13.2
Dichte
Dichte ist eine wichtige Eigenschaft von Substanzen, die entscheidend ist, um festzustellen, ob ein Objekt in einem Fluid sinkt oder schwimmt. Ihre SI…
Werden ein Holzklotz und ein Stein mit der gleichen Masse in einen Fluss geworfen, sinkt der Stein, während der Stamm schwimmt. Dies liegt an einer physikalischen Eigenschaft des Materials, die als Dichte bekannt ist.
Die Dichte ist definiert als die Masse eines Objekts pro Volumeneinheit und kann dabei helfen, zu bestimmen, ob ein Objekt in einer Flüssigkeit schwimmt oder sinkt.
Im obigen Beispiel ist die Dichte des Steins größer als die des Wassers und so sinkt er ab. Die Dichte des Holzes hingegen ist geringer und so schwimmt es.
Objekte aus dem gleichen Material mit unterschiedlichen Massen haben die gleiche Dichte.
Wenn ein Objekt eine unterschiedliche Dichte über sein Volumen aufweist oder für eine heterogene Mischung aus zwei oder mehr verschiedenen Materialien, definieren wir eine durchschnittliche Dichte.
Die durchschnittliche Dichte für diese Objekte entspricht der Gesamtmasse dividiert durch das Gesamtvolumen.
View the full transcript and gain access to JoVE Core videos
Q1: What is density and how is it calculated?
Density is a physical property defined as the mass of an object per unit volume. It is calculated by dividing an object's total mass by its total volume. The SI unit for density is kg/m³, while the CGS unit is g/cm³. Density helps determine whether an object will float or sink in a fluid, connecting to density and archimedes principle.
Q2: Why does a stone sink while a wooden log floats in water?
Objects sink or float based on their density relative to the fluid. The stone sinks because its density is greater than water's density, causing it to be denser and heavier per unit volume. The wooden log floats because its density is lower than water's density. This principle applies regardless of the objects' masses.
Q3: What is the difference between homogeneous and heterogeneous substances?
A homogeneous substance has constant density throughout its volume, such as a solid iron bar where any sample has the same density as the average. A heterogeneous substance has varying density, like Swiss cheese containing both solid material and gas-filled voids. For heterogeneous materials, local density describes the density at specific locations.
Q4: How does temperature affect the density of liquids and gases?
Gases have densities that vary considerably with temperature because they expand and contract freely. Liquids, however, have densities that vary little with temperature, so their densities are often treated as constant and equal to their average density. This difference reflects the structural differences between gases and liquids.
Q5: Why do gases have much lower densities than liquids and solids?
Gases have much lower densities than liquids and solids because their atoms are separated by large amounts of empty space. In contrast, the atoms in liquids and solids are in close contact, making their densities roughly comparable. This structural difference explains the significant density variation between phases of matter.
Q6: What is specific gravity and why is it useful?
Specific gravity is a dimensionless quantity defined as the ratio of a material's density to water's density at 4.0°C and one atmosphere of pressure, which is 1000 kg/m³. It provides a convenient, unit-free way to compare densities of different substances without worrying about unit conversions, making material comparisons straightforward.
Q7: Can objects with the same mass have different densities?
No, objects of the same material with different masses have the same density because density is a material property independent of mass. However, objects made of different materials can have the same mass but different densities. For example, a small stone and a large piece of wood might weigh the same but have different densities.