Interne Belastungen in Strukturgliedern: Problemlösung

The three main internal loadings are normal force, shear force, and bending moment. Normal force acts perpendicular to the cross-section, shear force acts parallel to it, and bending moment causes rotation. Engineers calculate these internal loadings to ensure structural members can support applied external forces without failure.

Reaction forces are determined using the moment equation about a support point and substituting known values. For the example beam, the moment equation about point O yields a reaction force of 1.87 kN at point C in the horizontal direction. These reaction forces are essential inputs for calculating internal loadings at any section along the beam.

A free-body diagram isolates a beam segment by passing an imaginary line through the analysis point, revealing all forces and moments acting on that section. Drawing the diagram with the segment containing minimum unknown forces simplifies equilibrium equations. This visualization enables systematic application of force and moment equilibrium to solve for internal loadings accurately.

A negative normal force, such as the -5.12 kN calculated at point A, indicates that the internal force acts opposite to the assumed direction on the cross-section. The magnitude remains 5.12 kN, but the negative sign signals compression rather than tension. This sign convention helps engineers understand whether the member experiences compression or tension at that location.

Equilibrium equations state that the sum of forces and moments must equal zero. By summing vertical forces on the free-body diagram segment, shear force is determined to be 1.5 kN. Applying the moment equation yields the bending moment of 8.94 kN·m. These equations systematically convert known external loads into internal stress resultants.

Beam weight acts vertically at the center and must be resolved into horizontal and vertical components to apply equilibrium equations correctly. For an inclined beam at 53.13°, these components affect both reaction forces and internal loadings. Resolving weight ensures all force directions align with the coordinate system used in calculations.

Calculating internal loadings ensures structural members can withstand applied forces without failure. Engineers use normal force, shear force, and bending moment values to select appropriate materials and cross-sectional dimensions. This problem-solving process is crucial for designing safe, efficient structures that meet performance requirements.