Construction Measurement
Construction Measurement - Related Videos
10:25
Construction of Models for Nondestructive Prediction of Ingredient Contents in Blueberries by Near-infrared Spectroscopy Based on HPLC Measurements
0 Views •
Cited by 1 •
2016
We present here a protocol to construct and validate models for nondestructive prediction of total sugar, total organic acid, and total anthocyanin content in individual blueberries by near-infrared spectroscopy.
06:33
Construction of a Preclinical Multimodality Phantom Using Tissue-mimicking Materials for Quality Assurance in Tumor Size Measurement
0 Views •
Cited by 1 •
2013
This paper describes in-house procedures of constructing a preclinical multimodality phantom made of tissue-mimicking (TM) materials for quality assurance (QA) of tumor size measurement in animal imaging modalities such as ultrasound (US), computed tomography (CT) and magnetic resonance imaging (MRI).
07:37
Measuring the Flight Ability of the Ambrosia Beetle, Platypus Quercivorus (Murayama), Using a Low-Cost, Small, and Easily Constructed Flight Mill
0 Views •
Cited by 4 •
2018
We developed a low cost and small flight mill, constructed with commonly available items and easily used in experimentation. Using this apparatus, we measured the flight ability of an ambrosia beetle, Platypus quercivorus.
13:48
Design and Construction of an Urban Runoff Research Facility
0 Views •
Cited by 7 •
2014
This paper describes the design, construction, and function of a 1,000 m2 facility containing 24 individual 33.6 m2 field plots equipped for measuring total runoff volumes with time and collection of runoff subsamples at selected intervals for quantification of chemical constituents in the runoff water from simulated home lawns.
10:08
Construction and Setup of a Bench-scale Algal Photosynthetic Bioreactor with Temperature, Light, and pH Monitoring for Kinetic Growth Tests
0 Views •
Cited by 4 •
2017
This paper describes the assembly process and operation of a bench-scale photosynthetic bioreactor that can be used, in conjunction with other methods, to estimate pertinent kinetic growth parameters. This system continuously monitors the pH, light, and temperature using sensors, a data acquisition and control unit, and open-source data acquisition software.
FAQs
Scale drawings represent real construction dimensions at a reduced or enlarged size. A ratio connects the drawing measurement to the actual measurement, allowing users to convert distances consistently. This relationship helps readers interpret technical plans, determine site dimensions, and compare planned positions with physical locations while reducing errors caused by estimating directly from visual proportions.
Standardized units provide a consistent language for recording and communicating dimensions, areas, volumes, angles, and quantities. They allow measurements from drawings, site observations, and calculations to be compared without ambiguity. Consistency also supports reliable material estimates, clearer technical documentation, and more effective checking when different people contribute to the same construction project.
The required formula depends on the geometric property and shape being measured. Length calculations address one-dimensional distances, while area formulas describe surfaces and volume formulas describe three-dimensional spaces. Applying the appropriate relationship converts measured dimensions into quantities needed for planning, such as surface coverage or the amount of space a material requirement may occupy.
A practical workflow begins by reading the plan, identifying its scale and units, and locating the dimensions, angles, and positions that matter. The user then applies ratios or geometric formulas, records the calculated quantities, and compares them with the intended layout. This sequence connects mathematical interpretation with site layout and later verification.
Measured lengths, areas, and volumes can be converted into estimated material quantities for a planned structure. Those quantities provide a mathematical basis for cost planning because required materials can be related to project dimensions. More dependable calculations help identify discrepancies early, support practical decisions, and reduce material waste caused by overestimation or incorrect dimensions.
Quality control uses measured dimensions and instrument readings to check whether completed or laid-out work agrees with technical plans. Verifying lengths, angles, quantities, and positions can reveal calculation or placement errors before they affect later stages. In mathematics education, this application shows how formulas, units, ratios, and recorded observations support decisions in a real setting.