Elevator Free Fall
Elevator Free Fall - Related Videos
03:12
Freezing Point Depression and Boiling Point Elevation
0 Views •
2020
Boiling Point Elevation The boiling point of a liquid is the temperature at which its vapor pressure is equal to ambient atmospheric pressure. Since the vapor pressure of a solution is lowered due to the presence of nonvolatile solutes, it stands to reason that the solution’s boiling point will subsequently be increased. Vapor pressure increases with temperature, and so a solution will require a higher temperature than will pure solvent to achieve any given vapor pressure, including one...
01:05
Free-falling Bodies: Example
0 Views •
2023
An object falling without any air resistance under the influence of gravitational force is said to be in free-fall. For free-falling bodies, the acceleration due to gravity is constant, irrespective of their mass. Free-fall is experienced not only by objects falling downward, but also by all objects whose motion is influenced by gravitational force alone. The dynamics of free-fall motion can be calculated using kinematic equations of motion, since free-fall acceleration is constant. The...
01:07
Free-falling Bodies: Introduction
0 Views •
2023
All objects, neglecting air resistance, fall with the same acceleration towards the Earth's center due to the force exerted by the Earth's gravity. This experimentally determined fact is unexpected because we are so accustomed to the effects of air resistance and friction that we expect light objects to fall slower than heavier ones. People believed that a heavier object had a greater acceleration when falling until Galileo Galilei (1564–1642) proved otherwise. We now know this is not the case.
09:09
Elevated Plus Maze for Mice
0 Views •
Cited by 533 •
2008
The elevated plus maze test is one of the most widely used tests for measuring anxiety-like behavior in mice. Here, we present a movie showing the detailed procedures for conducting the test.
01:21
Repercussions of the Fall in Housing Prices I
0 Views •
2026
The U.S. housing market began to weaken in 2006 after many years of rising home prices. During the housing boom of the early and mid-2000s, home construction increased rapidly. This increased the housing supply, but demand did not keep pace. As supply exceeded demand, housing prices began to fall.The decline in home values created serious problems for homeowners. Many had taken out large loans to purchase homes when prices were high. As home prices dropped, many homeowners became “underwater,”...
FAQs
Mass remains a measure of the occupant’s matter, whereas apparent weight depends on the support force from the elevator floor. During the idealized motion, the occupants and elevator accelerate downward together, so the floor provides little or no normal force. This distinction lets students separate mass, gravitational weight, and the sensation of weightlessness.
Gravity does not disappear when the supporting force is removed. Instead, it becomes the force responsible for the shared downward acceleration of the elevator and its occupants. Because both move together under the same acceleration, the passengers do not need the usual upward contact force from the floor, producing reduced apparent weight while gravitational influence continues.
The key difference is the balance of forces. In ordinary supported motion, cable tension or another upward force contributes to the elevator’s behavior and to the contact force experienced by occupants. In the idealized free-fall case, that support is absent, so gravity determines the downward acceleration and the floor force becomes little or negligible.
Begin by identifying gravity, cable tension or other support, and the normal force from the floor. Then determine which forces remain in the idealized situation and relate the resulting net force to the downward acceleration. This approach connects Newton’s laws with the observed reduction in apparent weight and clarifies why the occupants share the elevator’s motion.
A useful procedure is to define the elevator and occupants as the system, list the vertical forces, and decide whether a supporting force is present. Next, apply Newton’s laws to the remaining forces and interpret the normal force as apparent weight. Comparing this result with ordinary supported motion reveals how acceleration changes the passenger’s experience.
The concept provides a physics framework for examining what happens when normal support is lost and how emergency braking changes the motion. It also motivates analysis of motion sensors that detect unusual elevator behavior. These applications connect force, acceleration, and apparent weight to the design and interpretation of safety-related mechanisms.