the-automated-crystallography-pipelines-at-embl-htx-facility

The Automated Crystallography Pipelines at the EMBL HTX Facility in Grenoble

EMBL Grenoble operates the High Throughput Crystallization Laboratory (HTX Lab), a large-scale user facility offering high throughput crystallography ...

European Molecular Biology Laboratory

ALPX s.a.s.

The identification of crystallization conditions for biological molecules largely relies on a trial-and-error process in which a number of parameters are explored in large screening experiments. Currently, construct design and sample formulation are recognized as critical variables in this process and often a number of protein variants are assayed for crystallization either sequentially or in parallel, which adds complexity to the screening process. Significant effort is dedicated to sample characterization and quality-control experiments in order to identify at an early stage and prioritize those samples which would be more likely to crystallize. However, large-scale studies relating crystallization success to sample properties are generally lacking. In this study, the thermal stability of 657 samples was estimated using a simplified Thermofluor assay. These samples were also subjected to automated vapour-diffusion crystallization screening under a constant protocol. Analysis of the data shows that samples with an apparent melting temperature (T(m)) of 318 K or higher crystallized in 49% of cases, while the crystallization success rate decreased rapidly for samples with lower T(m). Only 23% of samples with a T(m) below 316 K produced crystals. Based on this analysis, a simple method for estimation of the crystallization likelihood of biological samples is proposed. This method is easy, rapid and consumes very small amounts of sample. The results of this assay can be used to determine optimal incubation temperatures for crystallization experiments or to prioritize certain constructs. More generally, this work provides an objective test that can contribute to making decisions in both focused and structural genomics crystallography projects.

A thermal stability assay can help to estimate the crystallization likelihood of biological samples.

Currently, macromolecular crystallography projects often require the use of highly automated facilities for crystallization and X-ray data collection. However, crystal harvesting and processing largely depend on manual operations. Here, a series of new methods are presented based on the use of a low X-ray-background film as a crystallization support and a photoablation laser that enable the automation of major operations required for the preparation of crystals for X-ray diffraction experiments. In this approach, the controlled removal of the mother liquor before crystal mounting simplifies the cryocooling process, in many cases eliminating the use of cryoprotectant agents, while crystal-soaking experiments are performed through diffusion, precluding the need for repeated sample-recovery and transfer operations. Moreover, the high-precision laser enables new mounting strategies that are not accessible through other methods. This approach bridges an important gap in automation and can contribute to expanding the capabilities of modern macromolecular crystallography facilities. 

Article	Year
A thermal stability assay can help to estimate the crystallization likelihood of biological samples. Acta crystallographica. Section D, Biological crystallography\| PubMed ID: 22101817	2011
Automated harvesting and processing of protein crystals through laser photoablation. Acta crystallographica. Section D, Structural biology\| PubMed ID: 27050125	2016

Gael Seroul

Biography

JoVE Journal Publications

Other Publications