live-cell-analysis-shear-stress-on-pseudomonas-aeruginosa-using-an

Live Cell Analysis of Shear Stress on <em>Pseudomonas aeruginosa</em> Using an Automated Higher-Throughput Microfluidic System

A higher-throughput microfluidic in vitro bioreactor coupled with fluorescence microscopy has been used to study bacterial biofilm growth and morphology, ...

Doane University

Solid supported colorimetric sensing arrays have the advantage of portability and ease of use when deployed in the field, such as crime scenes, disaster zones, or in war zones, but many sensor arrays require complex fabrication methods. Here, we report a practical method for the fabrication of 4 × 4 colorimetric sensor arrays, which are printed on nylon membranes, using a commercially available inkjet printer. In order to test the efficacy of the printed arrays, they were exposed to 43 analytes at concentrations ranging from 0.001 to 3.0 M for a total of 559 samples of inorganic and organic acids or bases including hydrochloric, acetic, phthalic, malonic, picric, and trifluoroacetic acid, ammonium hydroxide, sodium hydroxide, lysine, and water as the control. Colorimetric data from the imaged arrays was analyzed with linear discriminant analysis and k-nearest neighbors to determine the analyte and concentration with ∼88-90% accuracy. Overall, the arrays have impressive analytical power to identify a variety of analytes at different concentrations while being simple to fabricate.

Printed Colorimetric Arrays for the Identification and Quantification of Acids and Bases.

Biofilms are microbial communities attached to a surface and embedded in an extracellular polymeric substance which provides for the protection, stability and nutrients of the various bacterial species indwelling. These communities can build up in a variety of different environments from industrial equipment to medical devices resulting in damage, loss of productivity and disease. They also have great potential for economic and societal benefits as bioremediation agents and renewable energy sources. The great potential benefits and threats of biofilms has encouraged researchers across disciplines to study biofilm characteristics and antibiofilm strategies resulting in chemists, physicists, material scientists, and engineers, to develop beneficial biofilm applications and prevention methods. The ultimate outcome is a wealth of knowledge and innovative technology. However, without extensive formal training in microbes and biofilm research, these scientists find a daunting array of established techniques for growing, quantifying and characterizing biofilms while trying to design experiments and develop innovative laboratory protocols. This mini-review focuses on enriching interdisciplinary efforts and understanding by overviewing a variety of quantitative and qualitative biofilm characterization methods to assist the novice researcher in assay selection. This review consists of four parts. Part 1 is a brief overview of biofilms and the unique properties that demand a highly interdisciplinary approach. Part 2 describes the classical quantification techniques including colony forming unit (CFU) counting and crystal violet staining, but also introduces some modern methods including ATP bioluminescence and quartz crystal microbalance. Part 3 focuses on the characterization of biofilm morphology and chemistry including scanning electron microscopy and spectroscopic methods. Finally, Part 4 illustrates the use of software, including ImageJ and predictive modeling platforms, for biofilm analysis. Each section highlights the most common methods, including literature references, to help novice biofilm researchers make choices which commensurate with their study goals, budget and available equipment.

Quantitative and Qualitative Assessment Methods for Biofilm Growth: A Mini-review.

Chemical warfare agents pose significant threats in the 21st century, especially for armed forces. A colorimetric detection array was developed to identify warfare mimics, including mustard gas and nerve agents. In total, 188 sensors were screened to determine the best sensor performance, in order to identify warfare mimics 2-chloro ethyl ethylsulfide, 2-2'-thiodiethanol, trifluoroacetic acid, methylphosphonic acid, dimethylphosphite, diethylcyanophosphonate, and diethyl (methylthiomethyl)phosphonate. The highest loadings in the principle component analysis (PCA) plots were used to identify the sensors that were most effective in analyzing the RGB data to classify the warfare mimics. The dataset was reduced to only twelve sensors, and PCA results gave comparable results as the large data did, demonstrating that only twelve sensors are needed to classify the warfare mimics.

Article	Year
Printed Colorimetric Arrays for the Identification and Quantification of Acids and Bases. Analytical chemistry\| PubMed ID: 30027740	2018
Quantitative and Qualitative Assessment Methods for Biofilm Growth: A Mini-review. Research & reviews. Journal of engineering and technology\| PubMed ID: 30214915	2017
The Identification of Seven Chemical Warfare Mimics Using a Colorimetric Array. Sensors (Basel, Switzerland)\| PubMed ID: 30563195	2018

Andrea E. Holmes

Biography

JoVE Journal Publications

Other Publications