luminescence-lifetime-imaging-o2-with-frequency-domain-based-camera

Luminescence Lifetime Imaging of O<sub>2</sub> with a Frequency-Domain-Based Camera System

We describe a method to image dissolved oxygen (O2), in 2D at high spatial (&#60; 50-100 &#181;m) and temporal (&#60; 10 s) resolution. The method employs ...

PCO AG

Widefield frequency-domain fluorescence lifetime imaging microscopy (FD-FLIM) is a fast and accurate method to measure the fluorescence lifetime of entire images. However, the complexity and high costs involved in construction of such a system limit the extensive use of this technique. PCO AG recently released the first luminescence lifetime imaging camera based on a high frequency modulated CMOS image sensor, QMFLIM2. Here we tested and provide operational procedures to calibrate the camera and to improve the accuracy using corrections necessary for image analysis. With its flexible input/output options, we are able to use a modulated laser diode or a 20 MHz pulsed white supercontinuum laser as the light source. The output of the camera consists of a stack of modulated images that can be analyzed by the SimFCS software using the phasor approach. The nonuniform system response across the image sensor must be calibrated at the pixel level. This pixel calibration is crucial and needed for every camera settings, e.g. modulation frequency and exposure time. A significant dependency of the modulation signal on the intensity was also observed and hence an additional calibration is needed for each pixel depending on the pixel intensity level. These corrections are important not only for the fundamental frequency, but also for the higher harmonics when using the pulsed supercontinuum laser. With these post data acquisition corrections, the PCO CMOS-FLIM camera can be used for various biomedical applications requiring a large frame and high speed acquisition.

Modulated CMOS camera for fluorescence lifetime microscopy.

Novel fluorescent diazaoxatriangulenium (DAOTA) pH indicators for lifetime-based self-referenced pH sensing are reported. The DAOTA dyes were decorated with phenolic-receptor groups inducing fluorescence quenching via a photoinduced-electron-transfer mechanism. Electron-withdrawing chlorine substituents ensure response in the most relevant pH range (apparent p K values of ∼5 and 7.5 for the p, p-dichlorophenol- and p-chlorophenol-substituted dyes, respectively). The dyes feature long fluorescence lifetimes (17-20 ns), high quantum yields (∼60%), and high photostabilities. Planar optodes are prepared upon immobilization of the dyes into polyurethane hydrogel D4. Apart from the response in the fluorescence intensity, the optodes show pH-dependent lifetime behavior, which makes them suitable for studying 2D pH distributions with the help of fluorescence-lifetime-imaging techniques. The lifetime response is particularly pronounced for the sensors with high dye concentrations (0.5-1 wt % with respect to the polymer) and is attributed to the efficient homo-FRET mechanism.

Article	Year
Modulated CMOS camera for fluorescence lifetime microscopy. Microscopy research and technique\| PubMed ID: 26500051	2015
Background-Free Fluorescence-Decay-Time Sensing and Imaging of pH with Highly Photostable Diazaoxotriangulenium Dyes. Analytical chemistry\| PubMed ID: 30518209	2019

Gerhard Holst

Biography

JoVE Journal Publications

Other Publications