27.6
Kirchhoffsche Regeln: Anwendung
Kirchhoffsche Regeln quantifizieren den Strom, der durch einen Stromkreis fließt, und die Spannungsänderungen entlang der Schleife in einem Stromkreis…
Eine 18-Volt-Batterie wird verwendet, um eine leerlaufende Batterie mit 2 Ohm Innenwiderstand zu laden und eine Glühbirne mit 3 Ohm zum Leuchten zu bringen. Der Strom durch die entladene Batterie und die Glühbirne beträgt 1 Ampere bzw. 2 Ampere in der gezeigten Richtung.
Wie hoch sind der Strom und der Innenwiderstand der Stromversorgungsbatterie und die EMK der entladenen Batterie?
Da es drei unbekannte Größen gibt, sind drei Gleichungen erforderlich.
Die erste Gleichung erhält man, indem man die erste Kirchhoffsche Regel am Übergang "a" anwendet. Dadurch fließt der Strom durch die Stromversorgungsbatterie.
Die zweite Gleichung erhält man, indem man die zweite Kirchhoffsche Regel entlang der äußeren Schleife der Schaltung anwendet.
Die Lösung dieses Ausdrucks ergibt den Wert des Innenwiderstands der Stromversorgungsbatterie.
Die dritte Gleichung erhält man, indem man die Schleifenregel in der linken Schleife anwendet. Das Lösen dieser Gleichung ergibt die EMK der entladenen Batterie.
Das negative Vorzeichen zeigt an, dass die tatsächliche Polarität der Batterie entgegengesetzt zu der angenommenen Polarität in der Schaltung ist.
View the full transcript and gain access to JoVE Core videos
Q1: How do you apply Kirchhoff's junction rule to find unknown currents?
Kirchhoff's junction rule states that the sum of currents entering a junction equals the sum leaving it. Label the current in each branch and assign a direction. If your chosen direction is incorrect, the calculated current will be negative, but its magnitude remains accurate. This rule generates the first equation needed to solve for unknown values in multi-loop circuits.
Q2: What is the correct sign convention when traversing a voltage source in a loop?
When applying Kirchhoff's loop rule, the electromotive force is positive when traveling through a voltage source from its negative to positive terminal. It becomes negative when traveling in the reverse direction. Consistent sign conventions ensure accurate equations and correct solutions for unknown voltages and currents in the circuit.
Q3: How do you determine the potential drop sign across a resistor in a loop?
When traversing a resistor, the potential drop is negative if your loop direction matches the assumed current direction through it. The potential drop is positive when your loop direction opposes the assumed current direction. Applying this sign convention consistently across all resistors in each loop ensures correct linear equations for solving circuit unknowns.
Q4: Why might a calculated battery emf be negative in Kirchhoff's analysis?
A negative emf result indicates that the actual polarity of the battery is opposite to the polarity you initially assumed in the circuit diagram. The magnitude of the negative value is correct; the sign simply tells you to reverse the battery's terminals. This outcome is normal and helps verify your circuit assumptions during analysis.
Q5: How many independent equations do you need to solve a circuit with three unknowns?
You need exactly three independent equations to solve for three unknowns. Apply Kirchhoff's junction rule at appropriate junctions and Kirchhoff's loop rule around distinct closed loops until you have enough equations. The number of independent equations must equal the number of unknowns to obtain a unique solution for currents, voltages, or resistances.
Q6: What is the first step in applying Kirchhoff's method to analyze a circuit?
The first step is to recognize all circuit elements and identify the polarity of each emf source. Then assign labels to all known quantities and symbols to all unknowns. Next, imagine and assign current directions in each part of the circuit. This systematic preparation ensures you have all necessary information before applying Kirchhoff's junction and loop rules.
Q7: How does Kirchhoff's loop rule help solve for unknown internal resistance?
Applying Kirchhoff's loop rule around an outer loop generates an equation containing the unknown internal resistance. By traversing the loop and accounting for all emf sources and resistive drops with correct signs, you create a linear equation. Solving this equation algebraically yields the internal resistance value, which cannot be found using the junction rule alone.