isolation-and-identification-of-limbal-niche-cells

Isolation and Identification of Limbal Niche Cells

Here we report a standard procedure for the isolation and identification of limbal niche cells (LNCs). Limbus tissue obtained from an eye bank was used ...

Huazhong University of Science and Technology

Constrained by the existing scaffold inability to mimic limbal niche, limbal bio-engineered tissue constructed in vitro is challenging to be widely used in clinical practice. Here, a 3D nanofiber-aerogel scaffold is fabricated by employing thermal cross-linking electrospinned film polycaprolactone (PCL) and gelatin (GEL) as the precursor. Benefiting from the cross-linked (160 °C, vacuum) structure, the homogenized and lyophilized 3D nanofiber-aerogel scaffold with preferable mechanical strength is capable of refraining the volume collapse in humid vitro. Intriguingly, compared with traditional electrospinning scaffolds, the authors' 3D nanofiber-aerogel scaffolds possess enhanced water absorption (1100-1300%), controllable aperture (50-100 µm), and excellent biocompatibility (optical density value, 0.953 ± 0.021). The well-matched aperture and nanostructure of the scaffolds with cells enable the construction of limbal bio-engineered tissue. It is foreseen that the proposed general method can be extended to various aerogels, providing new opportunities for the development of novel limbal bio-engineered tissue.

Limbal Bio-Engineered Tissue Employing 3D Nanofiber-Aerogel Scaffold to Facilitate LSCs Growth and Migration.

Purpose: (1) To measure the corneal endothelium-Descemet membrane (EDM) layer thickness in Descemet membrane detachment (DMD) patients in vivo using high-definition optical coherence tomography (HD-OCT), and to investigate its correlation with age. (2) To explore whether the detachment time will affect the EDM thickness. (3) To explore whether the EDM thickness of cornea with DMD was different from that without DMD. Participants: Patients with DMD were divided into three groups. Group 1 included twenty-three patients whose Descemet membrane (DM) was partial or complete detached from the corneal stroma after various ocular surgeries. Group 2 included eight patients from group 1 who underwent twice HD-OCT examination on different days before the DM reattached to the stroma. Group 3 included nine patients from group 1 who had clear grayscale boundary between the DM and stroma in HD-OCT images after DM reattachment. Methods: All patients underwent HD-OCT and EDM thickness was measured using Image -Pro Plus 6.0. In Group 1, regression analyses were used to evaluate the correlation between EDM thickness and age, and the thickness difference between the ≤50-year-old group and the >50-year-old group was analyzed by independent sample t-test. In Group 2, paired samples t-test was used to check whether detachment time would affect EDM thickness. In Group 3, paired samples t-test was used to check whether the EDM thickness of cornea with DMD was different from that without DMD. p < 0.05 was considered significant. Results: In Group 1, the EDM thickness measured on the first post-operative day was 27.8 ± 3.6 μm, and a positive correlation was found between EDM thickness and age (r = 0.619, p < 0.05). The EDM thickness of ≤50-year-old group and >50-year-old group were 23.9 ± 3.2 and 29.2 ± 2.6 μm, and there was a significant difference between the two groups (p = 0.001). In Group 2, the first measurement of EDM thickness was 27.5 ± 4.0 μm, the second measurement was 27.6 ± 4.2 μm, the interval between the two measurements was 2.1 ± 1.6 days, and there was no significant difference between the two measurements (p = 0.328). In Group 3, the EDM thickness with DM detachment was 28.3 ± 3.5 μm, with DM reattachment was 23.4 ± 2.4 μm, there was a significant difference between the two measurements (p = 0.002). Conclusions: The EDM thickness in the state of DMD is thicker than its actual thickness in normal cornea, and EDM thickness of the >50-year-old group is much thicker than that of the ≤50-year-old group.

Thickness Measurement of Endothelium-Descemet Membrane in Descemt Membrane Detachment Patients Using High-Definition Optical Coherence Tomography.

Face masks, which serve as personal protection equipment, have become ubiquitous for combating the ongoing COVID-19. However, conventional electrostatic-based mask filters are disposable and short-term effective with high breathing resistance, causing respiratory ailments and massive consumption (129 billion monthly), intensifying global environmental pollution. In an effort to address these challenges, the introduction of a piezoelectric polymer was adopted to realize the charge-laden melt-blown via the melt-blowing method. The charge-laden melt-blown could be applied to manufacture face masks and to generate charges triggered by mechanical and acoustic energy originated from daily speaking. Through an efficient and scalable industrial melt-blown process, our charge-laden mask is capable of overcoming the inevitable electrostatic attenuation, even in a high-humidity atmosphere by long-wearing (prolonging from 4 to 72 h) and three-cycle common decontamination methods. Combined with outstanding protective properties (PM filtration efficiency >99.9%), breathability (differential pressure <17 Pa/cm), and mechanical strength, the resultant charge-laden mask could enable the decreased replacement of masks, thereby lowering to 94.4% of output masks worldwide (∼122 billion monthly) without substituting the existing structure or assembling process.

Speaking-Induced Charge-Laden Face Masks with Durable Protectiveness and Wearing Breathability.

To investigate the phenotypic changes of mature corneal epithelial cells (MCECs) that cocultured with limbal niche cells (LNCs) in three-dimensional Matrigel (3D Matrigel) in vitro.

Limbal Niche Cells and Three-Dimensional Matrigel-Induced Dedifferentiation of Mature Corneal Epithelial Cells.

Fungal keratitis (FK) is a kind of serious corneal infection and penetrating keratoplasty (PKP) is needed when medical therapy fails. Although Nectria haematococca is found as endophytes in the roots of some plant species, there has been no report of N. haematococca infection in human.

Article	Year
Limbal Bio-Engineered Tissue Employing 3D Nanofiber-Aerogel Scaffold to Facilitate LSCs Growth and Migration. Macromolecular bioscience\| PubMed ID: 35020979	2022
Thickness Measurement of Endothelium-Descemet Membrane in Descemt Membrane Detachment Patients Using High-Definition Optical Coherence Tomography. Journal of clinical medicine\| PubMed ID: 35329859	2022
Speaking-Induced Charge-Laden Face Masks with Durable Protectiveness and Wearing Breathability. ACS applied materials & interfaces\| PubMed ID: 35362941	2022
Limbal Niche Cells and Three-Dimensional Matrigel-Induced Dedifferentiation of Mature Corneal Epithelial Cells. Investigative ophthalmology & visual science\| PubMed ID: 35499835	2022
Diagnosis of fungal keratitis caused by Nectria haematococca through next-generation sequencing: review of literature and report of three cases. International journal of infectious diseases : IJID : official publication of the International Society for Infectious Diseases\| PubMed ID: 36621753	2023

Yongyao Tan

Biography

JoVE Journal Publications

Other Publications