

JoVE Journal Publications

Other Publications